Used Heating Cabinet for sale (16,010)

Condition: used, This listing is for the Thermo Scientific A8150001 Gemini AS Heated Slide Stainer The unit is in full working condition and is ready for immediate use Cedpfx Aloyuylhj Iogt The Thermo Scientific Gemini AS Automated Slide Stainer (Model A81500001) is a high-performance staining system designed for histology and pathology laboratories requiring reliable and reproducible slide preparation. This automated staining instrument simplifies laboratory workflows by processing multiple slide racks simultaneously while maintaining consistent staining quality. The A81500001 model includes integrated heated stations, allowing slides to be dried efficiently during staining protocols. The Gemini AS supports a wide range of histological staining procedures and can be programmed for customised protocols, making it suitable for routine staining as well as specialised laboratory applications. Its high capacity and flexible configuration make it ideal for laboratories handling moderate to high sample volumes. With multiple reagent stations and automated timing control, the system reduces manual handling and ensures consistent staining results, improving overall laboratory productivity. Key Features Automated slide staining system for histology laboratories 5 heated stations for slide drying Capacity for up to 12 slide racks Each rack holds up to 20 slides Up to 26 reagent stations Programmable staining protocols Consistent and reproducible results Ideal for pathology, research, and clinical laboratories

Condition: used, Year of construction: 2006, Wood chip boiler, industrial heating underfeed combustion Gilles UTSK 450, output 450 kW (can be increased to 550 kW as it is the same build size), year of manufacture 2006, hot water system with maximum safety temperature 95°C, includes pneumatic cleaning, includes feed auger with backfire protection, includes multi-cyclone separator, includes flue gas fan, includes bunker discharge 5x5 m, includes control cabinet. System is ready for collection, full documentation and data sheet available! Cjdpfx Aovgf Ibjl Isgt

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Cgsdpsyt Ihbjfx Al Ijt System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: excellent (used), Year of manufacture: 2022 580 x 890 x 600 mm (W x D x H) rollbar Cgsdpfx Aloy Edk Do Iot

Condition: excellent (used), Year of manufacture 2022 600 x 600 x 830 mm (W x D x H) Cgsdpfxey Edgxj Al Ist

Condition: excellent (used), Connection 220 V Schuko 1.6 kW 250 °C Cedpfx Aoy Edafjl Iogt Class 2 Heating chamber stainless steel 420 x 300 x 355 mm WDH Overall dimensions 710 x 450 x 530 mm WDH

Condition: good (used), Warming cabinet, plate warmer, stainless steel warming cabinet Cgedpfx Alsyvquqs Iot -Manufacturer: GGG Gastro Großküchentechnik, stainless steel warming cabinet -Interior dimensions: 1225/620/H580 mm with adjustable intermediate shelf -Temperature range: 30°C and 90°C, continuously adjustable -Dimensions: 1400/730/H850 mm -Weight: 72 kg

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 1300 mm Measurements height 2500 mm Machine weight 1540 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Table Table load 400 kg Additional Equipment Cjdpfxjx D Inbe Al Isgt Max. Electrode Weight: 80 kg This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Application Types EDM

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Carrera 2000 PC Cgodpfx Aed I Ncgjl Ist stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: used, Meurer heat shrink tunnel adjustable temp, variable speed, aperture 400mm x 350mm, mobile frame, Codpodmn Umsfx Al Iegt

Condition: used, functionality: fully functional, Year of construction: 2008, Bitumen tank, electric Manufacturer: Westhydraulik Year of manufacture: 2008 Codpfxsy Hf Tco Al Isgt Capacity: 60 m³

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: Codovtl Hqopfx Al Iogt 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Condition: excellent (used), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heat Chamber The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Cgsdpjytrzfjfx Al Iot Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. Thanks to its large useful chamber, it is possible to process large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Typical fields of application: Industrial production Plastics and metal processing Component drying Heat treatment Testing technology / Material testing Laboratory and research applications The system is of robust industrial quality and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety classes: TB Class 1 TWB Class 2 Interior: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm Load capacity: Internal chamber load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional data: Minimum exhaust air volume: 600 m³/h Reduced exhaust air volume: 150 m³/h Purge time: 465 s Total steam space: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Selectable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Any further questions can be answered by phone.

Condition: good (used), Year of construction: 2013, Complete heating system, but without fuel extraction from the storage room, with cyclone for flue gas dust removal, already dismantled. Cgodpfx Aloytra Ue Iot

Year of construction: 1986, condition: used, machine/vehicle number: 860918, cooling capacity: 11165 W/9600 kcal Cgodpfxobac Tmo Al Iot max. outside temperature: 32°C max. working pressure: 24 bar electrical connection: 380 V, 4,12 kW place requirement: 860 x 760 x 1360 mm

Year of construction: 1978, condition: used, machine/vehicle number: 5181, temperature: + 10 to + 80°C usable space: width 1200 mm depth 1600 mm height 1750 mm electrical connection: 220 V space needed: 1550 x 1900 x 2200 mm high Cjdpfe Dq Adox Al Iegt weight: 500 kg

Year of construction: 1981, condition: used, machine/vehicle number: 23066, temperature: 0 to +120°C usable space: width 1000 mm depth 950 mm height 800 mm electrical connection: 380 V, 9,5 kW space needed: 1730 x 2330 x 1980 mm high Csdpfx Als Dqz Re Iegt weight approx. 1000 kg

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high tested maximum temperature: 1000°C electrical connection: 400 V, 13 kW space requirement: 550 x 1600 x 1830 mm Weight: 492 kg Cgedpfsbn I Tzjx Al Iot

Condition: ready for operation (used), 4 telescopic drawers, size: 450 x 600 mm Cgodpfx Alsixzzrj Iot Height-adjustable drawers, currently for filling heights: 100, 120, 250 and 320 mm Required space: 720 x 550/750 x 1170 mm

Year of construction: 1995, condition: used, Temperature Chamber, Benchtop Test Chamber for Thermal Testing Manufacturer: Heraeus Vötsch Model: HT4002 Year of manufacture: 1995 Test volume: 16 liters Temperature range: -40°C to +130°C Mains voltage: 230V Refrigerant: VK R452a Interface: RS232 Weight: 75 kg External dimensions (WxDxH): 465 x 505 x 625 mm Cjdpfx Ajyyvphsl Ijgt Internal dimensions (WxDxH): 310 x 230 x 205 mm ID: ä16426

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) Cooling Incubator, year of manufacture 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Special added value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Applications) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Continuous temperature runs and thermal cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system - Fire detector with optical and acoustic alarm - Mechanical double-door locking mechanism (secure containment) - Spark protection inside the chamber - Exhaust nozzle with reversible overpressure flap - Ports for external inerting (e.g., nitrogen) Cgodpex Hf A Refx Al Ist - Emergency shut-off / manual activation of the extinguishing system - Ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without the risk of explosion or uncontrolled spread. It is not an abuse or destruction test chamber, but a reliable, standards-compliant test cabinet for realistic operational and fault scenarios. Technical core data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit is exceptional: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see photo) (Subject to modifications and errors in technical data. All information is without guarantee!) If you require further information, please don't hesitate to contact us by phone.

Year of construction: 2020, operating hours: 20 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ?, B-Max 300 Biomass / pellet boiler, directly from the NL importer. System with very few operating hours. In good condition, see photos. Cedpfx Aleyxtazo Iegt

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Cgedpfx Aoykvdljl Ist Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 24288, power: 550 kW (747.79 HP), pressure: 4 bar, nominal heat output: 550 kW (747.79 HP), tank capacity: 1,546 l, operating pressure: 4 bar, Equipment: type plate available, We offer this used MAWERA FU 400 RIA heating system, year of manufacture 2005. Operating pressure: 4 bar Codpfx Alsy D A A Ns Ijgt Output: 440 kW If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Cgsdjyizqnopfx Al Ijt Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer