Used Heating Coil for sale (16,116)

Year of construction: 1990, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger -Manufacturer: Bloksma, heat exchanger shell and tube heat exchanger -Type: B13-2Z-04 B13-3H7-15D Gedswu Tk Sepfx Akhekd -Operating pressure: 6.5 / 3.5 bar -Dimensions: 2235/340/H155 mm -Weight: 61 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 more pieces in stock production year: 2020-22 heat output: 23kw gas burner + exhaust fan Gkodpfeq Hu Afjx Akhed pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: IP21 AC 230V 50Hz

Year of construction: 1990, condition: good (used), coil weight: max. 15 t Gedjlimuhopfx Akhekd coil OD: max. 1.800 mm

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø32 x 265 mm, see photos -Item no.: 832 597 65 -Heating power: W -Voltage: V Gjdjlw Azbspfx Akhokd -Number: 2x heating tape available -Price per piece -Dimensions: 270/140/H50 mm -Weight: 1.1 kg/pc.

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,000 kg, heating capacity: 198 kW (269.20 HP), large warm air furnace for firewood and residual materials External dimensions approx. 3.5 m x 1.5 m x 3 m Weight 4 t with control system with warm air blower Godpfxjw Ucfdj Akhjkd

Condition: used, Equipment: type plate available, Electrically heated agitator tank with double jacket and insulation Article number: 10707 Volume: 300 L Type: Vertical, standing on 3 legs Leg height: 220 mm Material (product-contact): V2A stainless steel Design: Electrically heated Operating pressure according to nameplate: ATM (atmospheric) Tank dimensions: Internal diameter: 700 mm External diameter: 950 mm Cylindrical height: 730 mm Total height: 2030 mm Total width: 1120 mm Total length: 1340 mm Equipment: Nameplate: Yes Gkodpfxsw Ic Nie Akhed Discharge to floor distance: 415 mm Outlet valve: Ball valve Outlet diameter: DN40 Opening: 235x750 mm Beam agitator Double jacket: 100 L Insulated Control cabinet Foldable lid 1/2

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg Gedpou Scqbofx Akhjkd

Condition: used, El. heated chamber oven, make Heraeus Gkjdsxlq Tpepfx Akhjd Type: PL 320 Temperature: max. 650°C Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm

Year of construction: 2018, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler Gjdpfx Akexl R Rnohokd -Manufacturer: Jiangsu, heat exchanger type SL-421 -Pump: Aulank CPS-20 1.5 kW -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Gkedpfxsw Dy D Ds Akhjd Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: D32L/8407, Offer Number: D32L/8407 Machinetype: spring coiling machine Make: SCHENKER Type: 20RU Constr. year: 1998 Gksdpfjwzkr Hex Akhsd wire diameter: 0,5- 2 mm Location: In our warehouse

Condition: used, Used agitated tank with insulation Previous application: Pharmaceuticals Item number: 10785 Volume: 300 liters Type: Standing on 4 castors Product-contact material: 1.4571 / AISI316 Design: with insulation Operating pressure (as per nameplate): +0.5 bar Max. operating temperature: +95°C Tank dimensions: Manway: 410 mm Internal diameter: 700 mm External diameter: 800 mm Foot height: 870 mm Total height: 1700 mm Gedpox Ewqdofx Akhekd Total width: 870 mm Total length: 950 mm Cylindrical height: 650 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet diameter: DN25 Distance from outlet to floor: 365 mm Propeller agitator Empty weight: 184 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm Godpfx Akjx Ap Itehokd ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge Gkodozp Rmqjpfx Akhod - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 1,700 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Electric car-bottom furnace for heat treatments on steels (normalizing, annealing, tempering, preheating, etc.) by Pagnotta Termomeccanica srl, Deruta, Italy. Maximum temperature: 1,100°C Usable loading dimensions: 1,250x800xh1,000 mm Capacity: 1,000 liters CE Declaration of Conformity Gksdpjzxxkvofx Akhjd Used and refurbished machine with new electric heating elements The listed specifications are for informational purposes only; the photos depict similar machines. The furnace can be customized according to your specific heat treatment process.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Gkedjzmv Dvjpfx Akhsd Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Gksdpoznca Hsfx Akhed Year of manufacture 2010 with feed with ash discharge with control

Condition: excellent (used), Year of construction: 2002, coil weight: 25,000 kg, coil width: 1,550 mm, sheet thickness (max.): 4 mm, strip width: max. 1.550 mm strip thickness: 0,4 - 4 mm Gedpfoy Nxn Eox Akhskd coil weight: 25 t mandrel Ø: 508/610 mm coil OD: max. 2.000 mm speed: max. 135 m/min working direction: left-> right

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Godpfx Aey Uuu Eskhskd Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: D32U/8477, Offer Number: D32U/8477 Machinetype: spring coiling machine Make: WAFIOS Type: FSE 23 Constr. year: 2001 wire diameter: 0,35-1,6 mm spring diameter: 35 mm output pieces/min: 500 Location: Outside of Europe Gkedpjzd U H Rsfx Akhjd

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: D32U/8478, Offer Number: D32U/8478 Machinetype: spring coiling machine Make: WAFIOS Type: FTU 5.3 Constr. year: 2000 wire diameter: 0,8-5 mm spring diameter: 50 mm feeding length: ∞ output pieces/min: 50 Gedpfxezd U Ihj Akhokd Location: Outside of Europe

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Gksdpfx Aszxqd Ijkhed Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: like new (used), Grundfos NB 32-200/206 Single-stage block pump, centrifugal pump Speed: 2915 min⁻¹ Flow rate Q: 33.7 m³/h Head: 46.3 m Max. pressure: 16 bar You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Gkedpszzllxofx Akhjd Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Cleaning container -Large: cleaning container -Interior dimensions: see photos -Performance levels: 5 -Price: per piece -Number: 2 pieces Godjd Skkyspfx Akhskd -Dimensions: 595/380/H660 mm -Weight: 38 kg

Condition: new, temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t Godpjgyn H Nofx Akhjkd