Used Heavy Duty Screening Plant for sale (10,291)

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Kdodpfxjxhac So Ag Neu Vehicle Type: Platform truck and chassis, suitable for crane installation Chassis Color: Pure White RAL 9010 Cab Color: Graphite Black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 hp) Torque: 2,400 Nm Emission Standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-disc clutch (430 mm) Driving Modes: Efficiency, Manoeuvre, Idle Speed Driving, Rock-Free Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle spacing (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame rail thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic leveling control Spring load capacity: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (adjustable) Disc brakes on all axles Electronic parking brake Tyres & Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte finish Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, seat heating, armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage compartments Interior styling: Moon Grey Sun blinds, tilting roof Various storage solutions USB sockets LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Technical trailer load: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency brake assist Lane departure warning Digital tachograph Advanced navigation system (7-inch) MAN SmartSelect Body Interfaces Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: hydraulic front-axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and government applications as well as flexible body solutions ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Colour: RAL 3020 traffic red, cylinders black Slewing Range Infinitely rotatable Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Linkage System Double linkage system with PROLINK Articulated arm can be overextended up to 15° Overload Protection Electronic overload shutdown FX500 FSC stability control LMB II Emergency stop and visual alarm Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency operation Stabilizers Hydraulically extendable on both sides Support width: 7.79 m Speed Control Dynamic Control – load-dependent Additional Articulated Boom / Jib Type: L214 4x hydraulically extendable up to 10.30 m

Condition: used, mileage: 788,126 km, power: 450 kW (611.83 HP), first registration: 05/2013, overall weight: 26,000 kg, fuel type: diesel, color: yellow, axle configuration: 6x4, maximum load weight: 14,840 kg, empty load weight: 11,160 kg, tire size: 385/65 22,5, wheelbase: 3,400 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2013, operating hours: 788,126 h, tire condition: 70 %, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, number of beds: 1, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, hydraulics, onboard computer, parking heater, sliding door, truck registration, Reference number for inquiries: 68150 Volvo FH 16 * Year of manufacture: 2013 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Electric window lifters * Cab * Air conditioning * Power steering * Sleeper berth * Auxiliary heater (independent vehicle heater) * Stationary air conditioning * Cruise control * Tipping hydraulics * On-board computer * Differential lock * Digital tachograph * CD radio * USB interface * OBU prep (on-board unit pre-installation) * Refrigerator * 2 bunks * AdBlue tank * Fog lamps * Comfort suspension seat * Multifunction steering wheel * Sun visor * Air suspension * Transmission type: Automatic * Suspension: Leaf/Air * Gross vehicle weight: 26,000 kg * Unladen weight: 11,160 kg * Payload: 14,840 kg * Perm. total weight: 26,000 kg * Tire condition 1st axle: 70% – 70% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 60% – 70% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 70% – 70% - Tire size: 385/65 R22.5 * Wheelbase: 3.400 mm * Tire sizes: 385/65 R22.5 * Tire size 1st axle: 385/65 R22.5 * 2nd–3rd axle: 345/80 R22.5 Kdodpfx Aet Ing Sog Neu * Stationary air conditioning * Dual-circuit hydraulics Disclaimer: Subject to change, prior sale, and errors excepted. Further pictures and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing options * Processing of all (export) documents * Provision of export plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialist staff – we will be pleased to advise you.

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. Kdedpfxjxddvne Ag Nsu 125 kg auxiliary crane on spindle box.

Condition: good (used), Essentially consisting of: Feed hopper (15 cbm) with push cart Kedpfx Aot Uzv Heg Nodu Double-deck screening plant with feed chutes and undersize grain discharge belt Various conveyor and stockpiling belts Overbelt magnet Electrical installation with control cabinet

Condition: excellent (used), functionality: fully functional, empty load weight: 600 kg, Year of construction: 2014, load capacity: 1,500 kg, We hereby offer, subject to prior sale, a used universal cable reeling machine / electric ring coiling machine with length measuring device, suitable for respooling and winding cables onto different drum diameters. Manufacturer: Vetter GmbH, Germany Type: Cable Length Measuring Unit LM 20 (suitable for insulated cables) Year of manufacture: 2014 Usable cable diameter: 1 - 20 mm Dimensions of cable length measuring unit: 360 x 280 x 400 mm (L x W x H) Weight of cable length measuring unit: 13.3 kg Type: Cable Winding Unit TR 146 FH Year of manufacture: 2014 Load capacity: 1500 kg Usable cable diameter: 1 - 20 mm Measuring accuracy: Class III, +/- 0.5% at 5 - 40 °C Minimum measuring length: 5 m Reel diameter: 600 – 1450 mm Reel width: 350 – 850 mm Drive power: 2.2 kW Torque: 475 Nm Kedpjvl Hpkefx Ag Nsdu Winding speed: 15 - 80 m/min Machine dimensions: 2470 x 1950 x 1885 mm (L x W x H) Machine weight: approx. 600 kg Note: The above technical details were taken from the operating manual, manufacturer's brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: - Universal cable respooling machine - Cable length measuring device - Swivelling roller guide for dispensing from higher cable racks - Holder for overhead power supply - Machine documentation (available in German only) Field of application and condition: The system is suitable for respooling (winding) energy cables, communication cables, and data cables from drum to drum. The cable length is measured during the winding process. The system remained in operation until the end of 2024, is fully functional, and in good condition. Sale is subject to prior sale, on a bid basis, without warranty or guarantee, against advance payment, ex works. We would be pleased if this machine is of interest to you and look forward to receiving your purchase offer. Your service team, Mertens & Frowein GmbH

Condition: used, Year of construction: 2005, turning diameter over bed 935 mm turning dia. over face-slide 600 mm greates pass round over bed 1.600 mm turning length 2.000 / 3.000 mm control 810D / Manual Turn Siemens centre height 475 mm max. workpiece weight between centers 6.000 kg turning speed range - main spindle 10 - 1.100 min/-1 transmission ratio 4 power capacity - main spindel 37 kW max. Torque 8.000 Nm spindle diameter in front bearing 190 mm spindle bore 155 mm type Parat 4 pos. RD 4 number of cross-slides 1 x-axis 850 mm z-axis ca. 2.100 mm quill stroke 300 mm diameter of quill 140 mm capture MK 6 Kjdpfx Aew Spbmeg Nodu rapid speed X: 8 m/min rapid speed Z: 6 m/min weight of the machine ca. 10,5 t dimensions of the machine ca. 8,00 x 2,30 x 4,00 m Semi-frontal Lathe KREWEMA - HFDM 45 475 x 2000/3000

Condition: new, overall weight: 33,400 kg, empty load weight: 3,400 kg, maximum load weight: 30,000 kg, tire size: 559x300, Year of construction: 2025, TPW 30 VL - LK Kdjdpjhbmu Iefx Ag Neu Bogie steering Front axle Trailing axle Rigid 6000 mm Long 2200 mm wide Drawbar with drop safety and height adjustment Wheels bandages 559x300 with steel rims 5 stops on each side for load securing Painting RAL 5010 blue Transport floor wood 40 mm recessed Screwed #heavy duty transport #internal transport systems #heavy duty trailers 6-100 tons #heavy duty trailers from 3 tons up to 100 tons #heavy duty transport platform trailers #platform heavy duty trailers #all wheel steering #transport trailers

Condition: used, Heavy-duty trailer, used Manufacturer: Steinbock Type BWB Year: 1980 Technical Data: Brand: Steinbock GmbH Moosburg Type: BWB 39 00061 Year of manufacture: 1980 Loading area front and rear each: 2.2 x 1.3 m Trailer is in the middle approx. 1m telescopic Permitted axle load front: 900 kg Permitted axle load rear: 960 kg Permitted payload: 1500 kg Kdedpfxownm Dfs Ag Neu Dimensions: L 4.7 plus drawbar x W 1.4 x H 0.6 m Total weight: 1860 kg All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2270 mm turning length 12000 mm control SIEMENS 820T power capacity 185 kW faceplate diameter 1850 mm turning speeds 1,6 - 175 U/min max. workpiece weight 70000 kg Technical data Working range Maximum turning diameter over support: 2270 mm Maximum swing diameter over bed: 2400 mm Maximum turning length with 30 mm slide: 12000 mm with 80 mm slide: 11,500 mm Clamping diameter in the headstock faceplate: 300 - 2,040 mm Clamping diameter in the tailstock faceplate: 300 - 1,300 mm Mounting in roller blocks: 1000 - 1750 mm Load capacity: 35 t Mounting in roller steady rests: 800 - 1100 mm Load capacity: 30 t Mounting in roller steady rests of M0911: 300 - 1100 mm Maximum workpiece weight: 70,000 kg Main drive, faceplate Faceplate diameter: 2,200 mm Faceplate speeds, infinitely variable in 4 stages: 1.6 - 175 rpm Maximum torque at rated speed: 220,000 N·m Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of upper support: 735 mm Travel of plunge slide, 35 mm wide: 720 mm Travel of the face slide, 80 mm wide: 720 mm The slides can be adjusted continuously Rapid traverse, longitudinal: mm/min Kdedjxc Ny Aspfx Ag Neu Rapid traverse, face: mm/min Feed rates, continuous, longitudinal: 0.05 - mm/min Stepless feed, face: 0.05 - mm/min Max. cutting force at support: 200000 N Face slide: Heavy-duty machining and BTS system Tailstock Diameter of faceplate (removable): 1850 mm Clamping diameter of faceplate: 1300 mm Flange centre point angle: 70° Quick adjustment: 2000 mm/min Special equipment CONTROL SIEMENS Slider measuring system Boring holder with boring bar holder ø 300 mm

Condition: like new (used), Year of construction: 2021, Polin/ Ram K160 160L Planetary Mixer capacity, 6kw, Programmable controls with variable speed and 99 recipe memory, automatic bowl lift, standard grey painted finish With an additional bowl to suit. Only used for 1 year - Condition as new Kdjdpowu Dpfjfx Ag Nsu

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering, suspended -Platform: 1800/950/H590 mm -Load capacity: 3 t -Tires: 305/415x90 -Drawbar: reversible, trailer coupling on both sides -Total dimensions: 2820/950/H590 mm Kedpfx Aeub D Rfsg Nedu -Weight: 362 kg

Year of construction: 2018, condition: used, Screening plant for wood chip screening Condition: used Design: semi-mobile on trailer (for agricultural traffic) Screening throughput: approx. 20 - 25 m³/h Fractions: 3 Comprises: - Feed hopper (volume approx. 6 m³) with 2 discharge augers (custom-built) - Screening machine type ASM-200 (3 fractions) Screening throughput: approx. 20 - 25 m³/h Fractions: 3 Ksdexmvraspfx Ag Nodu incl. perforated screens D = 40 mm + D = 5 mm - Trailer / subframe (option) - Electrical installation - Emergency generator Sale of the screening plant on behalf of the customer. Location of the screening plant: 3185 Schmitten, Switzerland

Condition: new, Year of construction: 2025, TPW 30 AL - AS with all-wheel axle steering, rollers 559x300 Transport deck made of Douglas fir wood, 40 mm thick, Dimensions Kodpehbmukefx Ag Nedu Length 4000 mm Width 2000 mm Drawbar 1600 mm with 40 mm towing eye and drop guard with height adjustment Paint finish RAL 2000 #In-plant transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 tons to 100 tons #Heavy-duty transport platform trolleys #Platform heavy-duty trailers #All-wheel steering #Transport carts

Condition: used, functionality: fully functional, empty load weight: 5,000 kg, Year of construction: 1988, total length: 12,200 mm, load capacity: 40,000 kg, construction width: 2,500 mm, Heavy-duty trailer Condition: Ready for use and fully operational Kodpfoxa Iqnjx Ag Nedu Technical condition: normal Description: 4 units available

Condition: good (used), Regallager Kedpsxfby Hsfx Ag Nsdu

Condition: used, mileage: 590,000 km, power: 375 kW (509.86 HP), first registration: 10/2014, overall weight: 27,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, * DAF XF510 FTT tractor unit Kedpfx Aexngznsg Nodu * First registration 10/2024 * 590,000 km * Euro 6 * Automatic transmission * 6x4 axle configuration * Leaf-air suspension * Tipper/low-loader hydraulics, 2 circuits * ZF intarder * Air conditioning * ACC adaptive cruise control * Load area camera * Heavy-duty tractor unit, gross combination weight 70,000 kg * Unladen weight: 9,926 kg * Max permissible weight: 27,000 kg * Wheelbase: 3.25 m * Transmission only shifts the low range!

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering -Platform: 2500/1255/H490 mm -Load capacity: 11 t Kdsdpfx Ast Rbkceg Nsu -Tires: solid rubber -Number: 4x transport trolleys available -Price per piece -Total dimensions: 4360/1255/H490 mm -Weight: 780 kg/pc.

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Kdsdpst Ei Huefx Ag Nju Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: new, Year of construction: 2025, TPW 8000 AL - Ace industrial heavy duty transport trailer Kdodpfxohbicwj Ag Nsu length 6000 mm width 2000 mm Payload 8000 Kg All-wheel steering, wooden floor 30 mm, drawbar 1150 mm with 40 bolts, tires 425x150, paint RAL 2000, double-acting chock, stop 6 pieces on each side for load securing.

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW 2025 MODEL • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm • Fifth-wheel coupling with sliding device and self-lubricating (Type Jost JSK), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all necessary chassis modifications for crane installation, removal and reinstallation of ancillary components, exhaust system, tanks, etc. Adaptation of the vehicle frame • All chassis and bodywork modifications are carried out in strict accordance with the bodybuilder guidelines of the respective chassis manufacturer, ensuring the highest quality • Complete installation of a special auxiliary frame developed in-house and manufactured from fine-grain steel for crane and body, welded and bolted to the chassis frame, ensuring extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the auxiliary frame, finished to the highest quality and painted in frame colour • Mounting/bolting of the crane and main stabilizer support to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front • Flatbed constructed as a removable steel/welded structure • Approx. length: 380 cm, width: approx. 248 cm • Flatbed body painted in RAL chassis colour • Removable aluminium sideboards by Suer, 600 mm high, anodized finish with steps, removable "Kinngripp" posts • Standard flatbed floor with welded 4 mm steel checker plate, painted in RAL chassis colour • 6 flush, retractable lashing rings rated at 2500 daN per side, adjustable in slotted profile • 4 chain lashing points rated for 6500 daN (2 front, 2 rear on the body) • Solid front wall consisting of welded frame with 4 mm welded steel plate and 5 accessory hooks, approx. 1300 mm high, painted steel design, with 2 welded folding lashing eyes for load securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted) – please specify RAL colours • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted) – please specify RAL colours, size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, 2 rows (as agreed), spaced approx. 80 cm from the front wall and rear • Holders (for support pads, crane pads) made of galvanized steel • Additional stabilizer fitted under chassis • Installation of underrun protection at the rear and additional stabilizer, with installation of hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semitrailers and also at the rear for trailers New Crane, Type FASSI F545 RA 2.27, continuous rotation, completely assembled, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment & crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection log Lighting: • 2 LED-AS integrated into the front wall • 2 revolving beacons on FH roof Kdjdpfx Aoxfdpwjg Neu • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, one left and one right, arrangement by agreement • 4 LED-AS, two left and two right

Condition: used, fixed heavy duty steady rest Center height 1040 mm Inner diameter 480 mm Weight 700 kg Kdsdpfsdbbuisx Ag Neu Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: like new (used), functionality: fully functional, Non-slip heavy-duty pallets. Kdjdpfx Asxk Typog Nju

Condition: refurbished (used), Kuka KR360-2 Kjdpfx Agohy N Rpo Nedu

Condition: used, fixed heavy duty steady rest without top! Center height 1040 mm Inner diameter 610 mm Weight 600 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Kedpfxsdbburo Ag Nedu D - 44143 Dortmund - Wambel

Condition: used, fixed heavy duty steady rest Centre height 1080 mm diameter 250 - 600 mm Weight 1800 kg Kedpsdbbuyjfx Ag Nedu Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel