Used Hermle for sale (97)

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Hnedpfx Anszaf Hujdju - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Hnodeygwz Rjpfx Andou Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, overall weight: 7,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 3, This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details. - Power (40% / 100% Duty Cycle): 15 kW / 10 kW- Rapid Traverse (X, Y, Z): 35 m/min- Coolant System: 300 L – 40 L/min at 3 bar- Operation Voltage: 400 V / 3~ 50 Hz- Control Voltage: 24 V-- Total Nominal Current: 44 A- Total Rating: 31 kVA- Electrical Drawing No.: 300.91 K 40.1- Control Unit Operating Hours: 57,705 hrs- Machine Operating Hours: 48,735 hrs- Program Run Time: 19,077 hrs- Spindle Operating Hours: 18,005 hrs- Drive On: 30,073 hrs- Axes in Motion: 17,617 hrs- Included Equipment / Accessories:- Heidenhain TS 642 touch probe system (retrofitted in 2023)- 3 Allmatic vises- Approx. 300 tool holders- 3 jaw chucks- Miscellaneous small parts- Complete machine documentation and service reports- Service History:- 2019: New main spindle fitted- 2023: Retrofitted with Heidenhain TS 642 touch probe system Hnjdpfx Ansz D Tdxjdou Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, overall weight: 4,500 kg, CNC control Heidenhain TNC 426 electronical hand wheel manual swivel head quill coolant device measuring feeler Technische Daten: /technical details X Weg / x travel 875 mm Hedpfezr D Akex Andonu Y Weg / y travel 500 mm Z Weg / z travel 500 mm Drehzahlbereich 2-stufig / spindle speed range (2-steps) 20 - 7000 UpM / rpm Eilgang / rapid feed 15 m/min. Spindelaufnahme / spindle taper SK 40 Tischaufspannfläche / table clamping area 900x528 mm Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2000, condition: used, X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible. Hnodpfxjzvv I Ts Andou

Condition: good (used), Hermle Z 200 A Centrifuge – Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A can accommodate up to 12 x 15 ml tubes with conical and round bottoms. Hjdom Albdepfx Andonu Specifications: Volume: max. 12 x 15 ml / 6 x 50 ml Speed: max. speed/RCF: 6000 rpm / 4185 xg min. speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: button-controlled in 250 rpm increments Speed display: preset and actual speed – digital Run time: max. time: 30 min. / continuous operation min. time: 0.5 min. Preset: 0.5 - 30 min. / “Continue” Time setting: by pressing a button in 0.5 min. increments Time display: remaining time – digital Brake: fixed braking force with soft stop Features: - Microprocessor-controlled - DC motor, covered - ABS plastic housing, impact and chemical resistant Safety: - Lid locking system - Automatic imbalance detection with safety shutdown - Manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inches): Width: 28 / 11.0 Height: 26 / 10.2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Hsdpfxszv Syfe Andjnu Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: used, Travel ranges and axes • X-axis (longitudinal): 600 mm • Y-axis (transverse): 400 mm • Z-axis (vertical): 420 mm Spindle • Speed range: 20 to 4,000 rpm • Tool holder: SK 40 (ISO 40) • Milling head: Manual • Spindle drive power: approx. 6 – 7 kW Work table • Clamping area: 900 x 460 mm • Max. table load: 400 kg • T-slots: 7 pieces (standard 14 mm H7, spacing 63 mm) Feeds and speeds • Working feed (X/Y/Z): 1 to 5,000 / 6,000 mm/min • Rapid traverse X and Y axis: 7 m/min • Rapid traverse Z axis: 6 m/min Electrical connection data and dimensions • Total power requirement: approx. 12 – 13 kW • Machine weight: approx. 2,300 kg • Space requirement (L x W x H): approx. 4.0 x 3.8 x 2.0 m Control system • CNC control: Heidenhain HS412 Hnodpfxozh Evwj Andeu Technical data without guarantee Machine is fully functional and in good condition.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Hnjdeinh Rqjpfx Andju Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Hnjdpfxeyxn Dnj Andju

Condition: good (used), Year of construction: 1999, Universal machining center Machine type: Hermle U 630 S Control: Heidenhain TNC 426 Year: 1999 SPECIFICATIONS Spindle speeds: 20 - 7.000 rpm Spindle power: 7,5 kW Hnodpfxsz Dkrmo Andou milling head: 0 - 90° Travel X-Axis: 875 mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 15 m/min. Feed: (X/Y/Z): 15 m/min. Equipment Tool: SK 40 quill range: 75 mm Table size: 900 x 528 mm Power consumption: 14 KW Machine weight: 4.500 kg Req. space (LxBxH): 2,3 x 2,0 x 2,1 m

Condition: ready for operation (used), Year of construction: 1995, Technical data HERMLE UWF 1202 H Travel in X-axis: 850 mm Travel in Y-axis: 630 mm Travel in Z-axis: 500 mm Table size: approx. 1,200 × 550/560 mm Max. table load: 700 kg Spindle mount: SK 40, DIN 69871 Spindle speed: 20–5,000 rpm Spindle power: approx. 11.5 kW Tool changer: HTC, 34 positions Hnsdpfxsz H Azro Andsu Control system: Heidenhain TNC 426 Total power consumption: 22 kW/kVA Weight: 6,800 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,572 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,310 mm, total width: 2,504 mm, table width: 528 mm, table length: 900 mm, table load: 400 kg, overall weight: 4,800 kg, spindle speed (max.): 7,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 40, product length (max.): 2,310 mm, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details. • Working hours (from display): • Control on: 68,311 h • Machine on: 65,234 h • Program run: 13,572 h • Spindle Speed Range: 20 - 7000 rpm (stepless) • Taper / Tool Holder: SK 40 (similar to DIN 2079 / DIN 69871 / DIN 69872-19) • Tool Clamping: Hydromechanical (Clamping Force: 10 kN) Hedpfx Aney H Irbodjnu • Spindle Diameter Front Bearing: 55 mm (Horizontal/Vertical 80/55 mm) • Feed Rate (X, Y, Z): 1 - 2000 / 15000 mm/min • Feed Force (80% Duty Cycle): 8000 N • Rapid Traverse (X, Y, Z): 15 m/min • Table dimensions: 900 x 528 mm • Swivel Range Spindle Head: 0 - 90° • Quill Stroke (Manual): 75 mm (Quill Diameter: 100 mm) • T-Slots: 7 slots, Width 14 H7 mm, Pitch 63 mm • Tool Changer: Vertical Tool Changer HTC 16 (16 pockets) • Noise Level: 75 dB (A) • Total Floor Space Requirement: 5.00 m² • Floor Load: ca. 964 kg/m² Technical Specification Taper Size SK 40

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg Hnodpfx Aew Sv Iasndsu - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Accessories and Equipment: - HS 401 contour control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Hnjdpfx Aneynw Ersdeu Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 H Year of Manufacture: 1995 Operating Hours: 46,680 Control System: HEIDENHAIN TNC 426 Travel distances X/Y/Z: 600 x 450 x 500 mm Rotary table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Hjdpfx Anjv Rpr Sodjnu Machine dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 121026

Year of construction: 1989, condition: ready for operation (used), X-axis travel: 700 mm, Y-axis travel: 550 mm, Z-axis travel: 500 mm, spindle speed: 25 to 4200 rpm, three speed ranges, feed rate: 1 to 5000 mm/min, rapid traverse in X, Y and Z: 10 m/min, vertical quill travel: 95 mm, clamping table dimensions: 1000 x 500 mm, spindle motor power: 12 kW, connected load: 18 kW, control system: Heidenhain TNC 355, length: 4260 mm, width: 4400 mm, height: 2300 mm, weight: 3.5 t, operating hours: 31,248 h. The machine is equipped with an SK40 tool spindle in accordance with DIN 2079, a swivelling spindle head, a spindle head that can be swung away for machining with the horizontal spindle, an outboard support for horizontal machining, direct measuring systems, a coolant system with a 100 litre reservoir, approximately 38 tool holders, most of which are fitted with tools, a table with tool holders, a workbench with cabinet, various hand tools, various clamping devices, a three-jaw chuck with clamping ring and documentation. The screen has burn-in marks but is still readable. An on-site inspection is possible. Hedpfx Aezrn Ikjndonu

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,295 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details. Hnedozbu I Dopfx Andou • Machine Type: Universal Milling Machine • Condition: Very good / Fully operational • Control System: Heidenhain TNC 415

Condition: like new (used), Year of construction: 2003, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Heidenhain iTNC 530 tool taper HSK 63 voltage 400 V control voltage 24 V weight of the machine ca. 10,5 t - Current configuration C 40 U: o Vertical machining center o 4 axes o Travel ranges: X 850 mm, Y 700 mm, Z 500 mm o Table size: X 1070 mm, Y 700 mm o Carousel tool magazine, 40 positions o Max. tool length in magazine: 300 mm o Spindle: HSK63, 10,000 rpm, 25 kW, 159 Nm o Coolant system: AK, IKZ 40 bar, 1,000-liter capacity, steel filter o Blow-off air IK & AK o MMS system MHT o Scraper belt chip conveyor o Polycarbonate disc without Rotoclear o Heidenhain iTNC 530 machine control o Emulsion mist extraction (Preparation) Hodpfx Aez Ebrajndsnu o Installation dimensions with coolant system: 3,930 mm x 4,400 mm x 3,040 mm o Laser measurement system for tools, including breakage detection o 3D measuring probe o Spindle hours: 14,578 h o Machine hours: 47,069 h

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Hnedpjt Ifm Nefx Andsu Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CNC Vertical Machining Center HERMLE B 300 V With Heidenhain iTNC 530 path control Year of manufacture: 12/2010 Travel ranges: X 800, Y 600, Z 500 Spindle speed range: 20 – 15,000 rpm, stepless With the following accessories: Fixed angular table, 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions (SK 40) IKZ 40 bar Chip conveyor Coolant system Manual cabinet door, manual cabinet roof Polycarbonate safety screens Electronic thermal compensation iTNC 530 Electric hand control module HR 410 3D measuring probe Renishaw Control cabinet cooling unit (RITTAL) Spindle oil cooler 4 adjustable machine feet Hnsdpezf Ik Eofx Andju Operating manuals

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Hjdpfx Ansxwcu Asdenu

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 S Year of Manufacture: 1995 Operating Hours: 65,071 Control System: HEIDENHAIN TNC 426 Hnjdpfx Aov Rxa Ssndsu Working Area X/Y/Z: 600 x 450 x 500 mm Spindle Speed Range: 20 - 6,300 rpm Tool Holder: SK 40 M & H 3D Probe (for workpiece probing) Vertical-Horizontal Milling Attachment Drilling Spindle Coolant System Rotary Table: 900 x 458 Weight: 4,000 kg Machine Dimensions: L x W x H, approx.: 3,900 x 2,000 x 2,000 mm 121026ä

Condition: excellent (used), Year of construction: 1996, x-travel 800 mm Hnodjy Tyznspfx Andou y-travel 600 mm z-travel 500 mm

Condition: good (used), BHG Hermle CNC milling machine Type: UWF 1000 Control: Heidenhain TNC 355 X-path: 700 mm Y-path: 550 mm Z-path: 500 mm Bed: 490 x 1000 mm Spindle: ISO 40 Speed: 3150 rpm Year of manufacture: 1988 Including documentation and parameters Dimensions: 230x200x220 cm LxWxH Hsdpoqwgzbsfx Andenu Weight: approx. 4000 KG