Used Hermle C 30 U for sale (157)

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Gjdpsv Hmdqofx Ag Njuh Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: good (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Machine type: Machining center Manufacturer: HERMLE Type: U 740 Control: HEIDENHAIN iTNC 530 Serial number: 16165 Year of manufacture: 2003 Production times Switch-on time: 86,672 hours Working time: 34,362 hours Spindle running time: 27,804 hours Axes and table Total number of axes: 5 Table length: 900 mm Table width: 500 mm Number of T-slots: 8 Distance between T-slots: 65 mm T-slot width: 14 mm Max. Workpiece weight on the table: 700 kg Longitudinal travel (X-axis): 915 mm Transverse travel (Y-axis): 500 mm Vertical travel (Z-axis): 500 mm Workpiece size max. Length: 900 mm Width: 500 mm Height: 500 mm Tool changer Number of tools: 16 Tool diameter max.: 125 mm Diameter with free secondary positions: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Milling head Swivel range: -5° to +95° Tool holder: SK 40 Spindle Speed infinitely variable from: 20 rpm Gusdeu Dnitjpfx Ag Njh to: 12,000 rpm Feed rates Rapid traverse lengthwise: 30 m/min Rapid traverse: 30 m/min Vertical rapid traverse: 20 m/min Connections and power Compressed air connection: 6 bar Electrical connection: 400 V, 50 Hz, 3-phase Spindle power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB(A) Dimensions and weight Machine weight approx.: 7,300 kg Dimensions (L x W x H): 2,760 mm x 2,390 mm x 2,370 mm EQUIPMENT Three-jaw chuck Ø 200 mm Workpiece probe: HEIDENHAIN TS 640 Dividing head 4th axis: HOFMANN, type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Control cabinet Air conditioning unit Machine can be inspected assembled and energized for inspection after consultation.

Condition: excellent (used), Year of construction: 2000, DESCRIPTION Hermle C 800 V CNC vertical machining center was built in 08.2000 in Germany. The milling center operates in three axes and the maximum X / Y / Z travels are 800, 600 and 500 mm. The machine is equipped with a Sinumerik 840D numerical control with a LAN cable to an external computer. In addition, the lathe is equipped with, among others: Chip conveyor, Hydraulic clamping, Magazine for 87 tools, Turning finder and Control cabinet air conditioning. The spindle rotates at a maximum speed of 15,000 rpm. Spindle hours approx. 4500 h. The total weight of the milling center is approx. 7 tons. Technical data of the Hermle C 800 V CNC milling center - Travel X / Y / Z axis: 800/600/500 mm - rapid traverse: 35 m/min - maximum spindle speed: 15.000 rpm oil mist extraction - spindle power: 19 kW - operating voltage: 400V; 3PH; 50Hz - control voltage: 220V AC; 24V DC - machine dimensions (L x W x H): 2,3 x 3 x 2,65 m - Total weight: 7000 kg Equipment of the Hermle C800V CNC milling center - CNC control: Sinumerik 840D - Tool magazine capacity: 87 pieces - Lamp sockets: SK40 - cooling pump through the tool: 40 bar - control cabinet air conditioner - rotating viewfinder - chip conveyor Gujdpfx Agoiva Dks Njh Separately additionally available with to see on the photos! tool presetter Various SK40 holders Touch probe Heidenhain TS32 Neuwetig

Condition: ready for operation (used), Year of construction: 1996, operating hours: 48,522 h, General Data Machine weight 7000 kg Control Unit Brand Heidenhain 430 Main Drive Number of spindles 1 Gsdpfx Agswdy Uio Nsuh Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 500 mm Z-Axis Movement 530 mm Media Power consumption 31 kVA This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1999, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm total power requirement: 35 kW weight of the machine ca.: 6,5 t table-size: 600 x 370 mm tool taper: ISO 40 tool diameter: 80 mm Guodpfxjt Rmffe Ag Neh tool length - max.: 250 mm no. of tools in magazin: 30 speeds: 12.000 U/min feed power: 6000 N kp power capacity: 9,0 kW 5-Axis CNC Milling Machine Spindle: 15113h *

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Godpfx Agevw Sdqe Nsuh Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: Guedpfx Asxgukbsg Noh - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2006, Opportunity to purchase this outstanding 5-axis HERMLE C30U including RS automation, an additional tool magazine ZM157 and multiple pallets. Available for immediate delivery and can be inspected in operation upon appointment. More information on request. Control HEIDENHAIN iTNC 530 X-axis travel 650 mm Y-axis travel 600 mm Z-axis travel 500 mm Spindle speed range 18000 rpm 1/MIN Spindle hours 54225h Tool taper SK 40 Tool Magazine Additional magazine ZM157 (157 positions) Nc swivel rotary table diameter 280 mm Features: Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided Oil Mist Extraction: Provided Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Table axis: a-axis off-center Table specification: 6-way rotary feed through Internal coolant supply: 80 Filter: paper belt filter Conveyor: scraper belt conveyor Automatic cabin door: yes Polycarbonate safety glass: windows Gusdjxbr Rhspfx Ag Nsh Frequency: 50 hz Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2004, Manufacturer: HERMLE Type: U 1130 Year of manufacture: 2004 Control: Heidenhain iTNC 530 Machine weight: approx. 8500 kg Tool holder: SK 40 X travel: 1300 mm Y travel: 720 mm Guedpov S Alnjfx Ag Noh Z travel: 630 mm Speed range: 18000 rpm Max. table load: 700 kg Operating hours: 50,775 Spindle hours: 21,654 Space required: approx. 3600 x 4500 x 2800 mm Table size: 800 x 1000 Number of tools in magazine: 28 positions Internal coolant supply: 80 bar 3D measuring probe: TS 640 5 axes simultaneous

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 Gjdpfecxxntsx Ag Njuh turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: like new (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 900 mm, table length: 650 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 4,329 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 32, tool length: 300 mm, tool diameter: 80 mm, tool weight: 80 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This HERMLE C30V is almost like new, with only 4,329 spindle hours! The machine is in a very well-maintained condition and can be inspected under power at our premises! This machine comes factory-equipped with: - Heidenhain TS440 probe. - Lockable roof (folding mechanism). - Original documentation. - Spindle and coolant chiller. Gusdpfxoxfhymj Ag Neh

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, table width: 520 mm, table length: 900 mm, overall weight: 4,500 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Table size: 900 x 520 mm MACHINE DETAILS Control: Heidenhain Installation dimensions LxWxH: 3.16 x 3.62 x 2.37 m Weight: 6,000 kg Electrical data Guodpfx Agjxl Sy De Njh Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total rated current: 23 A Total power: 16 kVA Weight: 4,500 kg

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Gujdpfx Agjxg Rxbj Neh

Condition: used, machine/vehicle number: 8317, This CNC machining center Hermle UWF 600 is being auctioned online in our industrial auction / machinery auction due to the closure of Bellinger Feinmechanik & Werkzeugbau. Gedpfxsxlg Ams Ag Nouh

Condition: used, Year of construction: 1984, x-travel 410 mm y-travel 310 mm z-travel 400 mm table-size 700 x 280 mm control Heidenhain TNC 145 tool adaptor SK40 turning speed range 40- 2.000 U/min rapid speed 1,5 m/min feed speeds 1500 mm/min power requirement 2.2 kW quill stroke 63 mm weight 1,3 t total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions 1,4 x 2,1 x 2,0 m Features: Gujdpfx Agsxlufpj Noh - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t Guodpfxjtqmm Aj Ag Njh dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: excellent (used), Year of construction: 2020, Available from December 2025 Hermle C650U Year of manufacture: 2020 Gedpfx Agewwmlhs Nouh Travels: 1050 x 900 x 600 mm HSK 63 Magazine positions: 42 Spindle speed: 18,000 rpm Control: TNC 640 Probing system: Renishaw Spindle hours: 12,800

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Heidenhain, table width: 480 mm, table length: 900 mm, overall weight: 7,300 kg, Equipment: documentation/manual, TECHNICAL DETAILS Gjdsxl Sunjpfx Ag Nouh Fixed table: 900 x 480 mm MACHINE DETAILS Control: HEIDENHAIN Electrical Data Net weight: 7,300 kg Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total power: 26 kVA Total rated current: 37 A Weight: 6,300 kg EQUIPMENT Tool changer

Condition: like new (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 1,070 mm, table length: 700 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,533 h, spindle nose: SK40, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Once again, a very neat HERMLE C40V coming from a mold making workshop. The machine is in excellent condition and can also be viewed under power at our facility! This machine is standard equipped with: Blum tool laser, Heidenhain TS440 probe, custom-made coolant table, lockable roof (accordion style), original documentation, spindle and emulsion cooler. Godexd U N Sjpfx Ag Njuh

Condition: good (used), machine/vehicle number: 5387, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, mount diameter: 40 mm, total height: 1,900 mm, total width: 1,200 mm, total length: 1,500 mm, table width: 280 mm, table length: 700 mm, overall weight: 1,000 kg, Including three-axis digital readout Guedswxpx Hepfx Ag Noh

Condition: excellent (used), Year of construction: 2025, Hermle UWF 900 Year of manufacture according to wiring diagram: 1992 Heidenhain 407 control Handwheel Electric pushbutton Network connection Speed: 4,000 rpm Technical data: X-travel: 600 mm Godpfxexf Ec Se Ag Neuh y-travel: 400 mm z-travel: 420 mm Tool holder: SK 40 Distance spindle/table: 127 - 567 mm Spindle diameter at front bearing: 55 mm Videos of the machine are available!

Condition: used, Year of construction: 2009, operating hours: 17,446 h, functionality: fully functional, Hermle C40U from toolmaking – in very good condition – Travel X/Y/Z: 850 / 700 / 500 mm Rapid traverse on all axes: 40 m/min Table size: Ø 750 × 750 mm Table load capacity: 600 kg Swivel range A-axis: +25° / -110° Main spindle Speed: 18,000 rpm Drive power: 20 kW Tool changer 40-position ATC with HSK63A interface Tool diameter: 80 mm (125 mm with free adjacent slots) Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine & equipment Control: Heidenhain iTNC 530 Gusdpfxjxdk Dlo Ag Noh Accessories: Measuring probe Blum laser tool measurement Coolant pressure 40 bar (IKZ)

Condition: excellent (used), Year of construction: 2015, Available from December 2025 Guedpfx Aowwmlueg Njh Hermle C400U Year of manufacture: 2015 Travel paths: 850 x 700 x 500 SK 40 Magazine positions: 32 Spindle speed: 16,000 rpm Control: TNC 640 Probing system: Renishaw Spindle hours: 23,900

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC milling machine HERMLE UWF 900 W year of construction 1991 Control: Heidenhain TNC 360 x-path: 600 mm y-path: 400 mm z-path: 420 mm Spindle holder ISO: SK 40 Vertical quill stroke: 75 mm Gedpexhcu Djfx Ag Nsuh Speed range: 20 ... 4000 rpm Spindle head swivels left and right: 90° left / right ° Feed rate:: X/Y/Z: 1...6000 mm/min. Feed rate:: X/Y: 7 m/min. + Z: 6 m/min. Table size: 900 x 460 mm Table load: 400 kg Total power requirement: 13 kW Machine dimensions approx. LxWxH: 4.0 x 3.8 x 2.0 m Weight approx.: 2300 kg Equipment: - Separate production cell - Coolant device - Control panel with swivel arm - SK 40 Heidenhain touch probe - handwheel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 21,007 h, Control Unit Guedpfx Aoxnd Tzjg Njh Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 450 mm Z-Axis Movement 450 mm Table Table load 300 kg Additional Equipment Through spindle cooling 80 bar: -Renishaw workpiece probec/ -Blum laser This 5-axis HERMLE C20U was manufactured in 2007, featuring a robust vertical machining center design. It boasts a spindle speed of up to 18000 rpm and a spindle power of 15 kW. The machine includes a 250mm table capable of handling loads up to 300 kg and a versatile 30-position tool changer. Ideal for piece or small batch production. Contact us for more information about this machine. Application Types Milling