Used Hermle Uwf 1000 for sale (131)

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine Klodpfx Ajwyn Rqjm Ejr - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t Kjdjt Hxbwspfx Am Eolr dimensions of the machine ca. 736 m

Condition: good (used), machine/vehicle number: 5387, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, mount diameter: 40 mm, total height: 1,900 mm, total width: 1,200 mm, total length: 1,500 mm, table width: 280 mm, table length: 700 mm, overall weight: 1,000 kg, Including three-axis digital readout Kledpswxpx Hjfx Am Esr

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, table width: 520 mm, table length: 900 mm, overall weight: 4,500 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Table size: 900 x 520 mm MACHINE DETAILS Control: Heidenhain Installation dimensions LxWxH: 3.16 x 3.62 x 2.37 m Weight: 6,000 kg Electrical data Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total rated current: 23 A Kedpjxl Sy Defx Am Eolr Total power: 16 kVA Weight: 4,500 kg

Year of construction: 1989, condition: used, control: Heidenhain TNC 355 table size: 900 x 465 mm travel: X-600 mm, Y-400 mm, Z-420 mm Kedjhd Rm Ujpfx Am Eslr tool taper: SK 40 quill stroke: 75 mm spindle speed: 20–4000 rpm feed: 1-5000 mm/min

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Path Control Super CONDITION CE Compliant!! Technical Data: >> Year of manufacture: approx. 1995 Machine No. 10064 >> Fixed angle table >> Spindle speed: 17 to 3,550 rpm >> Infinitely variable feed on 3 axes from 0 to 1,600 mm/min >> Drive power: 6 kW >> Travel X/Y/Z: 500/430/400 mm >> Vertical and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and Equipment: >> HS 401 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operation manual for the control system, and programming examples About the machine: For sale is a Hermle UWF 802M tool milling machine with HS401 path control and CE compliance. This universal milling machine is in very good condition. It features a very user-friendly path control system. Length and radius compensation can be programmed without requiring extensive CNC knowledge. Of course, the Hermle can also be operated manually without the control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple by tilting the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take the opportunity to view and test the Hermle under power on site. Kodpfeyzzb Eox Am Eolr

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Kljdpsxg Rxbjfx Am Esr

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system Kjdpfx Amsv Ed U Dj Ejlr >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Accessories and Equipment: - HS 401 contour control - Hydraulic clamping, vertical and horizontal Ksdpfx Aew Sv Iaom Eolr - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window Klodsyzyttepfx Am Ejr - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160

Condition: used, Year of construction: 2008, x-travel 1200 mm y-travel 900 mm z-travel 500 mm table surface area 1400 x 900 mm spindle taper HSK A 63 spindle taper DIN 69693 spindle turning speed - stepless 10.000 U/min feeds x/y/z -stepless 1 - 30.000 mm/min no. of tools in magazin 87 tool diameter max. 80 mm tool length - max. 300 mm weight of tools max. 8 kg table load max. 1800 kg internal coolant system feed 40 bar control HEIDENHAIN, iTNC 530 total power requirement 44 kVA weight of the machine ca. 12 t Accessories/Equipment: chip conveyor, solid clamping table, tool breakage monitoring, oil emulsion mist extraction, electronic thermal compensation (i)TNC, Kledsy Ehwuspfx Am Esr electronic hand control (i)TNC, blow-off device, Rotoclear, Blum Laser A 3

Condition: used, Year of construction: 2005, control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & pallet changer. The machine is in a well-maintained condition and can be inspected under power at any time in the Swiss factory location. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. Kodpsyy A Nusfx Am Ejlr - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2009, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 numbers of positions in the tool changer 120 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC (80 bar), NC swivel rotary table, 120-way tool changer & pallet changer. Kedpfxsyy A N Us Am Eolr The machine is in a well-maintained condition and can be inspected under power at any time in the Swiss factory location. The machine videos from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 20 | C20 | C-20 | C20U

Condition: used, Year of construction: 2003, travel -x axis 1.200 mm travel -y axis 900 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 16.000 U/min tool taper SK 40 Klodpfx Amsx E Dr Ie Ejr milling spindle dia. in forward position 70 mm table surface area 1.400 x 900 mm Milling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C1200 V | C-1200 V | C 1200-V | C1200V

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 3, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm Kedpfsy Al Ufex Am Ejlr • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Additional equipment • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE official Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2000, operating hours: 38,515 h, spindle speed (max.): 10,000 rpm, overall weight: 6,500 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 426, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm, providing versatile machining capabilities. The machine is equipped with a HSK 63 tool holder and a Heidenhain iTNC 426 CNC control for precision operations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U universal machining centre we have for sale. Contact us for further details. • Interference circle (Störkreis): 400 mm • Operation voltage: 400 V (3 phase, 50 Hz) • Control voltage: 24 V (DC) Kledpfoyz Tygjx Am Esr • Total nominal current: 63 A • Total power rating: 42 kVA • Spindle on: 38,515 hours • Axes in motion: 36,413 hours Technical Specification Taper Size HSK 63

Condition: used, Hermle H 2 milling machine with accessories Kljdpfxsugv Nws Am Eer

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr231507, 5-axis Universal Machining Centre Hermle Type: C 40 U Year of manufacture: 2003 Control: Heidenhain iTNC 530 Travel paths: Klsdpfjyzzwysx Am Ejr X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm NC Swivel Rotary Table: Diameter: Ø 800 mm Swivel range A-axis: +25° / -110° Rotary range C-axis: 360° Machine weight approx. 10.5 t Accessories: Complete documentation Coolant system Hydraulic unit NC swivel rotary table Electronic handwheel Renishaw touch probe The machine can be inspected under power by prior appointment. Technical data and specifications are subject to change and error. Sale subject to prior availability!

Condition: used, Year of construction: 2002, CNC milling machine Manufacturer: Hermle Model: C600U Year of manufacture: 2002 CNC control: Heidenhain iTNC 530 Travel (X/Y/Z): 600 x 450 x 450 mm NC swivel rotary table Kljdpfx Aeyzirfsm Eer Rotary range: C-axis 360° Spindle speed: 30,000 rpm Tool holder: HSK40 Tool changer: 30 positions Operating hours: approx. 22,000 16426

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 630 mm, CNC control Heidenhain iTNC530 NC-rotary table NC-swivel head 28-fold automatic tool changer electronical hand wheel chip conveyor coolant through spindle Technische Daten / technical details: Verfahrweg X / X-Travel 1300 mm Ksdpfjyyiw Eex Am Ejlr Verfahrweg Y / Y-Travel 720 mm Verfahrweg Z / Z-Travel 630 mm Tischgröße / table size 1000x800 mm Werkzeugschaft / spindle taper HSK63 Drehzahl / spindle speed 12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 28 Gewicht der Maschine ca. / weight ca. 8500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm Kljdpfoflrg Tsx Am Eor table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: excellent (used), Year of construction: 2003, operating hours: 49,000 h, functionality: fully functional, Basic Data Hermle Machining Center C 30 V Year of manufacture: 2003 Serial number: 16112 Technical Specifications Heidenhain iTNC 530 Spindle: 10,000 rpm SK 40 32 tool positions Klodpfx Aoyxrr Nsm Eer Linear axes, standard version Rigid clamping table Internal coolant supply 40 bar Included / Installed Standard filter Standard chip conveyor Standard coolant system Flange for extraction Purge air for scales Paper band filter for ICS (internal coolant system) Scraper-type conveyor for ICS Automatic cabin door Manual cabin roof Laminated safety glass window Electrical thermal compensation iTNC Renishaw probe incl. preparation Chip wash-down gun Key Information from the Spec Sheet Machine currently still under power Inspection possible by appointment Short-term delivery possible Not Included / Limitations Without tools Without workholding fixtures Machine accessories and documentation only as far as still available (books included) Condition of the Machine: Very good / Exceptionally high quality / Extremely clean and well maintained Single-part production in custom gearbox manufacturing The machine receives substantial annual preventive maintenance – an absolute rarity

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 Kljdswbi A Dspfx Am Esr - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: used, feed length X-axis: 430 mm, feed length Y-axis: 420 mm, feed length Z-axis: 230 mm, overall weight: 800 kg, FW 801 Conventional Milling Machine Technical data: Klsdpfx Aoy A Tlrom Esr x-travel: 430 mm y-travel: 420 mm z-travel: 230 mm Spindle taper ISO: SK40 Speed range: 40 - 2800 rpm Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Weight: approx. 800 kg Including the milling cutter shown. Inspection under power possible. Shipping available at extra cost.

Condition: ready for operation (used), Year of construction: 1996, Control Unit Brand HEIDENHAIN Kedpfx Aox D Izzom Eolr Main Drive Spindle speed range 15000 Tool taper SK40 Number of axis 3 This 3-axis Hermle C800V was manufactured in 1996. It features a SK40 spindle, capable of reaching up to 15,000 RPM, and includes tool length measuring. Ideal for precise vertical machining tasks. Contact us for more information about this machine. Application Types Milling