Used Hermle Uwf 1202 for sale (103)

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Nlsdpfxe Aa Hmxs Abuoh Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Speed : 15000 rpm Movement X/Y/Z : 800/800/550 mm Tool holder : HSK 63 In General: Year of manufacture:2024 Control system:Siemens 840 Dsl - Operate Travel ranges X/Y/Z:800/800/550 mm Rotational speed:15,000 rpm Tool holder:HSK 63 Spindle: RPM:15,000 Max. power:31 kW Max. torque:194 Nm Tool holder:HSK 63 Fluid supply:Blast air + coolant NC swivel table: A-axis:+/- 130° Drive:Tandem drive C-axis:360° Drive:Direct drive (torque motor) Clamping surface:800 x 630 mm Max. table load:1,400 kg Tool magazin: Magazine I:Standard Number of stations:42 Magazine II:ZM 88 Number of stations:88 Tool changer:Pick-Up Max. tool diameter:80 (125) mm Max. tool length:350 mm Equipment: Position Sensors:Direct scales on all axes (glass scales) Chip Removal:Chip conveyor Coolant Supply:Internal coolant system, 80 bar Workpiece measurement:Touch probe Tool measurement:Laser Kinematics measurement:Automatic, Kinematics Opt Emulsion mist separator:Mechanical Machine accuracy I:Package I Increased accuracy in A and C axes:Yes Turning function:Interpolation turning S840

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Nlsdpfxszw Rl Aj Abush Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Nljdpfx Abo Adl Rkeush Chip conveyor Heidenhain measuring probe Blum laser system

Condition: used, Year of construction: 1998, We are offering this used Hermle U 630 S vertical machining center, manufactured in 1998, for sale. Unfortunately, due to space constraints, we need to have the machine removed in week 44. The machine can be loaded for transport this week. Nodpfx Aez Tkc Ejbuelh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Speed range: 240–2,240 min⁻¹ MILLING TABLE Table dimensions: 730 × 200 mm Number of table slots: 3 MACHINE DETAILS MACHINE Machine type: Horizontal milling machine Manufacturer: Hermle Model: FW710 DIMENSIONS AND WEIGHT Nledpfxe Aduqmo Abuoh Length: 1,500 mm Width: 1,200 mm Height: 1,600 mm Weight: 400 kg EQUIPMENT 3-axis digital display, Heidenhain

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, CNC universal milling machine HERMLE U 630 T With Heidenhain TNC 426 path control system Year of manufacture: 1998 Travel distances: X 630 (875) Y 500 Z 500 Spindle speed range: 20 – 7,000 rpm, stepless Including the following accessories: Fixed swivel table, 900 mm x 528 mm clamping surface Vertical tool changer with 16 magazine positions Full enclosure with sliding doors and interior lighting Electronic handwheel 3D measuring probe Heidenhain Coolant system 4 adjustable machine feet Nods Aa Aktepfx Abuelh Operating manuals

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Nlsdpfx Abs Aduiceuoh Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Spindle speed: 100–1,300 min⁻¹ WORK TABLE Table dimensions: 520 × 170 mm Table slots: 3 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 900 mm Width: 900 mm Height: 1,400 mm Weight: 500 kg

Condition: excellent (used), Year of construction: 2019, X-axis: 850 mm Y-axis: 700 mm Nledpfx Absz E U Eajujh Z-axis: 500 mm A-axis: +31 to -139 degrees C-axis: 360 degrees Rotary table diameter: 650 x 540 mm Tool interface: HSK-A63 Tool changer: 88 positions Spindle speed: 18,000 rpm Control system: Heidenhain TNC 640 Including: coolant through spindle at 40 bar Including: air blow-through through the spindle center Including: Heidenhain measuring probe Including: BLUM LC 50 Type 200 tool measurement / tool breakage detection Including: BLUM LC 50 DIALOG technology Including: Rotoclear Including: Documentation Operating hours: approx. 8,600 The machine is in very good condition and is still in daily use. Available in approximately 3 weeks.

Condition: used, machine/vehicle number: 2880, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal tool milling machine Machine weight: approx. 0.6 t Travel distances X-axis travel: 290 mm Y-axis travel: 120 mm Z-axis travel: 350 mm Work table Table clamping surface: 690 × 175 mm Spindle Spindle mount: SK 40 Speed stages: 17 Speed range: 50–2,240 rpm Spindle drive: dual-pole, switchable with clockwise/counterclockwise rotation Feed Feed range: 42–680 mm/min Nljdps Aaz N Isfx Abueh Feed stages: 14 Electric feed: X-axis Rapid traverse: X-axis via handwheel Milling head and horizontal milling Vertical head: rotatable ±90° Horizontal milling: possible via cross slide Operation and safety Handwheels: Vernier handwheels for all 3 axes Cam switch: 3-way in the X-direction for program sequence Emergency stop: present Main switch: present EQUIPMENT Rotatable vertical head ±90° Vernier handwheels for all 3 axes Rapid traverse via handwheel in the X-direction Electric feed in the X-direction Feed stages adjustable via change gears Cross slide for horizontal milling 3-way cam switch in the X-direction for program sequence Safety emergency stop Main switch

Condition: good (used), Year of construction: 2004, operating hours: 35,251 h, functionality: fully functional, overall weight: 8,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 11,082 h, number of slots in tool magazine: 28, Equipment: chip conveyor, documentation/manual, This HERMLE U1130 universal machining center was manufactured in Germany in 2004 and has been in operation for 35,577 hours, of which only 8,087 are spindle hours. Equipped with a Heidenhain TNC 520 control, this machine features the integration of 5 axes and an NC rotary table. It offers excellent operating conditions. Additional information: Machine advantages: Qualitative machine advantages: Very good condition Spindle operating hours: 11,082 Technical machine advantages: Nsdpfsz Inknex Abuslh Internal cooling at 40 bar Integrated NC rotary table Blum laser measurement system Without the vises shown in the pictures.

Condition: excellent (used), Year of construction: 2003, operating hours: 23,273 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 1,400 mm, workpiece width (max.): 900 mm, workpiece height (max.): 240 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 13,200 kg, spindle motor power: 32 W, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Nodpfx Aboz S Uddouslh Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Max. Tool Length mm: 300 Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Condition: good (used), Year of construction: 2002, X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Tool holder: SK 40 Control system: Heidenhain TNC 530i Spindle speed: 8,000 rpm Nsdpfxsz Sthnj Abuolh Table surface: 1000 x 560 mm Equipment: Includes chip conveyor.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 42, number of axes: 5, This 5-axis HERMLE C42 U universal machining centre was manufactured in 2011. It features a travel of 800 x 800 x 550 mm and a spindle speed of 18,000 rpm. The machine includes a NC swiveling rotary table and a tool magazine with 42 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C42 U machine we have for sale. Contact us for further details. - Table / Rotary System: NC swiveling rotary table PW 800 with torque drive in C-axis and helical tandem drive in A-axis- Pallet Changing System: Included- Pallets Included: 3x Palette 630/STM320 Sternnut- Automatic Cabinet Doors: Included- Hydraulic & Pneumatic Expansion: Included- High Pressure Coolant (IKZ): Internal coolant supply 80 bar- Chip Conveyor: Scraper belt conveyor / Standard chip conveyor- Filtration: Paper band filter- Coolant System: Vario pressure limiting valve, standard coolant unit, sealing air for scales, bed flushing- Air Blow Devices: Air blow device, air blast through spindle center- Chip Flushing Gun: Included- Mist Extraction: Oil mist extraction- Enclosure Top: Automatic mechanical cabinet roof- Safety Glass: Laminated safety glass window- Compensation: Electrical thermal compensation iTNC- Handheld Control: Electrical hand control module iTNC- Measuring Probes: Heidenhain measuring probe incl. preparation, BLUM tool breakage/measurement A2- Tele-Service: Remote maintenance- Supply Voltage: 400 V / 3~- Mains Frequency: 50 Hz- Control Voltage: 24 V-- Nominal Current: 60 A- Power Consumption / Load: 37 kVA Technical Specification Nlsdpsz Nf N Ejfx Abujh Taper Size HSK 63

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment. Nsdpfx Abexgukbouslh

Condition: excellent (used), Year of construction: 2004, 5-axis machine from Hermle - Hermle U740 - Year of manufacture: 2004 Control system: - Heidenhain iTNC 530 - Electronic handwheel - 3D measuring probe Renishaw OMP 40-2 Main spindle: - Tool holder SK 40 - Speed range max. 12,000 rpm - B-axis with hydraulic clamping -5° / +95° Tool changer: - 12 magazine positions Working area: - X- 915mm - Y- 500mm - Z- 500mm Table design: - NC rotary table - Table load max. 500 kg Coolant: - Internal cooling 40 bar - Chip conveyor Machine hours: - Machine: 30,622 - Spindle: 8,844 Delivery time: - Immediate Video available. Special features: - Machine is ready for immediate use. Nledpfsz Nih Eox Abueh - Machine is available for immediate delivery. - Machine can be inspected and tested on-site while powered. - Machine will be loaded onto a truck free of charge. - Forklift for loading is available. - Transport can be arranged upon request.

Condition: good (used), Year of construction: 2015, C 22 U + IH 30 handling system + ZM 192 additional magazine Machine parameters: Travel in X, Y, Z axes: 450, 600, 330 mm Max. spindle speed: 18000 HSK-A63 rpm Description: The machine is in good technical condition, test operation is possible by prior arrangement. Equipped with Hardware KinematicOpt, centre cooling 80 bar, BLUM LC 50 TL200, Renishaw TNC 640. Original price was approx. €570,000. Comprehensive specification of supplied components and options available – will be provided upon request. Nsdpey Rgfzjfx Abuelh

Condition: used, Year of construction: 1997, Hermle U 630 T 3-axis universal CNC milling machine Hermle 3-axis universal CNC milling machine Type/Model: U 630 T Condition: Used Year of manufacture: 1997 Technical data: Tool holder: SK 40 Tool changer: 16-position Nledez Szarspfx Abueh Travel ranges X/Y/Z: 630 mm x 500 mm x 500 mm Spindle speed range: max. 7000 rpm Quill stroke: 75 mm Work table Clamping area: 900 x 528 mm Max. load: 400 kg Total connected load: 14 kW Control system: Heidenhain TNC 430 Dimensions L/W/H approx.: 2.30 m x 2.10 m x 2.10 m Weight approx.: 4,800 kg

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: Nodpfx Aboz E Rb Dsuslh - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2013, Travel: X-800 mm, Y-600 mm, Z-500 mm Control: Heidenhain iTNC530 Nedpfeyxh Hpex Abuelh Spindle speed: 15.000 U/min tool magazine: 30 seats probe: Heidenhain electric handwheel: Heidenhain table size: 1000 mm x 560 mm Spänewanne: .

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Nodpszaf Huofx Abuolh #Tags: C30U | C-30U | C-30 U

Year of construction: 2000, condition: used, X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible. Nlsdezvv I Tspfx Abuoh

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, overall weight: 4,500 kg, CNC control Heidenhain TNC 426 electronical hand wheel manual swivel head quill coolant device measuring feeler Technische Daten: /technical details Nodpfx Ajzr D Akobuolh X Weg / x travel 875 mm Y Weg / y travel 500 mm Z Weg / z travel 500 mm Drehzahlbereich 2-stufig / spindle speed range (2-steps) 20 - 7000 UpM / rpm Eilgang / rapid feed 15 m/min. Spindelaufnahme / spindle taper SK 40 Tischaufspannfläche / table clamping area 900x528 mm Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2001, Description: Nodpfjz Imtbjx Abuslh The machine is in good technical condition and can be tested upon prior arrangement. The machine is fully functional and is equipped with a new roofing. It does not include a probe, clamping devices, or tools.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, overall weight: 7,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 3, This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details. - Power (40% / 100% Duty Cycle): 15 kW / 10 kW- Rapid Traverse (X, Y, Z): 35 m/min- Coolant System: 300 L – 40 L/min at 3 bar- Operation Voltage: 400 V / 3~ 50 Hz- Control Voltage: 24 V-- Total Nominal Current: 44 A- Total Rating: 31 kVA- Electrical Drawing No.: 300.91 K 40.1- Control Unit Operating Hours: 57,705 hrs- Machine Operating Hours: 48,735 hrs- Program Run Time: 19,077 hrs- Spindle Operating Hours: 18,005 hrs- Drive On: 30,073 hrs- Axes in Motion: 17,617 hrs- Included Equipment / Accessories:- Heidenhain TS 642 touch probe system (retrofitted in 2023)- 3 Allmatic vises- Approx. 300 tool holders- 3 jaw chucks- Miscellaneous small parts- Complete machine documentation and service reports- Service History:- 2019: New main spindle fitted- 2023: Retrofitted with Heidenhain TS 642 touch probe system Technical Specification Taper Size SK 40 Nlodpfx Abez D Tdxsuoh

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m Nsdoinh Rqjpfx Abujlh other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis