Used Hob Sharpening Machine for sale (64,046)

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Lrjdpex Ezyvefx Ahzog Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: excellent (used), new engine, finish diameters 40-140 Lrjdpsq R Sutofx Ahzog

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Lredpjw T S Sqofx Ahzjg Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 20780, Fanuc Oi-MB - spindle HSK50 - 50-10'000 min-1 5 axes XYZAC Manufacturing origin CH Voltage 3x400V/50Hz Netweight 8’000 kg Dimensions 1170x2270x2260 mm TECHNICAL DATA (standard) Control GE Fanuc 160 i-MB Axes 5, simultaneously controllable MEASURING SYSTEMS X-, Y- and Z-axes resolution 3 µm A-axis 0,0001° C-axis 0,0001° GRINDING HEAD, GRINDING SPINDLE Power 15 kW Spindle speed 50 – 10'000 min-1 Spindle attachment HSK 50 Max wheel diameter up to 250 mm Max wheel number 6 LINEAR-AXES X-axis, travel 380 mm. Max speed 20'000 mm/min. Resolution 0,0001 mm Gear ratio 1 : 1 Drive power 1.0 kW, 3 Nm Y-axis, travel 300 mm. Max speed 5'000 mm/min. Resolution 0,0001 mm Gear ratio 24 : 4 Drive power 1.0 kW, 8 Nm Z-axis, travel 280 mm. Max speed 20'000 min-1 Resolution 0,0001 mm Gear ratio 1 : 1 Drive power 1.0 kW, 3 Nm SWIVEL-AXES C-axis, angle 210° Max speed 72°/sec. Resolution 0,0001° Drive power 1.0 kW, 8 Nm C-axis’, angle +/- 180° Max speed 90°/sec. Drive power hydraulic A-axis DMR 100 Rotation infinite Max speed 225°/sec. / 3600°/sec. Resolution 0,0001° / 0,0001° Power 1.0 kW / 5.8 kW Taper ISO 50 Center height 210 mm TABLE narrow piece / large piece / total Length 500 mm / 500 mm / 1000 mm Width 145 mm / 330 mm ELECTRIC CONNECTED LOAD 9 kW / 15 kW Power rating 27 kVA / 36 kVA Tension 3x400 V AC Frequency 50 Hz Main fuse 63 AT Lsdofbt R Eopfx Ahzjrg errors and omissions excepted-data given without obligation

Condition: excellent (used), Mikron Gear Hobbing Machine A33/0 – for Module 0.5 to 2.5 – rarely used Manufacturer: Mikron Model: A33/0 – Gear Hobbing Machine (vertical) Version: Base machine with standard milling head Condition: used, very good condition, machine has been rarely operated Color: green Technical Data Max. workpiece diameter: approx. 80 mm Max. hobbing length: approx. 150 mm Module range: approx. 0.5 – 2.5 Ideal for small gears in the module range 0.5 – 1.0 Main drive: 3 kW Electrical connection: 3 x 380 V AC, 50 Hz Total power consumption: approx. 9.5 kVA Dimensions & Weight L x W x H: approx. 1,450 x 1,380 x 2,080 mm Weight: approx. 2,200 kg Special Features Very well-suited for manufacturing small gears (module 0.5 – 1.0) Ljdpfx Asx A D Izjhzsrg Machine was rarely used in production, therefore minimal wear Availability / Service Detailed photos and operating video available upon request Quotation including price, delivery terms, and lead time possible Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5342, We are offering this very well-maintained Fortuna CS6 skiving machine, year of manufacture 2020. Manufacturer: Fortuna Model: CS6 Skiving Machine Year of Manufacture: 2020 Lodox S Edfopfx Ahzerg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. OptiControl PowerCom offers you: measuring instruments recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Lodpfx Aheycurrezorg Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: new, Year of construction: 2019, Produced diameters: 40-140 Engine 5kW End-of-shift product 30m3 per shift Lrodpfx Ahed Rh Dxjzsg

Condition: new, Year of construction: 2025, operating hours: 2 h, functionality: fully functional, rotational speed (max.): 2,700 rpm, power: 0.55 kW (0.75 HP), warranty duration: 12 months, Original ISELI Sharpening Machine for Chisels and Hand Tools – For Sale For sale is an original ISELI sharpening machine, specifically designed for precise, clean, and repeatable sharpening of chisels and a wide range of hand tools. This machine is ideally suited for carpentry workshops, professional trades, and quality-focused hobbyists who demand accurate results and long-term reliability. ISELI machines are renowned for Swiss precision and craftsmanship – Made in Switzerland. Thanks to its robust construction, compact design, and user-friendly operation, this sharpening machine is built for daily use over many years. Lodpfx Aerm Sy Eohzorg Details: • Manufacturer: ISELI Maschinenfabrik AG, Switzerland • Condition: Very good (showroom machine) • Application: Chisels and various hand tools • Highlights: Solid construction, precise sharpening results, durable Swiss quality Pickup / Shipping: Pickup in 6247 Schötz (Switzerland) or shipping available by arrangement. Please feel free to contact us for further information or inquiries.

Condition: new, Year of construction: 2026, functionality: fully functional, BAS 100 (STA) – Upsetting machine for band and gang saws, automatically hydraulically controlled Upsetting the saw teeth, in addition to setting, is another method to ensure free cutting of the saw during machining. During the upsetting process, an upsetting pin is positioned in front of the saw tooth, while the tooth is held against an anvil. By rotating the eccentric upsetting pin, the saw blade material is displaced toward the tip of the tooth. Once the upsetting process is completed, the upsetting pin automatically returns to its original position. Ledpfxsv Tqzyo Ahzerg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, Automatic Grinding Machine for Band Saws – ISELI BAP110 The ISELI BAP110 is a state-of-the-art, fully automatic grinding machine for band saw blades, engineered to meet the highest standards in precision, efficiency, and operator convenience. Thanks to its automated grinding process, the BAP110 ensures consistent, high-quality processing of saw teeth with minimal manpower required. Lrodpfx Ahov Tltdszsg 🔹 Fully automatic operation 🔹 Precisely adjustable tooth shape and pitch 🔹 Flexible use for various band saw blades 🔹 Intuitive controls with a user-friendly interface This machine is particularly suitable for sawmills and grinding workshops that value consistently high cutting quality and optimized throughput times.

Condition: good (used), Code: 0401 Brand: PERFECTA Model: 550/S Lredpfouq Hhtjx Ahzog Sharpening machine for saw bands Technical data: With base Grinding wheel diameter mm 140 Motor Hp 0,5 three-phase Setting unit Overall dimensions mm 600 x 550 x 1400 h Weight kg 120

Condition: used, Bandsaw Blade Sharpening Machine Vollmer CAB 42 U - Bandsaws: - Blade width: 60 to 210 mm - Blade length: 6000 to 11000 mm - Tooth pitch: 6 to 60 mm - Tooth height: 4 to 25 mm - Rake angle: -5 to +35° - Working speed: 30 and 45 teeth/min - with central height adjustment - Feed from right to left - with clamping device for bandsaw blades Ljdexxn Taspfx Ahzerg

Condition: used, functionality: fully functional, wheel width: 800 mm, module 1-6 diameter max 600 mm Lrodpfxoxhck Ss Ahzsg digital readout Complete machine with documentation, tool holders, change gears, etc.

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Lodpfx Ahoxupg Tozjrg See document

Condition: excellent (used), Working range 850 mm 0.12 kW motor Very good condition. Ledor Ha Ufopfx Ahzerg

Condition: excellent (used), Working travel of the slide 660 mm Travel of the cross slide 160 mm Vertical travel of the grinding head 240 cm Very good condition. Lredemv Ea Ejpfx Ahzog

Condition: excellent (used), WORKING LENGTH- 80 CM Ljdpfjttu Tzex Ahzerg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, CNC Gear Hobbing Machine Horizontal . no tailstock, just for chuck parts . max. gear diameter: 90 mm . max gear width (b): 50 mm . max module: 3 Lredpfx Aeqaf U Tshzeg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 27506, Complete overhaul in 2009 CNC gear hobbing machine Pfauter PE 150 Serial number: 27 506 Year of manufacture: 1991 – complete overhaul in 2009 CNC control: SINUMERIK 840 D Ljdpfx Ajxtpg Rehzorg

Condition: good (used), Year of construction: 2016, operating hours: 3,000 h, Dinaco grinding machine, for sharpening band saw blades. The machine is refurbished, features automatic grinding wheel alignment, water cooling, and allows for grinding of vario tooth shapes. Lrjdpfox Tguhox Ahzsg

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. wheel diameter: 900 mm Lrodpfx Ahexvr Enozeg Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm MACHINE DETAILS Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Year of construction: 2002, condition: good (used), Vollmer CA 200 Ledefbgvdjpfx Ahzerg

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm Lrodpfxoglui Ao Ahzog tooth pitch 20 - 50mm

Year of construction: 1982, condition: used, Circular saw blade sharpening machine Lrsdpfecq Nghox Ahzsg Loroch JLM 36