VOLLMER sharpening machine for HM circular saws
Type Finimat Beta
Bwr9e80w3p
sharpens circular saw blades up to 800 mm Ø in straight or alternating bevel grinding,
Pku0j
Circular saw sharpening machine VOLLMER CNE
fully functional - good condition - immediately available
Location: Germany, near Regensburg
Please visit also my other advertisements.
Pffdz
I am looking forward to your inquiry.
sharpens circular saws up to 800 mm Ø or gang saw blades in straight grinding, quick adjustment for 3 speeds, with grinding dust exhaust, if required with gang saw clamping device and indexing rail, completely disassembled, workshop overhauled and rewired
Bhyqv9est8
Kreissaegeblattschaerfmaschine
Loroch JLM 36
Xgnsnna7g
circular saw blade sharpening machine make WERKÖ type SWSK 1250
make # 230/75 GR 89, year of construction 1977
for sharpening medium to coarse metal saw blades
Technical data:
Saw blade diameter cold circular saws 250 - 1250 mm
Hot circular saws 900 - 1700 mm
tooth pitch up to 42 mm
Bkkqdrquww
Double height of grinding wheel 25, 37, 50, 75 and 100
per minute, where 25 and
37 primarily for the purchase of shares
straightening the machine serves
Grinding wheel revolutions 2000 an...
STEHLE sharpening machine for HM circular saws, type HS 600
30b89jq7
for cutting or circular saw Ø: 90 - 600 mm
Xsraw
Tape u. Hacksaw blade width up to: 55 mm
Tooth pitch: 3 - 35 mm
Tooth height: 1 - 17 mm
Sharpening disc Ø max .: 190 mm
Grinding wheel Ø max .: 180 mm
Grinding wheel speed: 2780 rpm
Drive motor: 380 V, 0.3 kW
Required space: 670 x 600 x 1000 mm
Weight: 70 kg
Machine tested and fully functional. To operate as needed with 230 V.
Bdbihcg98b
HM circular saw sharpening machine
Brand: Vollmer
Btshmrvdag
Type: Uniläpp II 450
Year of manufacture: 1979
Circular saw sharpening machine, dry, for set blades, detailed description can be found under the category pictures
Bhcmapvrgb
circular saw blade sharpening machine make WERKÖ type SWSK 315
Masch.# 134/73, year of construction 1973
Technical data:
min/ max circular saw blade diameter 16 - 315 mm
tooth pitches up to 16 mm
Stroke rate of the grinding slide 90 - 135 - 200 H/min
grinding wheel diameter 160 mm
Infeed per saw blade revolution 0.05 / 0.10 / 0.15 / 0.20 mm
Blade geometry for tool type N1 8/18°
Blade geometry for tool type H1 5/12°
Blade geometry for tool type W1 10/25°
Power supply 380 V / 50 Hz
Connected load ...
VOLLMER sharpening machine for HM circular saws
Type Finimat Beta
with hollow face grinding device
Ctvt0jmi
HM circular saw sharpening machine
Brand: Vollmer
Blcwlia
Type: Uniläpp 600
Year of manufacture: 1989
HSS circular saw sharpening machine
Bd3mynoa3m
Brand: Ohler
Type: SA 1250
Year of manufacture: 1979
for saws up to 1250mm.
sharpens circular saw blades up to 800 mm Ø in straight or alternate bevel grinding, 3 working speeds, grinding dust exhaust, new electric cables, completely disassembled and fully reconditioned
Zh9faend
Automatic wet sharpening machine for circular and band saw blades.
Frequency controlled speed of the sharpening wheel and feed.
Grinding wheels diameter 300 mm.
Bu92ed2pki
Clamping device for circular and band saws.
Accessories like tooth form cams and grinding head.
for circular saws until 1.100 mm Ø and until 6 mm thickness or band-saw blades until 250 mm width, grinding wheel 250 mm Ø, max. tool pitch 90 mm, 3 feeding speeds 30, 50, 75 teeth pm, 4 tooth shapes (standard back, hook like back, rounded back tooth, roof tooth), saw dust exhaust, 1 cone adapter, weight 450 kg, if necessary indexing device for circular saws or band-saw supports, completely disassembled, machine reconditioned and new bearings
Bkanhvvtlk
Very well maintained automatic sharpening machine for circular saws and band saws.
Saw blade diameter from 200 - 1500 mm. With straight and bevel grinding.
Tooth pitch up to 70 mm. Grinding wheel diameter 250 mm.
Tooth height up to 45 mm. Feed speed 30 and 70 Z / min.
Oswst
3 switchable tooth forms.
Ball bearing mounted grinding head / backlash free. Extraction. With clamping device for circular saws, on request also dividing disc device. Machine overhauled in 2004.
for circular saws until 1.100 mm Ø and until 6 mm thickness or band-saw blades until 250 mm width, grinding wheel 250 mm Ø, max. tool pitch 90 mm possible, 3 feeding speeds 30, 50, 75 teeth pm, 4 tooth shapes (standard back, hook like back, rounded back tooth, roof like back), saw dust exhaust, 1 cone adapter, weight 450 kg, if necessary indexing device for circular saws or band-saw supports, machine completely disassembled, reconditioned and new bearings
Nzlgh
sharpens circular saw blades up to 800 mm Ø in straight or alternate bevel grinding, 3 working speeds, 2 tooth shapes (pointed and hooked tooth), grinding dust exhaust, 2 motor protection switches, completely disassembled and fully reconditioned
Cw73f7iw
saw table
Sczehdkc
Panhan's 604Max saw blade 400mmMaz cutting height 110mm5.5kW main motor380V
sharpening machine with automatic control, max. tooth pitch 40 mm, infinitely variable feed gear, 4 tooth shapes, including saw dust exhaust, including indexing rail pitch 22 mm, 25 mm or 30 mm available, everything completely disassembled, cleaned and new ball bearings
Bkvrxzhmvj
SCHMIDT saw blade sharpening machine, type ASG 500 A
Hbcdzp
saw blade diameter 70 - 230 mm
sawblade width 12 mm
hole of sawblade 10 - 50 mm
grinding wheel diameter 120 mm
grinding wheel width 6 mm
grinding wheel hole diameter 32 mm
no. of teeth 30 - 400
Ccctaorx
total power requirement 0,33 kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 0,80 x 0,70 x 1,70 m
Good morning!
Bxfqttp3hf
I would like to offer you the following machine:
1 used saw sharpening machine
- 2,2 KW 380 Volt
- Price: 300,-- € + 19 % VAT
The machine is used.
Cash payment or bank transfer before collection. Loading by forklift truck
is no problem. The machine is sold without any warranty and guarantee.
Please give me a short message. Thanks!
Kaltenbach circular saw machine offered.
Type: KKS
Diameter bed: 540 mm
Machine height: 190 cm
Jw78se
2 Units on stock!
For more information call us or send an e-mail.
Sliding table saw
Bkzren9
SCM SI - 1545 degrees
5.5kW
Saw blade max 400mm
Max cutting height 140mm
Max cutting height at 45 degrees 96mm
sharpening machine with automatic control, max. tooth pitch 40 mm, 3 feeding Speeds: 30, 50, 75 teeth per Minute, 4 tooth shapes, including saw dust exhaust, including indexing rail pitch 22 mm, 25 mm or 30 mm available, 3 motor protection switch, completely disassembled, cleaned, wear parts renewed and new ball bearings.
Bicjy7naw
saw blade diameter 80 - 700 mm
Blnrbublh8
workpiece-spindlehead motor 0,25 kW
grinding wheel diameter 125 mm
turning speeds 2850 U/min
grinding range -20 bis +20 Grad
weight of the machine ca. 12 Kg
dimensions of the machine ca. 700 x 400 x 300 m
saw blade diameter 15 - 200 mm
chip pocket 0,7 - 15 mm
no. of teeth 14 - 360
grinding wheel diameter 125 mm
grinding wheel width 0,3 - 7,5 mm
grinding wheel hole diameter 20 mm
grinding spindle speed 3920 U/min
stroke - stepless adjustable 80 - 180 Hub/min.
total power requirement 0,4 kW
weight of the machine ca. 200 kg
dimensions of the machine ca. 0,90 x 0,70 x 1,40 m
Ccc3rufy
Saw blade diameter: min. 15 mm.
Saw blade diameter: max. 200 mm.
Grindable tooth settings: 0.7 - 15 mm.
Grindable number of teeth: 30 - 256.
Incl. various change gears and documentation.
Weight: approx. 400 kg,. Old but good.
The machine can be inspected under power by arrangement and is available immediately. From stock free loaded.
Please also note my other advertisements.
Ddls3w7
grinding wheel dia. x width: 200x2-10 mm
grinding wheel hole diameter: 32
S8wqk7gmj
grinding spindle - swivable: 20 °
rpm spindle (continous): 4850 U/min
work speed: 40 - 200 stufenlos 1/min-1
adjustment of stroke: automatic/automatico mm
grinding range external saw blade min.: 20 mm
grinding range external saw blade max.: 400 mm
grinding depth: 0 - 3,5 stufenlos mm
work height max.: 1200 mm
total power requirement: 0,75 kW
weight of the machine ca.: 0,62 t
transport dimensions LxWxH: 1,1x0,9x1,...
Automatic miter saw- Bewo 250mm
Salleg77
- Max saw diameter 85mm
- Length supply conveyor 6100mm
for band saw blades up to 120 mm blade width, curved tooth form, max. tooth tip distance (pitch) 50 mm, with grinding dust exhaust, 2 large saw blade guide rollers with height and lateral adjustment
Btwjog7
Vollmer circular saw setting machine type PH402, M.-No. 602
for circular saws 150 - 1000 mm Ø and more
blade thickness 2 - 4,5 or 3-5 mm
P8s2zv
tooth pitch from 10 mm
incl. group toothing
TOP-condition almost new not used
sawing machine for non-ferrous metals
transmission range up to Ø60 mm respectively 70 x 70 mm
cut-off length up to 250 mm
engine power: 3 kW
rotation speed: 180 - 4800 rpm
Ysiuaw
sawing blade up to 250 mm
pneumatic voltage
flow cooler
control system renewed: 2011
ESTA oilmistseperator type AS 600, year of construction: 2006
Table
machine number 12122
Saw blade sharpening machine with ratchet feed
for grinding circular saw blades up to 350 mm diameter.
Bn0xr8tynt
grinding wheel diameter: 240 mm
saw blade diameter: 600 mm
total power requirement: 1,1 + (0,37 kW) kW
S8ymrkw0t
weight of the machine approx.: 600 kg
Saw Blade Sharpening Machine
Machine performs grinding process automatically
saw blade continue to move automatically
grinding wheel diameter: max.: 240 mm
driving motor for feed (0,37 KW)
machine functional!
Manufacturer: CW Kreher Olbernhau
Bhr98vujhs
Year of construction: unknown (1985)
Engines: Bolted circle saws 2.2 kW (from above)
Drill 3 kW (from below)
Hole diameter: approx. 60 to 300 mm
Max. material thickness: 80 mm
Drill diameter: max. 100 mm
Drill depth: max. 100 mm
Rotational speed: 4 steps, adjustment via V-belt
Use: cutting out blanks for bowls, plates or similar round turned parts for turning.
Sawing from above up to a maximum diameter of approx. 300 mm,
drilling from below up to...
saw blade diameter 15 - 200 mm
chip pocket 0,7 - 15 mm
no. of teeth 14 - 360
grinding wheel diameter 125 mm
grinding wheel width 0,3 - 7,5 mm
grinding wheel hole diameter 20 mm
grinding spindle speed 3920 U/min
stroke - stepless adjustable 80 - 180 Hub/min.
total power requirement 0,4 kW
Leadjibr
weight of the machine ca. 200 kg
dimensions of the machine ca. 0,90 x 0,70 x 1,40 m
Incl. accessories
Bwyzlux9qv
Delivery as shown.
Saw blade diameter up to 400 mm
Connection voltage 380 V, 50 Hz
Year of construction: 1984
Machine no .: 115/84
HM circular saw soldering machine
Brand: Gerling
Type: GLL 750
Year of manufacture: 2009
Condition: Good.
Bwsxvcai0w
machine number 12220
Saw blade sharpening machine with ratchet feed
for grinding circular saw blades up to 350 mm diameter.
Bozqufsrs8
grinding wheel diameter: mm
saw blade diameter: mm
Bl7abym0
total power requirement: 1,65 kW
weight of the machine approx.: 620 kg
Saw Blade Sharpening Machine
Machine not complete - grinding spindle motor missing!
for sale as spare part dispenser!
The exact equipment of the machine can be seen in the pictures (picture 2 - 4).
Attention - the first picture with the whole machine is only a sample picture. We can't really get to the machine at the moment to take pictures.
The machine was purchased from us in 2017.
Bw0o3v8ruj
A sawing line with 6 meters of supply warehouse and an output unit with sorting table, this machine can be converted for sawing aluminum profiles or bar material.
A machine in this condition with so few hours of operation is rare.
Pvmpmq
Delivery as shown.
Gqswusx3
Saw blade diameter 250 to 1450 mm
Connection voltage 380 V, 50 Hz
Connected load: 2.1 kW
Weight: 1000 kg
Year of construction: 1978
Machine no .: 15/78
