Used Homag Baz 324 for sale (477)

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Kdjdpfjy In A Aox Acpeu

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Kjdpfx Aozrd Rzjcpsdu Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Numerical Control Type Power Control PC85T Kdsdpszrd Sfofx Acpou Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: good (used), Year of construction: 2003, functionality: fully functional, Good condition, see photo. For Homag KL series edge banding machine. Kdodpfxoy N Ulao Acpou

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PC 85 (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet - Total installed power (Kw) 20 (ca.) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) In-feeding working table (panel support) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 100 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Kjdpfeziapbox Acpsdu

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, We are offering this ready-to-use HOMAG KR 79/02/PU/S2 edge banding machine, manufactured in 1993. Kodpfx Aszwunbjcpsdu Manufacturer: HOMAG Type/Model: KR 79/02/PU/S2 Year of manufacture: 1993 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Kdodpfx Acjzr N E Dopsu Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: reconditioned (used), Year of construction: 2015, machine/vehicle number: 0-250-10-2402, functionality: fully functional, operating hours: 50,000 h, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Refurbished machining center. No.: 0-250-10-2402 TECHNICAL DATA: PERMANENTLY INTEGRATED FUNCTIONS: ▪️ V21/32 MM HIGHSPEED 7500 drilling head ▪️ Unit for making keyway grooves ▪️ H6X drilling unit ▪️ H4Y drilling unit ▪️ Tool changing spindle 10/12 KW HSK 63 (S1/S6-50%) ▪️ Drilling unit and milling unit on separate Z axes ▪️ Flange with unit connection ▪️ Tool magazine at the rear with 8 positions ▪️ Two-position magazine for unit feeding MACHINE OPERATION ▪️ WOODWOP for the machine ▪️ WOODWOP DXF IMPORT BASIC ▪️ 3D simulation for the CNC machine ▪️ Laser positioning for beams and suction cups DIMENSIONS OF WORKPIECES ▪️ Length of workpiece X, single processing – length M: 3250 ▪️ Width of workpiece Y, single processing – width M: 1400 Kdodpfx Ajzu Nq Secpeu DOCUMENTATION ▪️ Selected languages: English ▪️ Format: Data storage medium + paper documentation GENERAL INFORMATION ▪️ Control system: POWERCONTROL control with POWERTOUCH system ▪️ CE marking: YES ▪️ Operating status: Ready for operation ▪️ Year of manufacture: 2015

Condition: reconditioned (used), functionality: fully functional, Universal Trimming Unit UF11, with frequency inverter Used & reconditioned unit, without warranty For grooving or rebating in edgebanding machines or double end tenoners Specification: - motor can be swiveled steplessly or in rasters from +90 to -90 degrees (each vertical position of motor shaft) - motor 4 kW, 3Ph 400 V, 300 Hz - motor shaft diameter 30 mm - with electro-pneumatic jumping function - inclusive of suitable KEB frequency inverter (used & tested) Upon request the unit can be upgraded to motorised (NC-controlled) adjustments in x- or y-axis. Please ask for our quote. Installation and set-up of the unit at your machine is also possible. Ksdpeztl Rxsfx Acpodu Availability 1 - 2 weeks after receipt of order.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Overall height: 2,200 mm Overall length: 7,500 mm Overall width: 1,500 mm MACHINE DETAILS Weight: 4,000 kg Year of manufacture: 2007 Voltage: 400 V Power consumption: 46 A Fuse: 63 A Ksdpfx Acoy Akytopjdu Transport dimensions: 7,500 mm x 1,500 mm x 2,200 mm (L x W x H) Transport weight: 4,000 kg EQUIPMENT Tools included: Yes (for 1st, 3rd, 4th, 5th, 7th, and 8th unit) Tools included: No (for 6th unit)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking Kodpfx Aoyw Ndmjcpjdu - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: O06027A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 250/D/25/12 O06027B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525 / 6 / A3/ 15 O06027C) L shaped connecting roller conveyor "HOMAG" Mod. TWL 310 / 25 / 12 O06027D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526 / 9 / A3 / 25 O06027E) Connecting Roller Conveyor "HOMAG" Mod. TBL 100 / 25 / 25 O06027F) Connection transfer (on rails) "HOMAG" Mod. TWL 120 / 30 / 02 S Kdsdpfx Aowxvdcocpou O06027G) Connection transfer (on rails) "HOMAG" Mod. TWL 120 / 34 / 02 S O06027H) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Kedex Ey H Iopfx Acpedu

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw with Cut-Rite software optimization - Year of manufacture: 2002 - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm - Cutting height: 85 mm - Main blade 400 mm - Main motor 11.2 kW (15 HP) Kdsdpfox Ey Nvox Acpsu - Incisor blade with independent motor

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. Ksdpfjyfw Sysx Acpsdu A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Technical configuration of the machine: - Pre-milling unit - Material pre-heating - Automatic EVA glue application - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper - Grooving unit - Brushing unit - Return conveyor

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, * Drilling head with 8 spindles (V8 SW/32) * Horizontal drilling head with 4 spindles on the X-axis * Horizontal drilling head with 2 spindles on the Y-axis * Groove saw, D=100 mm (X-axis direction) * Clamping cylinder for positioning the workpiece Kedpjvtyc Hjfx Acpedu * Workpiece clamping system * Workpiece length 2500 mm * Workpiece thickness 12-60 mm * WOODWOP for the machine * WOODWOP IMPORT DXF BASIC (1 license)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550mm - Tool magazine: 14 positions - Drills: 9x vertical, 2+2 horizontal - Chip conveyor Kdodpfx Acjw Dv Hzspsu - WoodWOP 6.1

Condition: used, Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2 -Type: 2083015800 -Number: 3x control cards available -Price: per piece -Dimensions: 100/15/H170 mm -Weight: 0.1 kg Kedpfxjcc Ap Nj Acpedu

Condition: used, Control card, output card, control, edge banding machine, edge banding machine Kodpfx Acocc Enqjpsdu -Manufacturer: HOMAG HOMATIC -Type: 2 -Type: 2083015903 -Number: 7x control cards available -Price: per piece -Dimensions: 130/365/H30 mm -Weight: 0.58 kg

Condition: used, Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 4-086-05-0113 -Type: 4086050113 -Number: 1x control cards available Kodpjcc Enrsfx Acpodu -Price: per piece -Dimensions: 130/425/H30 mm -Weight: 0.63 kg

Condition: used, Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2 -Type: 2083015905 -Number: 1x control cards available -Price: per piece Ksdpfx Acocc Envepodu -Dimensions: 130/365/H30 mm -Weight: 0.58 kg

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -without: drive motors -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with: oscillation -Swiveling -Number: 3x units available -Price: per piece Kdodpocghhfefx Acpju -Dimensions: 400/160/H225 mm -Weight: 5.7 kg

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. One side feeding suitable for line. Element width 1250 + 1250mm Total length 6500mm Available immediately. Ready for work, possible to test. With full manuals. Kdjdpoktfvfsfx Acpsu

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Machine ables to process furniture cabinets (corpus) with dimensions: Ksdpfx Acjlkbn Ijpedu - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: good (used), HOMAG part number: 4-075-01-0692 (or others, e.g. -1268) NC-Axis positioning motor To be used e.g. in HOMAG edge banding machines e.g. for multi-scraping unit / profile scraping or Type PSE 401 C HOMAG part number: (e.g.) 4-075-01-0693 or -1267 NC-Axis positioning motor, 90 degrees drive To be used e.g. in HOMAG edge banding machines e.g. for multi-scraping unit / profile scraping Kdodpjt T Edfefx Acpju