Used Horizontal Boring Machine for sale (66,221)

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Dedpfx Aou Dahneizswd Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Dwjdpfx Asu T Ty Hsizsd Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Knuth Model: UFM 2 Year of manufacture: 2008 Serial number: 143516 WORK TABLE Table dimensions: 1,330 x 320 mm Number of T-slots: 5 Dwjds Ad Acqspfx Aizod TRAVEL RANGES Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Connected power: 5.3 kW MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,800 mm Height: 2,000 mm Weight: 2,000 kg

Condition: refurbished (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 009/2026, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 3,500 kg, spindle diameter: 100 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 1,000 rpm, total height: 3,110 mm, total length: 4,500 mm, total width: 3,200 mm, table length: 1,100 mm, table width: 1,000 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, table height: 100 mm, feed length W-axis: 600 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, rotational speed (min.): 10 rpm, rotational speed (max.): 1,000 rpm, type of input current: three-phase, workpiece weight (max.): 3,500 kg, drill spindle length: 1,600 mm, spindle stroke: 1,100 mm, control cabinet width: 620 mm, control cabinet length: 1,800 mm, control cabinet height: 2,300 mm, overall weight: 14,000 kg, year of last overhaul: 2026, Equipment: rotational speed infinitely variable, The machine underwent a complete overhaul in 2026 and is equipped with a Heidenhain iTNC530 control system, Siemens feed drive motors, a Controltechniques spindle motor controller, and Siemens motors. Dwsdj Ain T Repfx Aizsd

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. Djdpfoxwl Tbex Aizswd X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Weight approximately 200,000 kg.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, grinding wheel diameter: 200 mm, table load: 180 kg, spindle speed (max.): 2,850 rpm, TECHNICAL DETAILS Grinding length: 500 mm Grinding width: 250 mm Distance from table surface to spindle center: 450 mm Table load: max. 180 kg Table speed: 7–23 m/min Travel range X-axis: max. 560 mm Travel speed Z-axis: max. 990 mm/min Travel range Z-axis: max. 275 mm Travel speed Y-axis: max. 460 mm/min Grinding spindle power: 2.2 kW Grinding wheel diameter: 200 mm Grinding wheel width: 20 mm Grinding wheel bore: 31.75 mm Grinding spindle speed: 2,850 rpm MACHINE DETAILS Dimensions & Weight Dimensions (W x D x H): 2,300 x 1,650 x 1,680 mm Machine weight: 1,800 kg Connected power: 3.7 kW Dwedpfx Ao Airugsizod EQUIPMENT High-precision surface grinding machine of the Optimal series Automatic vertical feed Grinding cycle with roughing, finishing, and polishing Hydraulic table drive Infinitely variable table speed control Siemens S700 touchscreen panel Electronic handwheel for the Y-axis Digital position indicator for the Y and Z axes Table cover and splash guard caps made of stainless steel Control cabinet with predominantly Siemens components Manual dressing device Electromagnetic clamping plate Coolant cleaning system Standard grinding wheel Grinding wheel arbor Dressing stand with dressing diamond Balancing mandrel Balancing stand Machine light Machine tool set Documentation including parts list CE version in metric version

Year of construction: 2025, operating hours: 20 h, condition: like new (used), functionality: fully functional, Automatic Horizontal Flow / Pillow Packing Machine – Transparent Packaging Film Included – Excellent Condition The machine was purchased new in late 2025 from Anhui Dixin Machinery Technology Co., Ltd. specifically for our premium protein bar production operation. It has had very limited commercial use, is fully functional and in excellent condition. As a horizontal flow/pillow packing machine, it may also be suitable for: Protein bars, Energy and nutrition bars, Chocolate and confectionery, Snack bars, Biscuits and cookies, Bakery products, Other regularly shaped solid food products. The transparent film is included in the advertised price at no additional charge. Condition - Purchased new in late 2025, Very limited commercial use, Used in our dedicated food-production facility, Clean and well maintained, Fully functional, Excellent overall condition. Inspection & demonstration The machine is currently located in Wimbledon, London, United Kingdom. Available immediately. Inspection and demonstration can be arranged in London. Dwsdpfxezy Abnj Aizod We are selling also selling other equipment from our complete premium protein-bar production facility, including: Chocolate enrober with 30kg chocolate tank & 2.7m refrigerated cooling tunnel Protein/energy bar extruder and pneumatic cutter 60L Commercial chocolate melanger/refiner Commercial planetary mixer Stainless-steel production tables, sinks, racks and other food-production equipment Machines are available individually, or we can discuss a package price for multiple machines / a wider protein-bar production setup. Delivery: EXW Wimbledon, London, UK. Collection, loading, transport and installation are to be arranged by the buyer unless otherwise agreed.

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Dwedpfettv Uaox Aizod

Condition: new, Year of construction: 2026, functionality: fully functional, table load: 10,000 kg, spindle diameter: 130 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 800 rpm, total height: 3,800 mm, total length: 7,030 mm, total width: 4,665 mm, table length: 1,800 mm, table width: 1,600 mm, type of input current: three-phase, overall weight: 29,300 kg, spindle motor power: 15,000 W, MTP TPX6113-2 HORIZONTAL BORING MACHINE Horizontal Boring Machine TPX6113/2 – Precision and Power for Heavy Machining The TPX6113/2 horizontal boring machine is a robust and efficient solution designed for precise machining of large and heavy workpieces. Thanks to its rigid construction and high technical performance, it is ideally suited for use in the mechanical, energy, and steel structure industries. The machine is equipped with a Ø130 mm spindle, ensuring high stability and enabling demanding machining operations. A powerful 15 kW main motor and high torque guarantee efficient performance even under heavy loads. The large worktable (1800 × 1600 mm) with a maximum load capacity of 10,000 kg allows machining of heavy components without compromise. The full table rotation (B axis – 360°) increases flexibility and enables multi-side machining without repositioning the workpiece. Technical Specifications: Spindle diameter: Ø130 mm Max spindle torque: 3136 Nm Max spindle feed force: 31,360 N Number of spindle speeds: 24 Spindle speed range: 4–800 rpm Main motor power: 15 kW Max facing head torque: 4900 Nm Facing head diameter: 750 mm Facing head speed range: 2.5–125 rpm Number of facing head speeds: 18 Table size: 1800 × 1600 mm Dwsdpfx Aoy Eyg Ujizsd Max table load: 10,000 kg T-slots: 28 mm × 10 Axis travels (X/Y/Z/W/U): 2000 / 1800 / 2000 / 900 / 250 mm Table rotation (B axis): 360° Rapid feed (X/Y/Z/W): 2500 mm/min Feed per spindle revolution (X/Y/Z/U): 0.05–8 / 0.01–2 mm/rev Measurement system accuracy (X/Y/Z): 0.005 mm (Z optional) Measurement system accuracy (B axis): 0.001 mm (optional) Dimensions: 7030 × 4665 × 3800 mm Machine weight: 29,300 kg

Condition: used, Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm Fixed table Cone: SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Dwjdez Hv Hhspfx Aizsd Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Weight: approx 8 T

Condition: ready for operation (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 4,500 mm, SKODA WD 160 A BORING MACHINE Spindle diameter: 160 mm X-axis travel: 7,000 mm Y-axis travel: 4,500 mm Dedpfx Ajzb H N Toizjwd Z-axis travel: 1,200 mm B-axis travel (table): 360° W-axis travel (ram): 1,250 mm Rotary table: 2,000 x 2,000 mm - Maximum weight: 20 t - Longitudinal travel: 1,250 mm CNC: Fagor 8055 Electronic handwheel Spindle speed: 275 - 2,570 RPM Tool: ISO 50 2 x 90° square Universal and 90° head

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Djdpj Ad Iuxofx Aizewd TECHNICAL DETAILS Manufacturer: Knuth Model: VH F1 Machine type: Milling machine Machining process: Shank milling MACHINE DETAILS Length: 1,500 mm Width: 1,000 mm Height: 2,000 mm Weight: 700 kg

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, spindle speed (max.): 700 rpm, feed length X-axis: 15,000 mm, feed length Y-axis: 5,150 mm, feed length Z-axis: 1,600 mm, total width: 6,400 mm, total length: 19,300 mm, total height: 10,370 mm, feed length W-axis: 2,000 mm, spindle diameter: 250 mm, table height: 400 mm, table length: 8,000 mm, table width: 5,665 mm, overall weight: 137,000 kg, year of last overhaul: 2006, grinding spindle motor power: 83,000 W, type of input current: three-phase, We offer for sale a Škoda W250H floor boring machine. This machine is designed for machining heavy and large-sized components for the energy, shipbuilding, metallurgical, mining, and machine production industries. The machine is equipped with a Siemens Sinumerik 840D control system, enabling the execution of demanding boring, drilling, and milling operations. Dwodpfx Ajzrwq Ioized Complete technical documentation is available. Upon request, we can provide additional photos, videos, and information regarding the machine's equipment and technical condition. Standard equipment: Tool and measuring instrument storage rack, mounted on the spindle box. Optional equipment: Cooling system with coolant Rotary table 4000x3550 3 x angular heads

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,850 mm, Manufacturer: FPT Year: 2007 CNC Control: HEIDENHAIN Axis Travels X-axis: 7,000 mm Y-axis: 1,210 mm Z-axis: 1,850 mm Milling Head / Rotary Axes A-axis: 270° B-axis: -180° / +180° C-axis: 360° Djdozznupepfx Aizewd The machine is currently installed at our factory in Istanbul, Türkiye and is in working condition. The machine can be inspected under power at our facility. Further technical information, photos and videos can be provided upon request.

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support - Hardened and ground guide rails - Central lubrication - Position indicator The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev Dedpfx Aie Ahg Dtozowd - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Speed range: 240–2,240 min⁻¹ MILLING TABLE Table dimensions: 730 × 200 mm Number of table slots: 3 MACHINE DETAILS Dedpo Aduqmjfx Aizowd MACHINE Machine type: Horizontal milling machine Manufacturer: Hermle Model: FW710 DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,200 mm Height: 1,600 mm Weight: 400 kg EQUIPMENT 3-axis digital display, Heidenhain

Condition: repair required (used), Year of construction: 1998, operating hours: 34,188 h, functionality: limited functionality, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, torque: 165 Nm, controller manufacturer: Siemens, total height: 2,500 mm, total length: 10,000 mm, total width: 6,000 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are offering a Starrag Heckert CWK 400D horizontal machining center from 1998, which requires repair. Manufacturer: Starrag Heckert Model: CWK 400D Dsdpfx As Ah Sn Ssizswd Machine type: Horizontal machining center Year of manufacture: 1998 Condition: Requires repair If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. Dwsdpfxsu U Hvwj Aizsd bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: used, Year of construction: 1987, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Universal surface grinder Year of Construction: 1987 Machine Weight: approx. 1.5 t Dwsdpfxs Acg D No Aizod Working Area Grinding Length: 520 mm Grinding Width: 160 mm Workpiece Height: 300 mm Clamping System Electromagnetic clamping table: 520 × 160 mm Grinding Wheel Wheel Diameter: 230 mm Dimensions Length: approx. 1.5 m Width: approx. 1.8 m Height: approx. 1.6 m EQUIPMENT Rapid traverse in the Z-axis Hydraulic table drive External control cabinet Oil cooling for improved dimensional accuracy Coolant system

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 - Number of mounting threads: 23 x M12 - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer Dwedpfxj Afnc Eo Aized - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. Dodpfxjzk U Hwe Aizswd The machines can be inspected under power at any time by appointment.

Condition: used, Year of construction: 1998, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,200 mm, controller model: MSC 502, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,200 mm Number of axes: 4 Spindle speed: 60–6,000 rpm Spindle power: 30–37 kW Spindle mounting: ISO 50 / BT Number of pallets: 2 Pallet size: 1,000 × 1,000 mm Pallet load: max. 3,000 kg Workpiece diameter: max. 2,000 mm Workpiece height: max. 1,550 mm Workpiece weight: max. 3,000 kg Magazine type: Chain magazine Tool positions: 120 MACHINE DETAILS Dwodpfx Ais Agfrzjzjd Control system: MSC 502 Dimensions & Weight Machine weight: 35,200 kg Overall dimensions: 5,330 × 7,720 × 3,810 mm EQUIPMENT Pallet changer High-pressure coolant system Chip conveyor RS-232 interface Tool pre-setter

Condition: good (used), Year of construction: 2006, CNC Horizontal Machining Center, Manufacturer: HÜLLER HILLE, Type: BLUESTAR 5, Year: 2006 Control system: SIEMENS Sinumerik 840D. Travel distances: 700 mm (Y), 680 mm (Z), 700 mm (X) Rapid traverse rate: X, Y, Z: 50 m/min Pallet size: 500 mm x 500 mm Spindle connection: HSK 63, magazine with 40 positions Spindle speeds: Up to 10,000 rpm Dsdpfj Aicw Aox Aizowd Chip conveyor, internal cooling system, machine documentation available. Machine in good condition. Further details can be found in the data sheets.

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain Dwjdpfsizxbisx Aized - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: used, Year of construction: 1986, spindle diameter 1 mm x-travel 1 mm y-travel 1 mm Dwodpsylzv Ajfx Aized total power requirement 1 kW