Used Hydraulic Power Pack 200 Bar for sale (66,226)

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale Tedpfx Aofdkb Eenljb - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck Todpfob A Smwsx Anljb -without: interchangeable jaws -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm Tedpfjd E Tfpsx Anleb -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: System-S/N: H 01 07 000-1 / Motor-S/N: 0141708310002, overall weight: 1,200 kg, The Pregler hydraulic power unit is a reliable and high-performance solution for supplying hydraulic systems in a wide range of industrial applications. It combines high-quality components in a robust housing to ensure stable pressure supply and efficient operation. The unit is versatile and can be easily integrated into existing installations, while its durable construction ensures long service life. Tedpjwtgwiefx Anlob

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 10 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 ESTUN E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 10 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and ESTUN E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table simplify the positioning of large and heavy sheets while helping protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and improve accuracy during repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be configured for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 10 mm - Maximum cutting length: 3200 mm - Blade rake angle: 1°30′ Todpfx Anjyt Itqjljb - Cutting frequency: 10 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 3450 mm - Blade length: 3300 mm - Table height: 800 mm - Motor power: 15 kW - Weight: 10,000 kg - Dimensions (L × W × H): 4050 × 2050 × 1950 mm - Controller: ESTUN E21S - Cutting-line indicator: Illuminated STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Front and rear safety guards - Foot-control pedal - ESTUN E21S controller - Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English This guillotine shear combines high cutting capacity, straightforward control, accurate sheet positioning and practical safety equipment. It is suitable for general fabrication work and repeat industrial production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Simplex, hydraulic pump hand pump two-stage pump -Type: P- unfortunately no exact type designation -Pressure range: max. 10000 PSI 689 bar -Tank capacity: l -Quantity: 1x hand pump available -Dimensions: 740/200/H150 mm Tjdjwwq Exjpfx Anljb -Weight: 8.7 kg

Year of construction: 2014, condition: used, Planetary winch gear, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, drive unit - Manufacturer: Quadrangle, hydraulic motor drive unit -Type: 1302027STB1-0 -Operating pressure: 350 bar -Hydraulic motor: Rexroth A2FE125 / 61W-VAL 181 -Planetary gear: Bonfiglioli 715 C 3 B15FO129J2 -Individual components: see photos -Number: 2x unit available -Price per piece -Dimensions: 820/550 / H840 mm Tedpfx Aneg N Nf Teljb -Weight: 587 kg / pc.

Year of construction: 2014, condition: used, Planetary winch gear, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, drive unit, axial piston motor Tedpfxjg N Nf Ee Anljb - Manufacturer: Quadrangle, hydraulic motor drive unit -Type: 1302027STB1-0 -Operating pressure: 350 bar -Hydraulic motor: Rexroth A2FE125 / 61W-VAL 181 -Planetary gear: Bonfiglioli 715 C 3 B15FO129J2 -Individual components: see photos -Number: 2x unit available -Price per piece -Dimensions: 820/550 / H840 mm -Weight: 587 kg / pc.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 14 1/min, stroke rate (max.): 14 1/min, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,380 kg, total length: 3,840 mm, total width: 1,675 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 6 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 6 mm Maximum cutting length: 3200 mm Blade rake angle: fixed −2° Number of strokes per minute: 14 Back gauge travel: 20–600 mm (standard) Distance between side frames: 3450 mm Table height: 800 mm Motor power: 7.5 kW Weight: 7380 kg Machine dimensions (L × W × H): 3840 × 1675 × 1620 mm Equipment: Controller E21 Tjdpoyt E Ekjfx Anlsb Motorized back gauge Back gauge with ball screws Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Digital readout of the back gauge position Blade gap adjustment Set of blades Ball transfer units on the table 3 front support arms Front gauge with measuring scale Rear safety guard Front safety guard Illuminated cutting line Foot pedal CE declaration of conformity Manual in Polish Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 12 1/min, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 8 × 3200 E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 8 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 8 mm - Maximum cutting length: 3200 mm - Blade rake angle: 1°30′ - Cutting frequency: 12 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 3450 mm - Blade length: 3300 mm - Table height: 800 mm - Motor power: 11 kW - Weight: 7300 kg - Dimensions (L × W × H): 3850 × 2345 × 1620 mm - Controller: E21S - Cutting-line indicator: Illuminated STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Rear safety guard - Front safety guard - Foot-control pedal - E21S controller - Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty Todpfxsyt E U Ee Anleb - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English The machine offers a strong combination of cutting capacity, accurate sheet positioning, straightforward operation and comprehensive safety equipment. It is suitable for general fabrication work and repeat production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Year of construction: 1994, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bucher, hydraulic unit from press brake HACO type PPES 30135 Tsdpforc Ilkox Anlsb -Hydraulic pump: type QT43-020R -Engine: EMI 14.9 kW / 1460 rpm -Individual components: see photos -Dimensions: 970/420/H370 mm -Weight: 185 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Huss, hydraulic unit with additional hand pump -Pressure: 60 bar -Flow rate: 15 l/min -Engine: BBC 4 kW / 1435 rpm -Hydraulic tank -Pressure accumulator Tedpov Rm Abofx Anljb -Individual components: see photos -Dimensions: 1040/370/H550 mm -Weight: 166 kg

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,727 h, functionality: fully functional, overall weight: 4,824 kg, fuel type: diesel, tank capacity: 1,000 l, power: 160 kW (217.54 HP), output current: 288 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 200 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Stamford, For sale is a Powerplant AS200 IS2 diesel genset with 200 kVA prime power, manufactured in 2015, powered by an Iveco CURSOR87TE1F.S550 engine with Stamford alternator. Total operating hours: 6727h. A key feature of this unit is the HJS Emission Technology Stage IIIA to Stage V emission upgrade carried out by HJS Emission Technology UK in Swindon. The genset was equipped with a modern exhaust aftertreatment system designed to significantly reduce emissions and allow operation in emission-sensitive environments and projects. The genset is already registered with CVRAS/EST. In accordance with CVRAS/EST requirements, a telematics unit has been installed to monitor NOx performance. The first year of telematics service is included. After 12 months, an annual service fee applies. The telematics connection allows remote monitoring via the HJS online portal, including AdBlue refill status, system condition and NOx performance data, helping operators maintain compliance and monitor the system efficiently. The retrofit system combines proven exhaust aftertreatment technologies including: Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) SCR system with AdBlue injection The DPF reduces particulate emissions, while the SCR system lowers NOx emissions. The installed 80-litre AdBlue tank provides approximately 30 operating hours at full load without refilling, depending on load profile and operating conditions. This retrofit solution enables existing generators to meet modern Stage V emission requirements without the immediate need to purchase a new machine. Installed HJS components: 10.5” DOC 10.5” DPF 13.0” SCR 80-litre AdBlue tank Control unit Telematic unit AdBlue pump Fuse box Display The original silencer was removed during conversion. Operating time after the upgrade is only approx. 10 hours. This genset is ideal for construction, industrial, rental and infrastructure projects where low emissions and NOx monitoring are required. It is also suitable for use within London Low Emission Zones and other projects with strict emission regulations. Technical Specifications: Todpfxey R D Hce Anljb Generator make: Powerplant Model: AS200 IS2 Prime power: 200 kVA Engine: Iveco CURSOR87TE1F.S550 Engine power: 160 kW RPM: 1500 Alternator: Stamford UCI274H1 Control panel: Deep Sea Electronics DSE7410 Housing: Canopied Year: 2015 Dry weight: 3762 kg Wet weight: 4824 kg Voltage AC: 400V / 230V Voltage DC: 24V Frequency: 50 Hz Serial number: 4184/01 Note: Sold as a used industrial machine. Inspection and technical verification prior to purchase are recommended. All information is provided to the best of our knowledge based on available technical data. If you have any questions or require further information, please contact us.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Handover: in the current condition as viewed -Directional valve: missing, see photos -Manufacturer: Huss, hydraulic unit with additional hand pump -Pressure: 60 bar -Flow rate: 15 l/min -Engine: 4 kW / 1440 rpm -Hydraulic tank -Pressure accumulator -Individual components: see photos Tsdpsv Rm Rlofx Anleb -Dimensions: 1065/380/H510 mm -Weight: 135 kg

Condition: used, Colour: Green Tedpfxezxhxis Anljb Empty weight: 8.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 1000 - Table width [mm]: 600 - Table bore diameter [mm]: 140 - Ram length [mm]: 300 - Ram width [mm]: 300 - Height adjustment [mm]: 250 - Column spacing length [mm]: 2000 - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7.5 kW (50Hz) / 9 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Tedjhf Na Ijpfx Anlsb Weight: 70 kg Includes standard accessories.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit type HY 1359 -Engine: 2.2 kW Tsdpfx Aswk Hrbsnljb -Pressure: up to 105 bar -Flow rate: 10.5 l/min -Hydraulic tank: with filter and level indicator -Tank capacity: 63 liters -Individual components: see photos -Dimensions: 650/510/H740 mm -Weight: 105 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Yale, hydraulic pump hand pump -Type: HPS-1.7 -Pressure range: max. 700 bar -Tank capacity: 0.7 l Tjdpfxswwqxxj Anljb -Quantity: 1x hand pump available -Dimensions: 720/200/H170 mm -Weight: 8.5 kg

Condition: used, Year of construction: 2009, Overview  This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Tsdoy Etdgopfx Anljb Technical data  - Capacity: 35 ppm - Formats: 1.5 L – 3×2 - Application: Handle application for PET bottle packs - Configuration: Not provided - Operating hours: Less than 500 hours

Condition: used, CNC lathe GILDEMEISTER, type GD 160 with Gildemeister - Fanuc Mate TS control - Power chuck BERG, Ø 200 mm - 12-station tool turret, VDI 40 - 6 tool holders VDI 40, installed Machine footprint with chip conveyor: L x W x H 4200 x 2200 x 2100 mm Weight: approx. 4 tons Tsdpfx Ansy T R Irolob We are making room Affordable machine – ideal for export

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Tjdpfx Anoxcbmheljb Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056

Condition: good (used), Year of construction: 2007, Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg Todpsyghunofx Anleb

Condition: excellent (used), Offering a professional CEMBRE B35-50D battery hydraulic crimping tool – a high-quality tool for industrial applications. The device is in very good technical condition, fully operational, and ready for work. ⚙️ Technical specifications: Model: CEMBRE B35-50D Crimping force: 35 kN (4 tons) Max cable cross-section: up to 150 mm² (copper) Power supply: 9.6V Ni-MH battery Rotating head: 180° Type: hydraulic, battery-powered Operation: one-handed ✅ Applications: cable lugs cable connectors LV electrical / industrial installations service and maintenance 📦 Set includes: CEMBRE B35-50D crimping tool 2x batteries charger carrying case Tjdpfjy H Ri Asx Anlsb documentation / manual shoulder strap ⭐ Advantages: Very robust industrial construction Quiet operation and minimal vibrations automatic return after crimping high precision and repeatability convenient one-handed operation 📌 Condition: Used – shows normal signs of use, fully operational technically.

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 300 bar Todpfopvqy Iex Anlsb -Flow rate: 20 l/min -Individual components: see photos -Dimensions: 1500/1030/H1210 mm -Weight: 555 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: ABB ASEA, double hydraulic unit Tedpfx Aewxr N Ijnljb -Hydraulic pump 1: Motor ABB 3 kW 150 bar -Flow rate: 15 l/min, with pressure switch, pressure accumulator and filter -Hydraulic pump 2: ASEA motor 0.37 kw / 100 bar / 0.8 l/min -Hydraulic tank: with temperature/level indicator -Individual components: see photos -Dimensions: 785/570/H785 mm -Weight: 203 kg