Used Hydraulic Arm for sale (25,029)

Condition: good (used), Atom SE 20C hydraulic arm press The device is in perfect condition, ready to work. It is ideal for die cutting difficult materials, especially used in the leather and printing industries. Possibility of using typical leather and bookbinding dies. Cuts paper, cardboard, leather, plastic, etc. Pressure 20t Power supply 380V Table dimensions: 900mm x 430mm Hammer dimensions: 370mm Max stroke 90mm Engine power 0.9kW Weight 630kg Gjdpfx Agewundts Njuh Two-handed control.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 10 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 12G CNC, working width: 3,060 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 3 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 13 kW (17.68 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 7,800 kg, total length: 4,000 mm, total width: 2,800 mm, total height: 2,100 mm, number of support arms: 2, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Has only been used in a showroom. Excellent condition. With swing-away back gauge, automatic blade angle adjustment (0,5-1,5°), blade gap and cutting length over CNC control. Godjxnpliopfx Ag Neuh

Condition: used, New: No Empty weight: 200 kg Part suitable for: trucks ZL3000 Gedpjxipugofx Ag Njuh Occ hydraulische zuiger voor bediening hefarm Zettelmeyer ZL3000 Article nr.: S083327004-veiling Used hydraulic piston for operating the Zettelmeye

Condition: used, mileage: 453,000 km, Year of construction: 2018, Serial number: YV2R002C9JA82xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21236 Specifications: EU-approved until 28.09.2026 2018 model Approx. 453,000 km I-Shift gearbox Full air suspension Tires (see pictures) 20T Joab hooklift Hook with bend/kneeling function Crane hydraulics Retarder Euro 6 Length: 885 cm Width: 255 cm Axle distance: 460 / 137 cm Curb weight: 13,550 kg 6x2 664 hp Bull bar 2 sets of long-range lights Air horn (compressor horn) Tow hitch Reversing camera Toolbox Interior upholstery Bed Fridge Godpfx Agow Uckgs Njuh Radio / CD Climate control / AC Description:Well-equipped 2018 Volvo hooklift truck for sale.Equipped with crane hydraulics and a hook with kneeling function.Maintained under a gold service agreement until August 2025.Hook container can be included for an additional cost.Approved and ready for operation – quick delivery possible. Km: 453000 HK: 664 Technical approved: Yes EU-approved until: 28.09.2026 Own weight: 13550 Total Weight: 28000 Payload: 14375 Width: 255 Length: 885 Euro: 6 Model: FH16 Gearbox: Automatic

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 23,000 mm, total width: 7,800 mm, total length: 10,400 mm, pressing force: 25 t, table width: 780 mm, table length: 200 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, stroke length: 480 mm, operating pressure: 230 bar, oil tank capacity: 20 l, power: 3 kW (4.08 HP), MULTI-INZETABLE workshop / brooder press Available in both 20 and 25 tons. Gsdpfxst A Dzne Ag Nouh BAR-MAN 20: 3300 euro BAR-MAN 25: 3860 euro The BAR-MAN can be used for a wide variety of purposes. Think of maintenance work, cutting keyways, pressing in and out of bearings and much more. With this powerhouse you can do anything, while still working in comfort.

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Gedevbmtzopfx Ag Nouh Description: Year 2018 ISO 3A (51 cm) Capacity 4500 kg / 600 mm Opening range 1200-2350 mm ID OS1418

Year of construction: 2008, condition: used, machine/vehicle number: 0705012, load capacity 10,000 kg rope diameter 22 mm x 150 metres length according to information included in the documentation operating pressure 55 bar up to 80 bar maximum flow volume 19 litres / minute up to 272 litres / minute maximum hydraulic motor Rexroth hydraulic control block with mounting underframe documentation and inspection log book available The rope winch has been used on a test stand / test tower. Gedjiqhi Tjpfx Ag Njuh space requirements length - 2,100 x depth - 1,400 x height - 1,300 mm complete with control block weight approx. 1,500 kg  

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 3,000 kg, Telescopic fork tines ISO class: ISO class 3 = 2,500 - 4,999 kg Guedpfx Asw Erk Esg Njh Condition: Ready for use and fully functional Technical condition: good Description: Year 2017 ISO 3A (51 cm) Capacity 3,000 kg Opening range 1,150-2,250 mm Forks 1,150 mm 150x50 ID OS1667

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 3,000 kg, Telescopic fork tines ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2017 ISO 3A (51 cm) Capacity 3,000 kg Opening range 1,150-2,250 mm Forks 1,150 mm 150x50 ID OS1666 Gujdpfx Ajw Erkxeg Noh

Condition: used, functionality: fully functional, Year of construction: 2002, load capacity: 2,500 kg, Telescopic fork tines ISO class: ISO class 2 = 1,000 - 2,500 kg Gedjw Dwqbspfx Ag Njuh Condition: Ready for use and fully functional Technical condition: good Description: Year 2002 ISO 2A (41 cm) Capacity 2,500 kg Dimensions 150x45 Reachforks 1,200 - 2,050 mm ID OS1537

Condition: used, Year of construction: 2015, functionality: fully functional, Small lab Z-arm mixer / double sigma mixer Double jacket => heating with hot water or hot oil is possible Guedpfxsxlrako Ag Neh

Year of construction: 2016, condition: like new (used), machine/vehicle number: MBUT M2, Technical data: Binar Quick Lift QLA 50i Manipulator Handling Device Lifting Aid Payload at full extension 50KG Height: approx. 3.4m UK boom: approx. 3.2m Projection: approx. 1.30+1.50m Gjdpfx Agjpgmfij Njuh Lifting height: approx. 1.0-2.1m Weight completely approx. 300kg with scissor pliers for removing small parts Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table Guedpfx Asxmvawsg Njh • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Gjdpfxovgnr Aj Ag Nouh - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Guedpecmat Ujfx Ag Nsh Mechanical compression setting more photos an questions

Condition: good (used), Saxon Bag Sealer Gsdsv Dm Epspfx Ag Nouh With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Gujdet A U Irjpfx Ag Neh Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz

Year of construction: 2015, condition: like new (used), machine/vehicle number: MBUT M1, Übersetzungstypen Textübersetzung Ausgangstext Technische Daten: Binar Quick Lift QLA 35i Manipulator Handlingsgerät Hebehilfe Nutzlast bei voller Ausladung 35KG Guodpfx Aepgmdaeg Nsh Höhe: ca 3,35m UK Ausleger: ca 3,1m Ausladung: ca 1,80+1,60m Hubhöhe: ca 1,2-2,1m Gewicht komplett ca. 300Kg mit Scherenzange zum entnehmen von Kleinteilen Schwenkbereich 360° (über Knickarm), Anschluss an 400V 16A Kran ist demontiert und sofort verfügbar Artikelstandort ist 75053 Gondelsheim Es sind weitere Krane vorhanden, Traglast 80-5000Kg, bitte Anfragen Siehe Bilder Versand per Spedition oder Abholung nur nach Terminabsprache ​ 560 / 5.000 Übersetzungsergebnisse Übersetzung Technical data: Binar Quick Lift QLA 35i Manipulator Handling Device Lifting Aid Payload at full extension 35KG Height: approx. 3.35m UK boom: approx. 3.1m Projection: approx. 1.80+1.60m Lifting height: approx. 1.2-2.1m Weight completely approx. 300kg with scissor pliers for removing small parts Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: good (used), Hydraulic guillotine EBA 5560 A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple operation and at the same time the parameters of a large industrial machine. Guodpfxjwunlds Ag Neh The device worked in an office, it is the latest product of the German manufacturer Ideal. Year of production 2018. Control: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with stepless speed regulation of the rear limiter switching mm/inch Hydraulic knife and pressure beam drive Photocells cutting line Technical data: Cutting length 550 mm Infeed height 95 / 92 – with a strip under the beam Infeed depth 570 mm Front table depth 460 mm Minimum final cut 32 / 60 mm – with a strip Power supply 230 V / 50Hz Power 1.5 kW Weight 369 kg Dimensions 1520 x 1400 x 1370 mm

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Guodpfx Agjvgntto Njh - Hydraulic pump.

Condition: good (used), Load capacity: 50 kg Working length: 7000 mm Gsdpfoh Ri Svox Ag Nouh

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 144,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 2000 tons Composite press hydraulic (isothermal) Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) The press is connected and 100% complete. ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 145 tons YOM: 1986 The press is connected For molding thermoplastics, thermosetting materials, elastomers, rubber materials, and thin sheet metal. The press is equipped with a sliding table. - Molding of thermosetting materials in closed, open, and casting molds with complex cycles: heating and cooling, pressure build-up and release, dwell under load, and ejection of the finished product; - Isothermal forging of heated billets while maintaining a constant temperature of the die tooling and the billet; - Molding of powder materials, production of large-sized products from plastic masses and composites in closed heated molds; - Sheet stamping and sheet forming processes. The press has the following working and structural units and assemblies: - Working pair – ram and table, equipped with T-slots necessary for mounting additional attachments such as heating plates, which are included with this press. - Upper console (movable mechanism) with the main working cylinder mounted on it. The console moves along cylindrical guides. - Four return cylinders located on the table, ensuring smooth lifting of the ram and its return to the initial position. - Ejector mounted on the lower console (table). - Hydraulic tank and control valve mounted on the main cylinder, providing its lifting and lowering. - Spool valves and pressure regulators controlling the working cycle of the press. Installed on the hydraulic power unit with a high-pressure pump. - Limit switches ensuring the stability of the mechanical braking system of the ram. Installed on the frame. Gusdpfxew Hrids Ag Neh The D 2243 press is operated via a remote control panel. 27/08/2025

Condition: like new (used), operating pressure: 152 bar, power: 11.77 kW (16.00 HP), Hand starter, two-cylinder, with four-stroke engine Operating pressure: 152 bar Engine performance: 16 LE Overall Size: 1150 x 600 x 900 mm Condition: New Like Guedpfx Astp Hafog Njh

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm Guedetndu Uepfx Ag Nsh CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Gsdpfxovgnhwo Ag Neuh - Hydraulic pump.