Used Hyundai Robex 235 Lcr 9 for sale (143)

Condition: used, Year of construction: 2018, operating hours: 8,770 h, Equipment: all wheel drive, Hyundai HW140 * Operating weight approx. 13,880 kg * Engine: Cummins QSB 6.7 diesel, 117 kW, 157 hp, maximum speed 39 km/h * Digging depth approx. 4.85 m * Ground reach approx. 7.8 m, swing speed 11.6 rpm, fuel tank 270 liters * Transport width approx. 2.50 m * Transport length approx. 7.8 m * Transport height approx. 3.4 m The machine has only approximately 8,800 operating hours and is in very good condition. Djdpfxjzc Dtlj Anysuw

Condition: used, Year of construction: 2022, operating hours: 4,456 h, 2022 | Hyundai HX520AL | Used Tracked Excavator | 4456 hours 📍Location: Germany Dedpfx Anoza E N Asyjuw 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 172400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 55 approved ✅ 3 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: THE PRICE OF THE MACHINE IS SOLD WITHOUT HAMMER, WITHOUT BUCKET AND WITHOUT OILQUICK QUICK CHANGE. THE OILQUICK SYSTEM AND A BUCKET ARE AVAILABLE AT EXTRA COST. THE SHEAR IS NOT FOR SALE. The machine is in good condition and fully operational. There is a minor cosmetic damage on one corner. The machine was inspected about 1,000 hours of service prior. No new flaws were detected; however, the hydraulic oil is low. Notably, the machine has been serviced and the slew ring and bucket have no significant play. These areas should remain a focus of ongoing preventative maintenance. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40825 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Duedpfxexdxhre Anysw Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Djdpfx Aew Dcdyenysuw Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: new, Year of construction: 2024, functionality: fully functional, HYUNDAI-WIA SE2200M CNC LATHE WITH FANUC 0IT PLUS CONTROL AND C-AXIS MACHINE CONSTRUCTION & FEATURES  8” STANDARD CHUCK SIZE.  30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HIGH PERFORMANCE ROLLER LM GUIDEWAYS.  12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION INCLUDED]  4,500 RPM HIGH POWER MAIN SPINDLE.  30 X 36 M/MIN RAPID TRAVERSE RATES - X & Z AXES.  C-AXIS MAIN SPINDLE.  ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 288 MM Bar Capacity - Main Ø 65 MM MAIN SPINDLE Chuck Size 8” Ø 203 MM Spindle Bore Ø 75 MM Spindle Speed (Rpm) 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max.) 167 NM Spindle Type BELT Spindle Nose A2-6 C-Axis Indexing 360° (0.001°) FEED Travel X 210 MM Travel Z 340 MM Rapid Speed X 30 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDE TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP LIVE TOOL Motor (Max / Cont.) 2.75 / 1.85 KW Milling Tool Speed 6,000 RPM Torque (Max.) 26.2 NM Collet Size ER 20 - Ø 13 Type BMT45 TAILSTOCK HYDRAULIC NC TAILSTOCK (STD LIVE CENTRE) Taper MT 4 Quill Diameter Ø 56 MM Tailstock Travel 580 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 0.7 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 2,220 X 1,610 MM Height 1,700 MM Weight 3,250 KGS Djdpsx Trgcjfx Anysuw INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO (RENISHAW) HYDRAULIC TYPE NC TAILSTOCK TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-i (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FRONT DOOR INTERLOCK FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER TOOLBOX STANDARD TOOLING PACKAGE

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. Dujdpjlrqiqjfx Anyow • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 350 [mm] - Max. diameter on bench : 550 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 33 [mm] - Z stroke : 750 [mm] TURRET 1 - Number of positions : 12 - Live tools speed : 4500 [rpm] - X/Z stroke : 210 / 330 [mm] POWER SUPPLY - Supply voltage : 330 [V] - Total installed power : 22 [kVA] Dusdpfx Ansy N Ecveyow WEIGHT & DIMENSIONS - Machine floor space : 2070 x 1650 [mm] - Machine weight : 3900 [kg] MACHINE HOURS - Number of hours under power : 32645 [h] - Number of working hours : 6498 [h] EQUIPMENT - CNC : Fanuc Series Oi-TC - Coolant tank - Chips conveyor - Parts catcher

Condition: new, power: 5 kW (6.80 HP), gearing type: other, fuel type: gasoline, color: black, driver cabin: other, Vehicle location: Bovenden, Body: Hyundai gasoline high-pressure cleaner ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Djdpovhk Szjfx Anyouw - .

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: G1115-0025, turning length: 2,100 mm, turning diameter: 610 mm, spindle speed (max.): 1,500 rpm, bar diameter (max.): 165 mm, controller model: Fanuc i Serie, The machine is new and has no operating hours! TECHNICAL DETAILS Turning length: 2,100 mm Maximum turning diameter: 610 mm Y-axis travel: 150 mm Dedpfx Anjzdztdeysuw Spindle Speed: 1,500 rpm Maximum bar diameter: 165 mm Torque: 2,990/2,459 Nm Spindle nose: A1-15 Spindle bore: 21" 2-speed geared spindle Tool turret Tool positions: 12 x BMT 75 Speed of driven tools: 4,000 rpm Axes and tailstock Tailstock: MT #6 Tailstock stroke: 120 mm C-axis available MACHINE DETAILS Control model: Fanuc i series Power: 45/37 kW EQUIPMENT C-axis Steady rest optional

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Dedpfxjzdqrpo Anysuw Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket

Condition: used, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 620 mm control: YASNAC-J50M table-size: 1100 x 460 mm table load capacity: 800 kg tool taper: BT40 Revolution per minute: 30 - 10 000 U/min. spindle head: MAS / BT 40 distance spindle nose and table: 150 mm feed speeds infinitely variable: 8 m/min. rapid traverse:: x+y+z: 30+30+24 m/min tool changer with: 24 spindle hours: 1317 h operating hours - idle run: 7148 h air-pressure connection: ja bar total power requirement: 30 (kVA) Weight approx.: 5,0 t dimension machine xH: 2,9 x 2,5 x 2,85 m dimension swarf conveyor LxWxH: 3,0 x 0,9 x 1,3 m Dujdpfxsu Idf Ee Anysw other technical characteristics: max. drill Ø 40mm Facing 245 cc/min (cc/min) Thread cutting up to M 36 Compressed air connection Equipment: Chip conveyor with cooling water tank Interior lighting Operation via swivelling control panel CTS Machine feet Accessories: approx. 26 clamping spigots *

Condition: used, Year of construction: 2022, Technical details: Rated capacity: 13,5 kVA Revolution per minute: 20 U / min capacity: 11 KW type of fuel: Diesel voltage: 230-250 V / Hz battery: 45 A/h motor power: 11 kw weight: 318 kg dimensions L x W x H: ca. 1,2 x 0,7 x 0,9 m 2 St. Soundproofed (Silent) Diesel engine: LA290F; 2-cylinder; 3,600 rpm; tank capacity 53 liters; Battery voltage 12V Dujdpfxeu Nvd Ne Anyjw Generator: LDG12S-3; voltage 400V / 230V; 3.600 rpm; power: normal power 10kW max. power 11kW Power class G1 *

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Hyundai / Hanwha TechM Year of production: 2007 Duedpfsr Iy Nkox Anyow Maximum load: 200kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,585 h, machine/vehicle number: HHKHK607CE0000762, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, steel tracks, Year of manufacture: 2023 Operating hours: approx. 1,585 Engine: Cummins B6.7 Power: 129 kW (175 HP) at 2,000 rpm Emissions standard: EU Stage V Operating weight: approx. 22,100 kg Adjustable boom: 5,700 mm Stick: 2,400 mm Dusdpfx Ajxl R Iyjnyjw Stick safety valves Boom safety valve Central lubrication system (Beka Max) Bucket linkage available 2-way hydraulic lines Proportional control LED work lights Adjustable boom: 5,680 mm Rearview camera Hi-Mate telematics system (mobile version) Roadliner tracks (600 mm) Air-cushioned, heated operator seat Proportional joystick Standard safety railings Laminated front window 7 mm Fuel pump Piping for quick coupler Bucket/grapple mode switch No slew lock Hydraulic oil VG46 Rain cover 360° LED warning beacon Counterweight Standard Hyundai key

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 4 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,527 mm, fuel type: gas, mast type: triplex, construction height: 2,175 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New device Technical condition: New Sideshift, Dsdpfxoyt Tu Ho Anyjuw 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 2018, Hyundai vertical turning center, Type WIA LV500RM Dusdey S Sihjpfx Anyow Year: 2018 CNC: Fanuc Turret: BMT 75 Chip conveyor Tilting and fork-liftable chip bin (Goubard)

Condition: used, machine/vehicle number: 7380, Year of construction: 2020, operating hours: 3,465 h, load capacity: 3,000 kg, lifting height: 3,250 mm, fuel type: gas, mast type: simplex, construction height: 2,200 mm, Equipment: sideshift, .: 7380 Device details: Year of manufacture: 2020 Load capacity: 3000 kg Lifting height: 3250 mm Read operating hours: 3465 h Mast type: Standard Mast height: 2170 mm Length/Width/Height: 2800 / 1250 / 2200 mm Operating weight: 4512 kg ---- Equipment: * Safety roof * 3rd valve * 4th valve * Windshield * Roof cover * Work light front * Work light rear ----- Attachments: * Sideshift * Load guard ---- Further device information: ---- The operating hours are generally read hours. We are happy to offer you suitable transport. Dedpfx Aetw Anqenyjuw Another 250 - 300 forklifts, attachments, and sweepers available immediately for you. Also available for rent! We are happy to buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English This offer is subject to prior sale and errors. In dealer business, the device is sold as-is, not refurbished. All information is without guarantee, errors and changes reserved.

Condition: used, fuel type: diesel, Year of construction: 2020, operating hours: 5,710 h, Equipment: air conditioning, Drive: Wheel Empty weight: 14.000 kg Duedpfx Aozb Nanjnyew Dimensions (LxBxH): 769 x 250 x 314 cm Engine type: Cummins Cummins QSB6.7 Digging depth: 5.25 m Bucket volume: 0.27 m^3

Condition: used, Year of construction: 2019, operating hours: 5,520 h, Equipment: air conditioning, Year of manufacture: 2019 Duedoy Nwz Depfx Anysw Drive: Wheel Empty weight: 14.000 kg Dimensions (LxBxH): 769 x 250 x 314 cm Digging depth: 5.25 m

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Featured with: - Double footpedals - Chipconveyor - Machine manuals Dujdpexmvzujfx Anysw Country of origin: Z. Korea Motor power: 25 kW Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 Dusdpfx Asp T Ulzonysw SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Dedpfxsu Ehi As Anyjuw Table size 1000 x 460mm, Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor.

Condition: used, Year of construction: 2023, operating hours: 647 h, functionality: fully functional, CNC lathe Hyundai WIA HD2600 – Year of manufacture 2023 – Top condition For sale is a CNC lathe Hyundai WIA HD2600 from 2023. Technical data: Duedpfx Aezdcinenyow Manufacturer: Hyundai WIA Model: HD2600 Year of manufacture: 2023 Operating hours: only 647 h Condition: very good condition, almost new Chuck: SCHUNK Ø 400 mm Sale can include the chuck upon request The machine has been used very little and is in excellent technical and optical condition. It is ready for immediate use and can be inspected by appointment. Advantages: Very low operating hours Powerful and precise CNC lathe High-quality SCHUNK chuck Ø 400 mm Immediately available We are happy to provide you with further information, technical details or a customized offer. Parameter Value Max. turning diameter 460 mm Max. turning length 659 mm Diameter of rotation over bed 630 mm Diameter of rotation over slide 460 mm Spindle bore 91 mm Max. bar diameter 80–81 mm Spindle speed 3,500 rpm Spindle power 26 / 18.5 kW Spindle torque 734 Nm Spindle nose A2-8 X-axis travel 265 mm Z-axis travel 680 mm Rapid traverse X/Z 24 / 30 m/min Turret 10 stations Tool holder 25 mm / Ø50 mm Tailstock MK5 (Morse taper 5) Machine weight approx. 5,800 kg

Condition: good (used), Year of construction: 2018, functionality: fully functional, Siemens 828 chop-mill Palett 650x400 mm X/Y/Z 560/360/480 mm 24.000 v/min, BT 30 Big plus ATC 20 pos. Dodpfx Anoy S Ubtsyouw

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ Dedpfx Anex I A Hcsyeuw • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.