Used Immersion Coolers for sale (1,606)

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Guodpfewwv Ifox Am Aec Documentation

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Godpfx Aowx E N Ism Asuc Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: good (used), Year of construction: 2021, Hyfra Gamma 13 Active Immersion Cooler, Guedpsyfutzofx Am Asc Year 2021, Immersion coolers are designed for the cooling of water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and suitable for integration into various machine layouts. A stirrer ensures uniform medium temperature in the Gamma immersion cooler model. Easy cleaning is facilitated by crane eyes on the cooling unit. The HYFRA Gamma series models are designed as immersion coolers for cooling water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and can be used with a footprint of just 0.5 m². This makes them ideal for integration into different machine layouts. Thanks to their compact design, cooling capacities of up to 28 kW are possible with only 0.5 m² of floor space. This results in significant flexibility advantages in production floor planning and a marked increase in productivity, as more machines can be accommodated. In the compact models of our immersion coolers, the condenser is installed horizontally. Due to this design, the coolers generate considerably less waste heat. Internal components remain unaffected by residual heat. A robust stirrer ensures uniform medium temperature in the lubricant tank in all immersion cooler models of the series. The HYFRA Gamma series can be easily removed from the tank for regular cleaning using the fixed crane eyes. Immersion Coolers: High-Performance Cooling Directly at the Application Site How does an immersion cooler work? In immersion coolers, the evaporator is immersed directly into the cooling medium. The liquid is held in a tank and is agitated vigorously and continuously for efficient cooling. Powerful stirrers support this process. What are immersion coolers used for? Immersion coolers are commonly used for temperature control of coolant lubricants in filtration and mechanical engineering to ensure the performance of connected equipment. They are also used in metalworking for indirect cooling of tools and workpieces. Typical applications include CNC and conventional machine tools for milling and grinding. Immersion coolers with modern controls and extensive features Depending on the required cooling capacity, HYFRA Gamma immersion coolers are equipped with either FreeSmart or FreeAdvanced control systems. The combination of FreeAdvanced control and a touch panel provides a structured overview and allows real-time monitoring of relevant parameters. Both freely programmable controllers come with multiple digital and analog inputs and outputs. The FreeAdvanced controller also features a full-text display and supports Modbus-TCP.

Condition: excellent (used), Year of construction: 2023, Immersion cooler Deltatherm E 4 Suitable for cooling: oil – emulsion – water Temperature range: 10–40 °C Several units available Gedox Rrn Ispfx Am Asuc

Condition: good (used), Year of construction: 2022, machine/vehicle number: 25666, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) Gjdpey Tybzefx Am Aouc SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC Gjdjy Tybnspfx Am Aouc CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Gusdpfjw Iqumox Am Ajc Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,067 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Number of axes: 3 Spindle speed: 12,000 rpm Drive power: 12 kW Torque: 237 Nm Table size, X-axis: 1,270 mm Table size, Y-axis: 610 mm MACHINE DETAILS Gjdpfjzapr Usx Am Aeuc Number of tools in the magazine: 30 Tool holder: SK40 Operating hours: 12,000 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Gujdpfx Amezaprze Aec Number of axes: 3 Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Table size Y-axis: 610 mm MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Drive power: 12 kW Torque: 237 Nm Operating hours: approx. 7,200 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 22076049, wire diameter (max.): 9 mm, power: 18 kW (24.47 HP), spring diameter: 120 mm, wire diameter (min.): 2 mm, production capacity: 5,400 unit/h, The machine was equipped with a new control system in the year 2000! A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right-hand and left-hand coiled compression and tension springs, as well as leg springs. The springs can be produced with any desired pitch and spring body shape. TECHNICAL DETAILS Guedpezb Dapefx Am Aoc Wire diameter max.: 9 mm Wire diameter min.: 2 mm Production capacity max.: 90 pieces/min Outer spring diameter: 10 - 120 mm Wire feed speed: 27 - 80 m/min Wire feed length: unlimited Two-finger system Wire thickness: 2 - 9 mm Outer spring diameter: 10 - 120 mm Single-finger system Wire thickness: 3 - 7 mm Outer spring diameter max.: 60 mm MACHINE DETAILS Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 1,500 x 1,450 mm Lubrication system dimensions (L x W x H): 830 x 650 x 1,000 mm Control cabinet dimensions (L x W x H): 700 x 1,500 x 1,750 mm Machine weight: approx. 5 t EQUIPMENT 5x feed rollers, wire holder 3 mm, two-finger Spring length measuring device (Model: LION PRECISION-PANTHER) Wire coil holder POST, motor-driven, mandrel holder (diameter: 1,400 mm) Lubrication system Control cabinet cooler RITA Hydraulic unit

Condition: used, Year of construction: 2019, J&E Hall JEH-9100169-GAM-101 Ethylene Compressor Skid (2019) Godpfxozb Nhxs Am Aouc 32barg design pressure 0/110oC design temperature 2 to 27barg working pressure -50+64oC working temperature with Low stage compressor High stage compressor Oil separator Oil cooler

Condition: good (used), mileage: 1,122,638 km, power: 338 kW (459.55 HP), first registration: 10/2017, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,650 mm, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, tail-lift, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Tail lift - Manual - Radio/cassette - Sleeper cab - Lane keeping assist - Fabric - Auxiliary braking system Number of axles: 2, Configuration: 4x2, Unladen weight: 8900 kg, Gross vehicle weight: 18000 kg, Total tank capacity: 800 liters, Trailer coupling, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 392 tons, Suspension type: Full air, Cab type: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Parking cooler, Parking heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 338 kW (453 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Rotation: 1x20, System length: 81 cm, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: under-folding tail lift, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia DHS08.20, Tail lift material: Aluminum, Tail lift size: 183 x 230, Spare wheel, Spare wheel tread: 3 % Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 3 mm; Tire tread right: 3 mm Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread left inner: 3 mm; Tire tread left outer: 4 mm; Tire tread right inner: 3 mm; Tire tread right outer: 6 mm Weights Unladen weight: 8,900 kg Payload: 9,100 kg GVW: 18,000 kg Functional Tail lift: Dhollandia DHS08.20, under-ride flap, 2000 kg Loading platform height: 116 cm Maintenance APK (technical inspection): valid until 10.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price Gujdpfx Amszbxrtj Aoc • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly...

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels Guodonp Hwkspfx Am Aoc

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Gujdezbxvljpfx Am Ajc Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, color: yellow, overall weight: 975 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, digging bucket width: 340 mm, Year of construction: 2023, Equipment: additional headlights, GG JAPAN 1000 Gunter Grossman & Kubota The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. Gsdpfeh Uymysx Am Aouc 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable track undercarriage 6. Articulated Boom pro 7. Hidden driving motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy tracks for a pleasant ride.. 14.2 driving speeds We have all spare parts for machines of our brand available throughout Europe Price 11990 EUR (excl. VAT) (Including: Excavator GG1700 bucket 380 mm) SPECIFICATIONS Model: Japan 1000 Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated Power: 11.8kw/2300r/min Main pump: Parkier Swing motor: Eaton Drive motor: Eaton Driving speed: 3 km/h Stick: Movable sideways Driving speed: two speeds Drive Motors: Hidden Snakes in the style: Hidden DIMENSIONS Total dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770mm Total length of the track 960 mm WORKING RANGE max. Digging depth: 1650 mm max. Digging height: 2610 mm max. Digging radius on the ground: 2890 mm Turning radius: 360° max. Dozer Blade Upgrade Height: 345mm max. Dozer blade digging depth: 255 mm

Condition: new, functionality: fully functional, power: 11.03 kW (15.00 HP), fuel type: diesel, color: yellow, overall weight: 1,020 kg, empty load weight: 1,020 kg, operation weight: 1,020 kg, lifting height: 2,610 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Gunter Grossmann & Kubota Japan 1000 Y The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable crawler chassis 6. Articulated boom pro 7. Hidden travel motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy crawler tracks for a pleasant ride .. 14 servo joystick control 15.2 travel speeds We have all spare parts for machines of our brand available throughout Europe SPECIFICATIONS Model: Japan 1000 Y Gujdpfx Aovuk Uvjm Aec Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated power: 11.8 kw/2300r/min Main pump: Parkier Swing motor: Eaton Travel motor: Eaton Travel speed: 3 km/h Digging arm: Movable sideways Travel speed: Two speeds Drive motors: Hidden Style hoses: Hidden DIMENSIONS Overall dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770 mm Total track length 960 mm WORKING RANGE Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. digging radius on the ground: 2890 mm Turning radius: 360° Max. upgrade height of bulldozer blade: 345 mm Max. digging depth bulldozer blade: 255 mm

Condition: good (used), mileage: 296,872 km, power: 375 kW (509.86 HP), first registration: 04/2024, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 4,020 mm, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Driver's card (recording device) - Fixed - Globetrotter - LED lamp - Manual - Radio/cassette - Lane keeping assist - Fabric - Blind spot sensor = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8243 kg, Gross vehicle weight: 20500 kg, Total tank capacity: 1100 liters, 2nd diesel tank, Height of fifth wheel coupling: 116 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Globetrotter, Cruise control, Driver's card (recording device), Digital tachograph, Air conditioning, Parking cooler, Parking heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Type of lighting: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 375 kW (503 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: VOL, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Godpfx Aeyupdaom Asuc Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 5 mm; Tire tread depth right: 12 mm; Suspension: Leaf suspension Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 15 mm; Tire tread depth left outer: 15 mm; Tire tread depth right inner: 15 mm; Tire tread depth right outer: 15 mm; Suspension: Air suspension Weights Unladen weight: 8,243 kg Payload: 12,257 kg GVW: 20,500 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €1,365 per month (default, 72 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various model years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: good (used), mileage: 706,688 km, power: 331 kW (450.03 HP), first registration: 02/2018, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,010 mm, total width: 2,550 mm, total height: 3,680 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, = Additional options and accessories = - Heated mirrors - Digital tachograph - Tachograph (control unit) - Fixed fifth wheel - Halogen headlamps - Manual adjustment - PTO (Power Take-Off) - Radio/Cassette - Sleeper cab - Lane departure warning system - Central lubrication system - Auxiliary braking system = Notes = Number of axles: 2; Configuration: 4x2; Unladen weight: 8,518 kg; Gross weight: 19,000 kg; Total fuel tank capacity: 750 liters; Fifth wheel height: 117 cm; Fifth wheel: Fixed; Number of differential locks: 1; Central lubrication system; Suspension type: Air suspension; Cabin type: Sleeper cab; Cruise control; Tachograph (control unit); Digital tachograph; Air conditioning; Number of airbags: 1; Parking cooler; Auxiliary heater; Electric windows; Electric mirrors; Radio/Cassette; GPS navigation; Color: White; Heated mirrors; Lighting: Halogen headlamps; Lane departure warning system; Climate control; Seat heating; Bluetooth; Engine output: 331 kW (444 Hp); Fuel: Diesel; Emission standard: Euro 6; Transmission type: Opti-cruise; Gearbox make: Scania; Number of gears: 12; Auxiliary braking system; Retarder make: Scania; Power steering; ABS; ASR; PTO; Starter battery; Central locking; Seating configuration: 1+1; Seat cover: Leather; Seat adjustment: Manual = Further information = Transmission Transmission: SCA, 12-speed, automatic Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 385/55R22.5; Steered; Left tyre tread: 9 mm; Right tyre tread: 9 mm; Suspension: Leaf spring Axle 2: Tyre size: 315/70R22.5; Twin tyres; Left inner tread: 6 mm; Left outer tread: 7 mm; Right inner tread: 5 mm; Right outer tread: 5 mm; Suspension: Air suspension Weights Unladen weight: 8,518 kg Payload: 10,482 kg Gross vehicle weight: 19,000 kg Interior Upholstery: Leather Maintenance APK (MOT/Technical Inspection): valid until 01/2027 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 4 Identification Registration: KLEYN1 = Company information = Gujdpfsyu H Agjx Am Aoc Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a continually changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands across various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognisable quality • Competitive prices • Professional trading practices • Multilingual support • We understand our customers • Import and transport assistance • (Export) plates arranged swiftly • Expert technical services • The security of “recognisable quality” • And more…. Please visit our website for special offers and the full stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Enquire directly about our European warranty package.

Condition: good (used), mileage: 561,532 km, power: 375 kW (509.86 HP), first registration: 10/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,720 mm, total width: 2,550 mm, total height: 3,840 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, - 2. Diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Hydraulic system - Alloy wheels - Manual - Auxiliary drive - Standard sleeper cab - Pump - Radio/cassette - Lane keeping assist - Fabric - Xenon lamp Number of axles: 3, Configuration: 6x2, Tare weight: 10200 kg, Gross vehicle weight: 27500 kg, Total tank capacity: 575 liters, 2. Diesel tank, Fifth wheel height: 120 cm, Fifth wheel: Fixed, Number of locks: 1, Alloy wheels, Suspension type: Full air, Cabin type: Standard sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Xenon lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Flashing lights, Engine power: 375 kW (503 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Starter battery, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, LAST AXLE STEERING / BIG HYDRAULICS WITH OIL COOLER Transmission Transmission: VOL, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 2 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 1 mm; Tire tread depth right outer: 5 mm Axle 3: Tire size: 385/65R22.5; Lift axle; Steered; Tire tread depth left: 3 mm; Tire tread depth right: 8 mm Weights Tare weight: 10,200 kg Payload: 17,300 kg GVW: 27,500 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Gujdpsx H I Eujfx Am Asc Number of keys: 3 Financial information Leasing price: €789 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 835,118 km, power: 537 kW (730.12 HP), first registration: 01/2012, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 3,500 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, total length: 7,220 mm, total width: 2,550 mm, total height: 3,980 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, traction control, - Second diesel tank - Heated mirrors - Digital tachograph - Tachograph (control device) - Halogen lamp - Hydraulic system - Manual adjustment - Power take-off (PTO) - Pump - Sliding plate - Upholstery: fabric - Topline (cab type) - Additional braking system Number of axles: 3, Configuration: 8x4, Unladen weight: 13,100 kg, Gross weight: 42,000 kg, Total fuel tank capacity: 800 liters, Second diesel tank, Fifth-wheel height: 128 cm, Fifth wheel: slider type, Number of differentials locks: 2, Cabin type: Topline, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Parking cooler, Auxiliary heater, Electric windows, Electric mirrors, Color: Red, Heated mirrors, Lighting type: Halogen, Air conditioning, Flashing lights, Engine power: 537 kW (720 hp), Fuel: Diesel, Euro 5, Transmission: Opti-cruise, Gearbox type: Scania, Gears: 12, Clutch pedal, Additional braking system, Retarder brand: Scania, Power steering, ABS, ASR, Hydraulic system, Power take-off (PTO), PTO type: 1, Starter battery, Pump, Central locking, Seats: 1+1, Seat cover: fabric, Seat adjustment: manual Gearbox Gearbox: SCA, 12-speed, automatic Axle Configuration Brakes: Drum brakes Axle 1: Tyres: 385/65R22.5; Steered; Left tire tread: 7 mm; Right tire tread: 9 mm; Suspension: leaf springs Axle 2: Tyres: 385/65R22.5; Lift axle; Steered; Left tire tread: 4 mm; Right tire tread: 2 mm; Suspension: air suspension Axle 3: Tyres: 315/80R22.5; Twin-mounted; Left inner tread: 5 mm; Left outer tread: 8 mm; Right inner tread: 3 mm; Right outer tread: 6 mm; Suspension: air suspension Axle 4: Tyres: 315/80R22.5; Twin-mounted; Left inner tread: 4 mm; Left outer tread: 7 mm; Right inner tread: 6 mm; Right outer tread: 4 mm; Suspension: air suspension Weights Curb weight: 13,100 kg Payload: 28,900 kg Gross vehicle weight: 42,000 kg Functional Pump: Yes Gujdpfxoxx I Nuj Am Aec Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers for used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large and fast-turning stock • Recognizable quality • Competitive prices • Honest trading • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The reassurance of 'recognizable quality' • And more… Please visit our website for special offers and our complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 570,848 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,720 mm, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, - 2. Diesel tank - Heated mirrors - Digital tachograph - Electric - Trip recorder (control unit) - Fixed - Globetrotter - Hydraulic system - Alloy wheels - Auxiliary drive - Pump - Radio/cassette - Lane keeping assist - Fabric - Xenon lamp Configuration: 6x2, Tare weight: 10200 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 600 liters, 2nd diesel tank, Height of fifth wheel coupling: 124 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Alloy wheels, Cabin type: Globetrotter, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Xenon lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Flashing lights, Engine power: 375 kW (503 hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Starter battery, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Electric, LAST AXLE STEERING / BIG HYDRAULICS WITH OIL COOLER Transmission Transmission: VOL, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Guodpfx Ajxpm Nhsm Aec Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 9 mm; Tire tread depth right: 10 mm Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inside: 3 mm; Tire tread depth left outside: 4 mm; Tire tread depth right inside: 2 mm; Tire tread depth right outside: 3 mm Axle 3: Tire size: 385/65R22.5; Lift axle; Steered; Tire tread depth left: 13 mm; Tire tread depth right: 13 mm Weights Tare weight: 10,200 kg Payload: 16,800 kg GVW: 27,000 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €789 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Oiltech LOC-007-4-D-A air/oil cooler with AC motor-pump unit SN:4207452/10/3, used, normal signs of wear, 100% functional, delivery scope as per photos, ATTENTION: Please enquire separately for costs of packing and transport! Gedpjx Et Skjfx Am Aeuc

Condition: new, Brinkmann SGL802/1070-MV+313 submersible pump, serial number as per photo, immersion depth: 107 cm, flange diameter: 25 cm, unused with signs of storage, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gujdpfx Amoi D Hizo Ajc

Condition: new, Brinkmann SGL802/1070-MV+313 pump, serial number as per photo, immersion depth: 107 cm, flange diameter: 25 cm, unused with signs of storage, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Guedpfxoi D Hiwo Am Ajc

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gjdpfeul In Rex Am Ajuc