Used Immersion Pump for sale (9,098)

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Djdpfx Aoygxi Njggjkt Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Year of construction: 2023, condition: like new (used), functionality: fully functional, EDUR CBL 80-200/211 Centrifugal Process Pump, 111 m³/h, 28.8 kW, Stainless Steel, 2023 Description For sale: an industrial EDUR CBL 80-200/211 process pump from the renowned German manufacturer, EDUR Pumpenfabrik. The pump was manufactured in 2023 and is in fully functional condition, ready for immediate operation and requires no additional investment. The unit is made of AISI 304L stainless steel and equipped with an energy-efficient Lammers IE3 Premium Efficiency motor. The pump is mounted on a steel frame. It is ideally suited for use in the food, chemical, and oil industries, as well as in process plants. Technical data * Manufacturer: EDUR * Model: CBL 80-200/211 * Year of manufacture: 2023 * Condition: used, fully functional * Type: centrifugal process pump * Flow rate: 111 m³/h * Head: 56.1 m * Motor power: 28.8 kW * Motor: Lammers IE3 Premium Efficiency * Voltage: 400/690 V * Frequency: 50 Hz * Speed: 2900 rpm * Maximum working pressure: 10 bar * Maximum medium temperature: 60°C * Material: AISI 304L stainless steel * Motor protection class: IP55 * Weight: 308 kg * Available immediately Application The pump is designed for the transportation of: * vegetable oils, * animal fats, * biodiesel (FAME, UCOME), Dkjdey Amr Sopfx Agget * fatty acids (FFA), * food liquids, * chemical liquids, * process media, * process water. EDUR CBL 80-200/211 Process Pump | 111 m³/h | 56.1 m | 28.8 kW | AISI 304L | Year 2023

Condition: used, This listing is for 1 of 2 QuattroFlow QF15PTIU Single-use Pump Diaphragm Pump. Djdpexxz Iwjfx Aggskt The unit is in full working condition and is ready for immediate release. The QuattroFlow QF 150 PTIU is an advanced single-use quaternary diaphragm pump tailored for biopharmaceutical applications, offering several notable features and benefits that enhance its functionality in sensitive environments. Here’s a detailed look at its specifications and advantages: Key Features and Specifications: Flow Rate: Operates within a range of 0.02 to 3.2 lpm (0.01 to 0.85 gph), making it highly adaptable for various bioprocessing tasks. Design: Utilizes a 4-piston diaphragm positive displacement system, which ensures total product containment. This design minimizes the risk of abrasion and particle shedding, crucial for maintaining product purity. Materials: Constructed from disposable machined polypropylene, the pump is designed specifically for single-use applications, significantly reducing contamination risks. Control System: Equipped with an integrated controller, allowing for automated operation and precise control over pump functions, which enhances efficiency and consistency in processes. Certifications: Complies with USP Class VI and 3.1B standards, as well as CFR FDA regulations, ensuring it meets the stringent requirements for biopharmaceutical manufacturing. Applications: The QF 150 PTIU is versatile and suitable for various critical applications, such as: Filtration Systems: Ideal for use in Tangential Flow Filtration (TFF) setups, where it can efficiently process biological solutions. Chromatography Systems: Effectively manages the flow of reagents and samples during separation processes. Feeding Pumps: Provides reliable and consistent dosing in various bioprocessing applications. Virus Filtration: Plays a pivotal role in ensuring the safety of biopharmaceutical products by filtering out contaminants. Sterile Filtration: Maintains sterility in critical processing steps, essential for product integrity. Key Benefits: Total Product Containment: Ensures that no product is lost or contaminated during transfer, vital for high-value biopharmaceuticals. Low Pulsation and Low Shear Operation: These features preserve delicate biological materials and maintain their integrity throughout the pumping process. Variable Flow Rate: Allows for flexibility in operations, accommodating different process needs easily. Quiet Operation: Minimizes noise during operation, making it suitable for laboratory and clinical environments. CIP/SIP Capable: Facilitates easy cleaning and sterilization, ensuring high hygiene standards are maintained. Autoclavable: Supports sterilization processes, enhancing its usability in critical applications. Single-Use Design: Reduces maintenance requirements and downtime, allowing for efficient workflow in biopharmaceutical settings.

Condition: used, This listing is for a Cole Parmer Masterflex L/S 7554-95 Peristaltic Pump. The unit is in full working condition and is ready for immediate release. This unit is supplied with no pump head. The Cole Parmer MasterFlex L/S 7554-95 is a high-performance peristaltic pump designed for precise and reliable fluid transfer across a range of applications in laboratory, pharmaceutical, and industrial settings. Its versatile design and robust features make it an essential tool for any fluid handling needs. Features: - Versatile Applications: Ideal for transferring a wide range of fluids, including delicate biological fluids, viscous materials, and corrosive solutions. - User-Friendly Interface: Easy-to-read digital display and intuitive controls for straightforward operation and adjustment. - Durable Construction: Built for longevity with materials resistant to wear and chemical damage, ensuring reliability in demanding environments. - Quiet Operation: Designed to run quietly, making it suitable for laboratory settings without disrupting workflows. - Safety Features: Includes built-in protection against overload and dry running to extend pump life and ensure safe operation. Key Specifications: - Flow Rate: 0.6 to 3400 mL/min, adjustable based on tubing size Dodexxx U Uspfx Aggekt - Speed Range: 6 to 600 RPM for precise flow control - Pumping Method: Peristaltic pumping action for gentle and accurate fluid transfer - Reversible Pumping: Supports easy priming, purging, and efficient fluid transfer - Tubing Compatibility: Compatible with a variety of tubing materials and sizes for flexibility Ideal For: - Laboratory fluid transfer, pharmaceutical production, process scaling, and industrial fluid handling.

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: Dedpey H Dlqjfx Aggskt • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Dkedpfx Agox Sqi Hsgst Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Operating hours: 392 h, condition: used, Cogem engine-driven pump set 3''    • Maximum capacity 70 m3/h    • 125-liter tank    • Electric start    • Complete with suction hose Djdpfxozucnks Aggekt Condition: Used Year of manufacture: 0

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance 5-year warranty Dedpfxexv A Aks Aggokt Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids

Condition: used, Year of construction: 2007, functionality: fully functional, volume flow: 300 m³/h, final pressure: 0.5 bar, power: 7.5 kW (10.20 HP), rotational speed (max.): 1,720 rpm, We offer this used Gardner Denver VC 300 (01) vacuum pump, year 2007. Dsdpfx Aey Id I Ujggokt BOTH PUMPS – SOLD AS A SET Vacuum range: 0.5/10 mbar (abs.) Capacity: 300/360 m³/h Power (S1): 7.5/9 kW Speed: 1450/1720 rpm Serial number: 2711829 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Dkodpfxezivhts Aggst The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: good (used), Icon Engineering Steriliser tunnel Stainless, cold water steriliser tunnel, stainless chain belt, belt dimensions 1800mm x 360mm, max product height 250mm, variable speed, with recirculation pump, air knife, 3Ph Dsdpjzzf E Ejfx Aggekt

Condition: like new (used), Manufacturer: ILMVAC GmbH Year of manufacture: 2007 Machine number: A218855 Type/Model: U4.40 Vacuum: 0.5 / 1.0 mbar Motor speed: 2,920 / 3,460 rpm Connection: 230 V Suction volume: 41 / 48 m³/h Motor oil: Quantity: Condition: Presumably unused Weight: kg Dimensions: mm Dkodpfozzdzfsx Aggot

Condition: used, Edwards Maglev turbomolecular pump STP XA4503C (moz8950) + SCU1500 Controller. Fully tested. Dksdpfx Aeztbhtjggst

Condition: new, Year of construction: 2025, Equipment: all wheel drive, soot filter, Manitou MT625 H Comfort 75K ST5 S1 Telehandler 2.5t 6m The MT 625 H telehandler is designed for construction site applications in new building projects as well as renovation work on low-rise structures. This compact machine, just 1.80 m wide and under 2 m in height, easily fits through doorways and can navigate congested job sites with ease. Its turning radius of 3.30 m and three steering modes ensure outstanding maneuverability. The telehandler is user-friendly, equipped with an ergonomic dashboard and the JSM joystick for precise and simple operation. The MT 625 H offers a lifting capacity of 2.5 t and a maximum lift height of 5.85 m. Its 75 hp engine provides a top speed of 25 km/h. Maintenance tasks are simplified by the wide engine bonnet opening. The high-capacity 90-l gear pump enables simultaneous movement of the boom and telescope, enhancing productivity. Max. load capacity: 2,500 kg Max. lift height: 5.85 m Max. reach: 3.40 m Breakout force with bucket: 3,427 daN Overall length with fork carriage: 3.83 m Length to front of forks: 3.90 m Overall width: 1.81 m Overall height: 1.92 m Wheelbase: 2.30 m Ground clearance: 0.33 m Cabin width: 0.79 m Upward tilt angle: 12° Downward tilt angle: 117° Turning radius (over tyres): 3.31 m Weight: 4,800 kg Tyres: SKS532 12-16.5 Engine: Kubota Stage V, Tier 4 final Engine model: V3307-CR-TE5B Number of cylinders/displacement: 4 - 3,331 cm³ Dksdpfx Agoxmqt Esgst Engine power (hp/kW): 75 hp / 55.40 kW Max. torque / engine speed: 265 Nm @ 1,400 rpm Tractive force: 3,550 daN Transmission type: Hydrostatic Number of gears (forward/reverse): 2 / 2 Max. travel speed: 20 km/h Automatic negative parking brake Parking brake: oil-immersed disc brakes on front axle Hydraulic pump type: gear pump Hydraulic flow/pressure: 90 l/min - 235 bar Hydraulic oil capacity: 115 l Fuel tank capacity: 63 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R122 WhatsApp support available! If you have any questions about the vehicle or would like more information, feel free to message us on WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Manitou MT1840 easy Comfort Telehandler 18m 4t The MT 1840 Easy telehandler was designed for construction sites requiring substantial lifting heights. With a lifting capacity of 4 t, it enables safe pallet placement at heights of up to 17.55 m. This robust machine features a sheet metal-clad low door and an electric window to minimize the risk of breakage. The cabin provides excellent visibility, allowing the operator to constantly monitor site activities and track the load to its destination. Thanks to multiple lashing points, the MT 1840 can be easily transported from one site to another and, with 37 cm ground clearance, 3 steering modes, and 4-wheel drive, it adapts to any terrain. Max. load capacity: 4,000 kg Max. lifting height: 17.55 m Max. outreach: 13.08 m Breakout force with bucket: 7,400 daN Overall length with fork carriage: 6.15 m Length to front of forks: 6.27 m Overall width: 2.36 m Overall height: 2.45 m Wheelbase: 3.07 m Ground clearance: 0.37 m Cabin width: 0.89 m Tilt angle upwards: 16° Tilt angle downwards: 110° Turning radius (over wheels): 3.94 m Own weight (with fork): 11,710 kg Weight: 11,710 kg Tyres: 400/80 - 24 - 162A8 Engine: Deutz Stage V, Tier 4 final TD 3.6 L Cylinders: 4 - 3,621 cm³ Engine performance (HP/kW): 75 HP / 55.40 kW Max. torque / engine speed: 340 Nm @ 1,600 rpm Tractive force: 8,320 daN Transmission: torque converter Number of gears (forward / reverse): 4 / 4 Max. travel speed: 20 km/h Automatic parking brake, oil-immersed multi-disc brakes on front and rear axles Hydraulic pump type: gear pump Hydraulic flow rate/pressure: 106 l/min - 270 bar Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Steering wheels (front / rear): 2 / 2 Drive wheels (front / rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R64 WhatsApp support available! Djdpfx Agoxmqwqjgokt If you have any questions regarding the vehicle or require further information, feel free to contact us via WhatsApp. WhatsApp WhatsApp

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 38,000 kg, empty load weight: 11,820 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, Year of construction: 2006, operating hours: 9,184 h, We are selling our Bremat F2.15, manufactured in 2006, with a current operating time of 9,184 hours. The system is in good, age-appropriate condition and shows the usual signs of wear and tear. It is fully functional and ready for immediate use. Until recently, we were still using the system ourselves in our ongoing operations. The sale is solely due to the purchase of new equipment. Data & Condition: Manufacturer/Model: Bremat F2.15 Dksdpfezu Iiyex Agget Year of manufacture: 2006 Operating hours: 9,184 h Condition: good, age-appropriate signs of wear and tear Fully functional and ready for immediate use Next TÜV inspection due 08/2026 A new TÜV inspection can be carried out upon request and after consultation Sale is made with the system deregistered The upper cover sheet is missing and would need to be replaced. However, this does not affect the function or operational readiness of the system. An inspection of the system is possible by prior arrangement. Further information and pictures can be provided upon request and with serious interest. The system is sold as a used semi-trailer in its current condition.

Condition: used, Edwards Maglev turbomolecular pump, model STP XA4503C (serial number moz9430) + SCU1500 Controller. Fully tested. Dksdpfxeztblxj Aggot

Condition: good (used), functionality: fully functional, Item: LC-100826-FristamFPE FRISTAM FPE STAINLESS STEEL CENTRIFUGAL PUMPS Manufacturer: Fristam Pumpen, Germany Pump type: Hygienic centrifugal pumps Series: FPE Material: Stainless steel Condition: Used We offer 3 Fristam FPE stainless steel centrifugal pumps, suitable for hygienic applications in the food, dairy, beverage, and processing industries. Available pumps 1. Fristam FPE 3532 A Type: FPE 3532 A Serial No.: 0438460197 Stainless steel pump housing Hygienic connections 2. Fristam FPE 2552/250A Type: FPE 2552/250A Serial No.: 0458460117 Dsdezuzc Hopfx Aggjkt Stainless steel pump housing Hygienic connections 3. Fristam FPE 752/250A Type: FPE 752/250A Serial No.: 0482460083 Stainless steel pump housing Hygienic connections Applications Fristam FPE centrifugal pumps are designed for hygienic processing applications and can be used for transferring various liquid products, depending on the required capacity and product characteristics. Typical applications include: Dairy processing Milk and liquid dairy products Beverage production Food processing Water and process liquids CIP systems Other hygienic liquid applications The pumps have been disassembled and are available from our warehouse in Denmark. Motor power, RPM, and exact capacity are not specified at this time and should be confirmed before purchase. The pumps can be sold individually or together as a package. Location: Denmark Delivery: EXW Denmark Availability: Immediately available

Condition: used, This listing is for a 1 of 2 Charles Austin Capex 8C Diaphram Pump. The unit is in full working condition and is ready for immediate release. The Charles Austin Capex 8C is a highly efficient diaphragm pump designed to deliver a clean, oil-free vacuum and pressure source tailored for laboratory benchtop use. With its durable alloy casing and advanced engineering, the Capex 8C sets a new standard in versatile laboratory vacuum and pressure solutions. Features: - Oil-Free Operation: Ensures a clean environment, making it suitable for sensitive applications like microbiology and IVF treatments. - Quiet Running: Designed for low noise levels, ideal for use in laboratories without disrupting ongoing work. - Compliant with IEC 1010: Meets electrical safety standards, ensuring safe operation in laboratory settings. - Versatile Applications: Perfect for vacuum and pressure-assisted filtration, residue analysis, gas monitoring, and evacuating rotary evaporators or desiccators. - Lightweight Design: Easy to transport and reposition, enhancing usability across different workstations in a lab. Key Specifications: - Maximum Flow Rate: 8 L/min - Vacuum Level: 240 mbar (excellent for sensitive applications) - Pressure Capability: 200 kPa - Motor Type: Shaded pole motor for quiet and efficient operation - Dimensions: 282 mm (W) x 214 mm (D) x 137 mm (H) - Weight: 3.75 kg (lightweight and portable) Multipurpose Applications: - Microbiology Experiments: Ideal for creating a sterile environment during sample handling. - Embalming Procedures: Provides reliable pressure and vacuum for fluid transfer. - IVF Treatment: Ensures a clean, controlled environment for sensitive biological processes. - Waterjet Pump Replacement: A reliable alternative for general laboratory duties. - Aspiration and Filtration: Effective for removing particles and contaminants from samples. Dkjdpoxxx U Ijfx Agget - Beauty Therapy: Used for vacuum treatments in cosmetic procedures.

Condition: used, Hydraulic power unit, Bosch Rexroth complete industrial hydraulic power pack with 15 kW Siemens motor, HYDAC oil cooler and WOERNER control system, Used Machine MAIN MOTOR AND PUMPS: Dsdpjzxfnzsfx Aggskt Main drive motor: SIEMENS 15 kW (3~ Mot. 1LA7166-4AA61, 400/690 V, 1460 rpm, IP55, 99 kg) Rexroth main pump: A10VSO 28 DFLR/31R-PPA12N00 (250 bar, Vg = 28 cm³/rev) Rexroth 2nd pump: PGH5-21/080RE11VE4 (80 cm³/rev, internal gear pump) Rexroth 3rd pump: PGH2-22/006RR07VU2 COOLING AND FILTRATION: Oil cooler unit: HYDAC SA Cooling Systems (SCA 3L/40/2.0/M/A/1, max. 6 bar) Cooling circuit pump: HYDAC SYSTEM KFZP-3+4/3.0/P/90/40 (G 1 1/4") Cooling fan motor: A.O. SMITH 5.5 kW (400 V, IP55) Filter housing: REXROTH pressure filter housing (25 bar, 16.7 litres) CONTROL SYSTEM AND TANK: Temperature controller and display: WOERNER KTR-B/3/V300/T5/T5/TA (IP65) Hydraulic tank: Robust steel hydraulic oil tank with oil level indicator and inspection/cleaning opening. OVERALL DIMENSIONS: Width: 1700 mm Depth: 1300 mm Height: 1650 mm

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Djdpjxhfg Nofx Aggjkt Includes an RS‑232 serial interface for external control via software or integration into automation systems Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: used, This listing is for the Watson Marlow 323 Peristaltic Peristaltic Pump The unit is in full working condition and is ready for immediate use The 323 series from Watson‑Marlow is a benchtop “cased” pump line (sometimes called peristaltic or rotary tubing based pumps) designed largely for laboratory and light industrial applications. Key features include: Dkjdpfxoxhdu Eo Aggjt A drive unit (“drive”) plus interchangeable pumphead/tubing to suit different flow rates, tubing types, chemical compatibilities. Versions available with different levels of control: manual speed control; auto/remote control; analogue inputs/outputs; RS‑232 etc. A membrane keypad and digital LCD on most models to set/display speed etc. Build is robust: chemically resistant ABS top, IP31 protection rating

Condition: new, CP Pump Systems Stainless Steel Mag Drive Chemical Process Pump Type: MKP 50-32-250 Complete with ABB M3KP 180 MLA EX proof Motor 22kW Mag. 93Nm Q. 16 m³/h H. 75m n. 2950 min Dkodpeym Anvsfx Aggst IMP. 240 mm New, unused, ex stores stock

Year of construction: 2007, condition: good (used), functionality: fully functional, 1 x Multivac T400 Traysealer With gas flush facility 2 sets of tooling. Supplied with fully refurbished Busch vacuum pump.. Dksdpfx Agszhxgcjgjt Located in Melksham, Wiltshire

Condition: used, This listing is for a QuattroFLow QF15SU-U Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF15SU-U is a specialized 4-piston diaphragm pump designed for single-use in biopharmaceutical applications. Its features and applications make it particularly advantageous for handling delicate fluids. Here’s a closer look: Key Features: Single-Use Pump Chamber: Constructed from plastic, this design significantly reduces contamination risks and the need for cleaning between uses. 4-Piston Diaphragm Design: Ensures smooth and consistent flow, critical for sensitive applications. Self-Priming Capability: Can operate without priming, enhancing operational convenience, especially in processes where fluid levels fluctuate. Dry Running Capability: The pump can run dry without damage, providing flexibility in various operating conditions. No Rotating Parts: This design feature prevents heat generation and eliminates the risk of particle shedding, ensuring that the product remains uncontaminated and stable. Gentle Fluid Transfer: Designed to facilitate the safe and secure transfer of fluids, ideal for sensitive biological products. Applications: Djdpfoxxz Idsx Aggokt Biopharmaceutical Applications: Perfect for pumping aqueous solutions and biological products, especially those sensitive to shear forces, like proteins and enzymes. Research and Production Facilities: Suitable for use in laboratory or pilot plant environments, where precision and reliability are paramount. Re circulation of Feed/Retentate: Effective for processes involving membrane cassettes, hollow fibre, spiral wound, or ceramic filtration elements. Feed Pump for Filters: Works well as a feed pump for filter cartridges or plate and frame depth filters, ensuring optimal flow rates and minimal shear. Summary: