Several identically constructed KSB Etanorm-C 65-200 C7
!! Price per piece !
Type/Design
Horizontal volute casing pump, single-stage with
bearing bracket, in process design.
Shaft in the area of the shaft seal with replaceable shaft sleeve/
shaft sleeve.
Volute casing and impeller with replaceable wear rings.
Volute casing with cast-on pump feet.
Bearings:
Deep groove ball bearing grease lubricated.
Shaft seal:
Mechanical seal according to EN 12756
Coupling:
Bfhnlhsypo
Flexible coupling with/wit...
2 pieces Horizontal, crosswise split volute casing pump in process design, with radial impeller, single-entry, single-stage,
Manufacturer: KSB
Model: MCPK 050.032.200 CC
Drive power: 5,5kW kW
Delivery rate: 24m³/h
Delivery height: 40 meters
Speed: 2966 rpm
Year of construction: 2014
Shaft seal: Single mechanical seal.
materials:
volute casing: 1.4408
Housing cover: 1.4408
Shaft: A576 size 1045
Bmg9waszbn
Impeller: 1.4408
Parts in contact with the rest of the medium: 1.4408
Electric motor: Siemen...
2 pieces Horizontal, crosswise split volute casing pump in process design, with radial impeller, single-entry, single-stage,
Manufacturer: KSB
Model: CPKN-C3.1 040-160
Drive power: 5,5 kW
Delivery rate: 22m³/h
Delivery height: 36 meters
Speed: 2876 rpm
Year of construction: 2009
Shaft seal: Double mechanical seal with seal water connection and integrated flow meter.
materials:
Volute casing: Noridur 1.4593
Housing cover: Noridur 1.4593
Shaft: C 45+N
Impeller: Noridur 1.4593
Ofrq2
Remaining parts...
2 pieces Horizontal, crosswise split volute casing pump in process design, with radial impeller, single-entry, single-stage,
Manufacturer: KSB
Model: MCPK 40-25-160
Drive power: 2.2 kW
Delivery rate: 2.2m³/h
Delivery height: 37 meters
Speed: 2802 rpm
Year of construction: 2015
Shaft seal: Double mechanical seal with seal water connection and integrated flow meter.
materials:
Volute casing: Noridur 1.4593
H00pjg9mm
Housing cover: Noridur 1.4593
Shaft: C 45+N
Impeller: Noridur 1.4593
Remaining par...
2 pieces Horizontal, crosswise split volute casing pump in process design, with radial impeller, single-entry, single-stage,
Manufacturer: KSB
Model: CPKN-C3.1 100-400
Drive power: 30 kW
Delivery rate: 90m³/h
Delivery height: 55 meters
Speed: 1465 rpm
Year of construction: 2010
Shaft seal: Double mechanical seal with seal water connection and integrated flow meter.
materials:
Volute casing: Noridur 1.4593
Housing cover: Noridur 1.4593
Shaft: C 45+N
Impeller: Noridur 1.4593
Remaining parts in con...
Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump
-Drive: 1.1 kW 2840 rpm
-Max. Delivery rate: 6.0 m³/h
-Max. H: 36.8 m
-Pressure: max. 16 bar
-Max. Temperature: 120° C
-Price: per piece
-Number: 1x available
Vtxuyz3g7
-Dimensions: 205/210/H580 mm
-Weight: 22 kg
* General * SKUR0950 * LocationBarneveld * MakeKPA Kyffhauser Pumpen Artern (D) * TypeKN 35/2C * .12422-2 * Material * MaterialStainless steel 1.4404 (316L) * 23P01 * Pump * Capacity8 m3/h AT 20 M * With motor2,2 kW 400/230 Volt * Inletdia. 40mm * Outletdia. 40mm * Information * Year of construction2012 * Floorspace0,6x0,3 M * Total height0,3 M * Weight30 Kg * Extra SpecificationsCE What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to ne...
Axle configuration
Tyre size: 385/65R22.5
Make axles: Ror
Brakes: drum brakes
Suspension: air suspension
Axle 1: Tyre profile left: 90%; Tyre profile right: 90%
Axle 2: Tyre profile left: 95%; Tyre profile right: 95%
Axle 3: Tyre profile left: 20%; Tyre profile right: 95%
Measures
Dimensions (LxBxH): 1300 x 250 x 365 cm
Weights
Empty weight: 7.450 kg
Carrying capacity: 29.550 kg
GVW: 37.000 kg
Functional
Number of compartments: 1
Pump: Yes
Identification
Reference number: O000462
Other info...
General condition used Location Bremen Other
volume flow Q: 11,90 m³/h
Delivery head H: 18,60 m
Viscosity: 1mPas
Product density: 1,0 kg/dm³
product temperature: 20° C
Manufacturer: GEA Tuchenhagen
Voltage: 220-240/380-420 V (Euro voltage)
Frequency: 50 Hz
Protection class: IP 55
Power: 2,2 kW
Motor size: 90 L
O8qgl
Technical manufacturer information
Vertical multistage high-pressure centrifugal pump GRUNDFOS
Pump as good as new, but a part of the magnetic coupling has been dismantled.
Type CRN 10-09 MP-FGJ GI-V
Year of construction approx. 2012
Delivery rate at 7.2 bar: max. 10 m3/h
Delivery head: max. 91.8 metres
Power supply: 400 Volt, 50 Hz
Power: 3 kW
- Pump construction in 9 stages
- made of stainless steel 1.4401
- The new pump was used as a spare part dispenser, but there are several new pump chambers
- part of the magnetic coupling ...
Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump
-Drive: 0.55 kW 1405 rpm
-Max. Delivery rate: m³/h
-Max. Pressure: bar
2r7mlzih
-Max. Temperature: °C
-Dimensions: 140/180/H380 mm
-Weight: 19 kg
* General * SKUR0951 * LocationBarneveld * MakeKPA Kyffhauser Pumpen Artern (D) * TypeKN 35/2C * .12422-1 * Material * MaterialStainless steel 1.4404 (316L) * 23P01 * Pump * Capacity8 m3/h AT 20 M * With motor2,2 kW 400/230 Volt * Inletdia. 40mm * Outletdia. 40mm * Information * Year of construction2012 * Floorspace0,6x0,3 M * Total height0,3 M * Weight30 Kg * Extra SpecificationsCE What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to ne...
Axle configuration
Tyre size: 385/65R22.5
Make axles: Ror
Brakes: drum brakes
Suspension: air suspension
Axle 1: Tyre profile left: 80%; Tyre profile right: 50%
Axle 2: Tyre profile left: 30%; Tyre profile right: 45%
Dyiofct
Axle 3: Tyre profile left: 90%; Tyre profile right: 75%
Measures and weights
GVW: 39.000 kg
Dimensions (LxBxH): 1180 x 250 x 350 cm
Functional
Number of compartments: 1
Pump: Yes
Identification
Reference number: O800958
Other information
Chassis height: 100 cm
Height cou...
CR 45-3-2 A-F-A-E-HQQE
Vertical, multistage centrifugal pump with opposite suction and discharge ports (in-line design). The wetted parts of the pump are made of grey cast iron (head and foot piece) and stainless steel. The cartridge seal promises high reliability and ease of service. Power is transmitted via a rigid split coupling. The piping connection is made via combined DIN flanges.
The pump is equipped with a 3-phase, fan-cooled asynchronous motor
Btwxu70nmi
9
- UNUSED - originally purchased from a chemical plant to pump lye, it can also be used to pump other media. NEVER IN APPLICATION, stocked as spare part
monoblock design
Housing - stainless steel, 1.4408
Impeller - stainless steel, 1.4408
closed, diameter 130mm
Shaft - stainless steel
Shaft sealing - simple
MECHANICAL SEAL
Bfomm3tot3
Medium: caustic soda 3-5%, PH-value: 10-11
Flow rate: 45m³/h
Delivery pressure: 15.8 m
Viscosity: 1mPas
Temperature: max. 85 °C
Motor: BG 112M - Ex d IIB T4 - CEMP...
Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump
Ihhnuyd
-Drive: 4 kW 960 rpm
-Max. Delivery rate: 2.58 m³/h
-Max. Pressure: 3 bar
-Max. Temperature: °C
-Dimensions: 730/350/H310 mm
-Weight: 88 kg
* General * SKU046F285 * LocationBarneveld * Material * MaterialStainless steel * 23P01 * Number of pumps:1 * Capacity± 1100 Ltr/Hr * With motor3,0 KW, 380 Volt * Inletdia. 50mm * Information * Floorspace0,8x0,3 M * Weight60 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for ...
The high pressure centrifugal pump is used for pumping liquids such as water, drinking water, feed water and condensate. As new 0 operating hours.
Material: steel
Driving force: 110 kW
Max. operating temperature: 200 °C
Bsdwovyrif
Dimensions: L 2600 mm x W 800 mm x H 1000 mm
Empty weight: approx. 1500 kg
Speed: 2982 1/min.
Flow rate: 50 m3/h
Delivery hight: 450 m.
Operating voltage: 400 V
Type of protection: IP 55
Technical documentation: yes, in German language
Accessories: automatic pump prot...
Axle configuration
Tyre size: 385/65R22.5
Make axles: Mercedes
Brakes: disc brakes
Suspension: air suspension
Axle 1: Tyre profile left: 75%; Tyre profile right: 95%
Axle 2: Tyre profile left: 45%; Tyre profile right: 20%
Axle 3: Tyre profile left: 75%; Tyre profile right: 50%
Weights
Empty weight: 7.150 kg
Carrying capacity: 30.850 kg
GVW: 38.000 kg
Functional
Number of compartments: 1
Pump: Yes
Identification
Reference number: O291199
Other information
Chassis height: 100 cm
Height couplin...
Available quantity: 1x
Pump was tested for function, no noise
Nominal width: DN 65
Nominal volume flow: 30 m³/h
Nominal head: 30,5 m
max. Operating pressure: 16 bar
Pump speed: 2840
Mechanical seal: HQQE
Number of stages: 3
Pump casing: Stainless steel 1.4408
Impeller: Stainless steel 1.4401
J9hluj
Media temperature range: -20 ... 110 °C
Maximum ambient temperature: 60 °C
Rated motor power P2: 4.0 kW
Mains frequency: 50 Hz
Rated voltage: 380-415/ 660 V
Rated current: 8.4 /4.85 A
Insulation class...
Multistage centrifugal compressor, gas pump, Mapro CM 310 for biogas
1 piece used gas compressor in good condition for combustible gases, like biogas natural gas
Make: Mapro
Type: CM 310
O03rx
inlet pressure: 933 hPa
outlet pressure: 1123 hPa
three-phase motor 15 KW
Flange connection DN 80
Year of manufacture 2016
Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump
-Drive: 0.75 kW 2810 rpm
-Max. Delivery rate: 9.0 m³/h
J0r0docp
-Max. Pressure: 18 mWS
-Number: 1x pumps available
-Price: per piece
-Dimensions: 380/225/H565 mm
-Weight: 36 kg
* General * SKU338N560 * LocationBarneveld * MakeGrundfos Bjerringbro Denmark * TypeCRN3-8 X-FGJ-G-E-HQQE * .A99186852P11647 001 * Material * MaterialStainless steel * Pressure * Working pressure25 Bar * 23P01 * Pump * Capacity3 m3/H * With motor0,75 KW, 220-240/380-415 Volt * Inletdia.32mm * Outletdia.32mm * Information * Floorspace0.27x0.22 M * Total height0.60 M * Weight30 KG * Technical_specs * Extra informationmax. 25 bar What you can expect from Foeth: all our machines are in working condi...
Lowara SH Series pumps are designed to handle hot, cold and moderately aggressive liquids.
Specification:
Delivery: 84 m³/h up to 228 m³/h
Head: 35 m up to 62 m
Power: 30 kW, 2900rpm
Temperature of pumped liquid: from -10 °C to 120 °C
Included DANFOSS SOCLA filter JL1040 DN125 and GESTRA RK44 non-returning valve.
Price= 2950€ a piece
Quantity= 6 pieces
Shipping not included in price.
For more pictures and information, please contact us.
Bscndot77n
Item condition: New
Scope of delivery: With installation instructions + seals
Packing: Original packing
Manufacturer: Grundfos
Warranty in months: 12
O3gnn
Height: 231,4 m (max. 376,8 m)
Pressure (pmax): 50 bar
Volume (max): 3,5 m³/h
Frequency: 50 / 60 Hz
Speed: 4800 rpm
Power: 4,6 kW
Voltage: 380 - 480 V AC
Temperature: max. 90°C
Weight: 42.37 kg
Storage location: Rosenfeld
Storage location: P4A3_L
GRUNDFOS Electr. controlled glanded pump
Year of construction: 2000
Was installed in a heating plant that was not put into operation.
Pump has only been run for trial operation.
Condition like new.
Dispatch by forwarding agency possible.
You will receive an invoice with VAT.
Pump speed on which the pump data is based 2910 1/min
Nominal volume flow 90 m³/h
Nominal delivery head 19.5 m
Actual impeller diameter 134 mm
Nominal impeller diameter 125 mm
Mechanical seal BBUE
MATERIALS
Pump casing cast ...
SPX-APV centrifugal pump, 2,2 kw
wheel: 105 mm
inlet/outlet DN 50, 11851
Seal: single mechanical SIC/CAR
stainlaess steel cover
adjustable feeds
Oz3d7
Centrifugal pump, high pressure pump, water pump, centrifugal submersible pump, submersible pump, waste water pump,
-with central lubrication
2mecju8ro
-Drive: kW rpm
-Max. Delivery rate: m³/h
-Max. H: m
-Dimensions: 3275/350/H430 mm
-Weight: 117 kg
* General * SKU201P114 * LocationBarneveld * MakeKSB * TypeCPKN.C1.V 025-200 * No.P.105.100 * Year of construction2012 * Material * MaterialStainless steel 1.4408 * 23P01 * Pump"radial impeller" * Capacity5,0 m3/H (70m) * With motor5,5 KW, 380-420/660-725 Volt (ATEX II 2 G Ex de IIC T4) * Inletdia.40 mm * Outletdia.25 mm * Information * Mounted on frame * Floorspace1,1x0,4 M * Total height2,1 M * Weight150 KG * Extra Specificationsmechanical seal What you can expect from Foeth: all our machines ...
Design: Single-stage centrifugal pump from Wilo mounted on base plate
Type: N80-250-55/2-12
Manufacturer: Wilo
Year of construction: 2008
Documentation: no
Storage location: Warehouse Warburg I
Status: used - good
Delivery rate: 168 m³/h (max.)
Delivery head: 85 m (max.)
Material: - (Pump head made of grey cast iron (JL1040))
Connections: DN 100 (suction side)
: DN 80 (pressure side)
voltage: 400 / 690 V
Current intensity: 96 / 56 A
Power: 55 kW
revolutions: 2970 1/min
Protection...
Item condition: New
Scope of delivery: With installation instructions
Packing: Original packing
Manufacturer: Grundfos
Warranty in months: 12
Height: 228,8 m (max. 390,8 m)
Bs9atodnbk
Pressure (pmax): 30 bar
Volume (max): 4,0 m³/h
Speed (pump): 5225 rpm
Frequency: 50 Hz
Power: 5,5 kW
Voltage: 380 - 480 V AC
Temperature: max. 90°C
Weight: 50.32 kg
Storage location: Rosenfeld
Storage location P4A3_L
GRUNDFOS Electr. controlled glanded pump
Gd87739ly
Year of construction: 2002
Was installed in a heating plant that was not put into operation.
Pump has only been run for trial operation.
Condition like new.
Dispatch by forwarding agency possible.
You will receive an invoice with VAT.
Pump speed on which the pump data is based 2905 rpm
Rated flow 36 m³ / h
Rated head 16,4 m
Actual impeller diameter 128 mm
Impeller nominal: 125 mm
Primary shaft seal BUBE
Pump casing: Cast iron EN-JL1040
Impeller:...
ITEM: D-2855-WATER PUMP-GRUNDFOS
Water pumps, Grundfos
Bpvdtoyczx
NEW-Never used
Q 12,5 M3/H, H 19,9 M, 19/90 BAR
3 PIECES identical
Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump
Xdqof87ew
-Drive: 0.75 kW 2850 rpm
-Max. Delivery rate: 4.0 m³/h
-Max. Pressure: 12 bar
-Max. Temperature: 120 °C
-Dimensions: 290/210/H530 mm
-Weight: 24 kg
* General * SKU338N562 * LocationBarneveld * MakeGrundfos Bjerringbro Denmark * TypeCRN3-8X FGJ-G-E-HQQE * .A99186852P11647 * Material * MaterialStainless steel * Pressure * Working pressure25 Bar * 23P01 * Pump * Capacity3 m3/H * With motor0.75kw 220-240/380-415 Volt * Inletdia.32mm * Outletdia.32mm * Information * Floorspace0.27x0.22 M * Total height0.60 M * Weight30KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are re...
This stainless steel centrifugal pump is designed for standard applications Supply, Water (Processes, Heating/Cooling) Cleaning in Place, Cleaning Machines etc. Fields of application: Food industry, dairies, beverage industry, care products, pharmaceuticals, light chemical industry as well as water industry.
Btic0es3dd
Product condition New from old Stock
Case very good, no scratches
Guarantee in months 12
Height 11,8 m
Volume (max) 258 m³
Speed (Pump) 1460 rpm
Frequency 50 / 60 Hz
Rotation Speed 1460 / 1760 rpm
Power 11 kW / 12,6 kW
Voltage 400 / 690 V / 460 V
Current 21,5 / 12,4 A / 21 A
Protection Class (IP) 55
Weight 174.2 kg
Bsohhzqh0h
Stock location Rosenfeld
Stock ground P3B2
used, good condition from plant disassembly
1x Grundfos CRN1-2 A-FGJ-G-E-HQQE centrifugal pump
f: 50 Hz
n: 2873 /min
Q: 1,8 m3/h
P2: 0,370 kW
Hmax: 19,2 m
H: 15,6 m
Ba7fm0pale
p/t: 25/120 bar/°C
space requirement LxWxH: approx. 470 x 260 x 220 mm
Subject to alterations / errors in the technical data and subject to prior sale.
The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test protocol, which is part of our service.
The MMV Group offers you especially...
Material: body material nodular cast iron
Driving force: 75 kW
Max. operating temperature: 350 °C
Dimensions: L 1750 x W 720 x H 900 mm
Empty weight: approx. 700 kg
Speed: 2975 1/min
Flow rate: 240 m3/h
Brwxvkihql
Operating pressure: delivery head: 85m, discharge pressure: 16 bar
Operating voltage: 400 V / 460 V, frequency range 50 Hz.
Type of protection: IP 55
Technical documentation: yes, in German language
Message: this Etanorm SYT is unused. Volute casing pumps are used in heat transfer syst...
Centrifugal pump, water pump
-Feed rate Q: 200 m3 / h
- Conveying capacity H: 45 m
-Suction height: not visible
-Motor power: 45 kW
-Speed: 1455 rpm
-Pipe connection inlet: DN150
-Pipe connection outlet: DN125
Qkzchlm7o
-Dimensions: 1600/850 / H920 mm
-Weight: 720 kg
* General * SKU325N580 * LocationBarneveld * MakeBOMBAS FELEZ * TypeM-38 * Material * MaterialStainless steel * 23P01 * Pump"rotary pump" * Number of pumps:1 * With motor11 KW, 220/380Volt * Inletdia.70mm * Information * Mounted on wheels * With switch * Floorspace1.5x0.5 M * Total height0.95 M * Weight300 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome ...
2 pieces Centrifugal pump with 3 channel impeller with large orifice
2smomy
Equipped for short coupling with electric motor
990 rpm
459 m³/h x 7 m
2000 Euro / piece
