Used Index Ge 42 for sale (139)

Condition: good (used), Index HBF Hydraulic pump and oil pump Bedpod Tx A Tjfx Al Ajln Rod loader

Condition: good (used), Year of construction: 2014, See documents. List of individual machines with operating hours, etc. – see documents. Bedpfx Alszqtg As Aeln

Condition: ready for operation (used), Year of construction: 2011, operating hours: 27,865 h, bar diameter (max.): 24 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 6, This 6-axis Index MS 22 multi-spindle turning machine was manufactured in 2011. It features a Siemens Sinumerik 840D control system and includes a bar loader system with a maximum pressure of 6 bar. The machine is equipped with a Knoll coolant/filter system and various tooling attachments for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Index MS 22 machine we have for sale. Contact us for further details. - Nominal Voltage: 400 V- Rated Current (In): 99 A- Short Circuit Current (Icu): 50 kA- Peak Current (I2): 3.6 kA- Maximum Backup Fuse: 100 A- Rated Power: 64 kW- Connected Load: 67 kVA- Frequency: 50 Hz- Control Voltage: 24 VDC- Operating Hours: 124,075 h- Hydraulic Operation Hours: 61,189 h- Operating Time: 37,971 h- Production Time: 27,865 h- Control System: Siemens Sinumerik 840D powerline (Index C200-4D) with Dual NCU- Bar Loader System: IEMCA / SIR MS22 P flat loader, Type 33 (YOM: 2011, Pressure: 6 bar, Mass: 100 kg, Voltage: 400 V / 50 Hz, Current: 7 A)- Material Feeders: 1 set Ø12 with reducer tubes, 1 set Ø18 with reducer tubes, 1 set Ø24- Clamping Heads: Ø9, Ø10, Ø12 – Ø18, Ø20 – Ø22- Knoll Coolant/Filter System (YOM: 2011): 1x high-pressure pump (80 bar, 24 l/min), 1x high-pressure pump (40 bar, 55 l/min), 1x low-pressure pump (300 l/min at 4 bar)- Tooling Drive Connections: 2x electrical connections on NCU 1, 3x electrical connections on NCU 2- Tooling Attachments: 1x polygon turning device, 3x powered tool holders ER11 (i = 1:2, max speed 12,000 rpm), 1x powered tool holder VDI25 (i = 1:1, max speed 6,000 rpm)- Back-machining Unit: on slide 6.3 (with 2x powered tool holders, 1x fixed holder, i = 1:2, max speed 12,000 rpm)- Optional Equipment: Fire suppression system, Coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage design), Integrated ARTIS process monitoring system Bjdpfx Asz Ahy Isl Aeln Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2015, The machine will be delivered as shown in the photos, including the visible tool holders, etc. Bjdpfszlqavsx Al Ajln

Condition: used, Year of construction: 2008, control SIEMENS - - - - - - - - - - - - - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 Blodpfxszz S Itj Al Asn The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: ready for operation (used), Year of construction: 2002, bar diameter (max.): 32 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 12, This 12-axis Index MS32-P multi-spindle turning machine was manufactured in 2002. It features a Sinumerik 840D control system and includes a SIR MS32 face loader for efficient bar loading. The machine is equipped with a robust coolant system, including high-pressure pumps and a fire suppression system. If you are looking to get high-quality turning capabilities, consider the Index MS32-P machine we have for sale. Contact us for further details. - Main Spindles: 6x Drive spindle in drum- Counter Spindle: 1x Counter spindle (Position 6.3 Z with three-jaw chuck)- Axes Configuration: CNC driven and programmed - Slide 1: 1.4 X/Z - Slide 2: 2.4 X/Z - Slide 3: 3.1 X/Z, 3.2 X/Z, 3.4 X/Z - Slide 4: 4.1 X/Z, 4.2 X/Z, 4.4 X/Z - Slide 5: 5.1 X/Z, 5.2 X/Z, 5.4 X/Z - Slide 6: 6.1 X/Z, 6.3 Z- Additional Drives: 6x Auxiliary electric drives for cross-drilling or milling units (3 per NCU)- Control System: Sinumerik 840D (Index C200-4D) Dual NCU- Material Handling / Automation: Part catcher with conveyor belt- Bar Loader: SIR MS32 Face Loader- Coolant System: Connected to central coolant supply system (Knoll System)- High-Pressure Pump 1: 80 bar (24 liters/min at 80 bar)- High-Pressure Pump 2: 40 bar (55 liters/min at 55 bar)- Low-Pressure Pump: 250 liters/min at 3 bar- Fire Suppression System: Included- Coolant Mist Extraction & Filtration System: SH 2000-PEV-T/TR (two-stage design)- Process Monitoring System: Integrated ARTIS process monitoring system (DEFECTIVE)- Synchronization Device: For quill spindle position 6 (counter spindle)- Tooling Components: WTO driven tool holders visible in machining area- Tooling Status: Offered as basic machine without tools, holders, or live tool units (tools and bar feeder accessories available upon request) Technical Specification Counter Spindle Yes Bjdpsz E Inhefx Al Aeln

Condition: excellent (used), Year of construction: 2012, Index GU 600 H Data X: 181 mm Bedsy Urf Uopfx Al Asln Z: 650 mm Chuck: 200 mm Turret: VDI 30 / 12-station Siemens 840 D Main spindle: 65 mm Chip conveyor Coolant system Documentation

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 215 mm, travel distance Z-axis: 1,250 mm, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 RatioLine was manufactured in 2000. It features a nominal power of 43 kW and a robust machine weight of 6550 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Index G300 RatioLine horizontal turning machine we have for sale. Contact us for further details. Bedpfxoz Hb Nhj Al Aoln - Current Type / Frequency: 3 Ph / 50 Hz- Nominal Voltage: 400 V~- Control Voltage: 24 V-- Nominal Current: 78 A- Nominal Power: 43 kW- Cabinet Weight: 710 kg Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min Bedpfx Aex Emp Njl Ajln total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250 - Precision package for main or counter spindle - Selected spindle housing - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Condition: ready for operation (used), Year of construction: 1998, functionality: limited functionality, INDEX G200 in good condition. Limited operational capability, as the CPU for the chip conveyor is defective. MAIN SPINDLE Spindle bore, clamping tension mm 60 Spindle diameter at the front bearing mm 100 Spindle nose ISO 702/1 size 5 Chuck diameter mm 140/160 Max. nominal turning diameter mm 200 Max. swing diameter mm 420 Power Pmax 100% kW 7.5/13/20 Power Pmax 40% kW 13.3/22/29 Blodpfjzzp Dlox Al Aen Torque Mdmax 100% Nm 35/61/95 Torque Mdmax 40% Nm 64/105/140 Speed nmax min-1 5000 Alignment and switching device (division angle 2.5°) TAILSTOCK Spindle bore, clamping tension mm 60 Spindle diameter at the front bearing mm 100 Spindle nose ISO 702/1 size 4 5 5 1) - 2) Chuck diameter mm 140/160 Power Pmax 100% kW 7.5/13 Power Pmax 40% kW 13.3/22 Torque Mdmax 100% Nm 35/61 Torque Mdmax 40% Nm 64/105 Speed nmax min-1 5000 Min. distance, clamping chuck mm 15 Longitudinal travel mm 445 Rapid traverse m/min 22.5 Alignment and switching device (division angle 2.5°) Expansion stages (main and tailstock) C-axis (resolution 1/1000 degree) Workpiece stop device Coolant line through the working spindle Air blow-out line through the working spindle Speed monitoring system TOOL CARRIER Turret heads (identical for all tool carriers) Number of tools 14 Tool system DIN 69 880 size 25x48 Further information available upon request. Errors and prior sale are excepted. Can be inspected while powered on.

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Bedpsznmxmefx Al Aeln

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Bedpszu Sz Tsfx Al Ajln

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2420701, CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year 2004, serial no. 160024, - robot cell, - 7 clamping devices, - 3 rigid tool holders simple, - 3 rigid tool holder multiple, - 4 powered tool holders, - Suction Büchel Handlings and assembly robot cell Stäubli Unimation incl. basket translator with basket stack for raw and finished parts, two shuttles on top of each other for supply/removal baskets, Integrated measuring station Commissioning 2021 Connected load 24 kW, control, make Index, type C200-4D (Siemens 840 D basis), - 2 steering positions, - 6 spindles, - travel X/Y 300 x 500 mm, - bar diameter max. 52 mm, - - spindle speed max. 5000 rpm, -12 tool carriers, coolant system, - Industrial robot, make Stäubli, - programming panel, Bjdpjlmkucofx Al Aeln - extraction device, - settling device, - Accesories

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 57,000 W, overall weight: 14,000 kg, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This 3-axis Index G250 horizontal turning machine was manufactured in 2008. It features a maximum swing diameter of 560 mm and a turning length of 800 mm. The machine is equipped with a Siemens 840 D control system and offers a spindle speed range of up to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the Index G250 machine we have for sale. Contact us for further details. - Maximum Swing Diameter: 560 mm- Turning Length: 800 mm- Control System: C200-4D Siemens 840 D- Spindle Head: 8 DIN 55026/55021 ISO 7027/1- Bar Capacity: 90 mm- Spindle Diameter at Front Bearing: 140 mm- Drive Power – Spindle Motor (100% / 40%): 43 / 57 kW- Torque: 275 / 363 Nm- Indexing: 2.5°- C-Axis: 0.001°- Speed Range – Driven Tool Stations: ~6,000 min⁻¹- Drive Power – Driven Tool Stations: 11 kW- Torque (Driven Tools): 21.5 Nm- Rapid Traverse X/Z: 30 / 22.5 m/min- Feed Force (X): 7,200 N- Feed Force (Z): 9,000 N- Quill Diameter: 65 mm- Total Power Requirement: 51 kVA- Footprint: approx. 7.3 x 4.0 x 2.6 m- Optional Equipment: KNOLL chip conveyor system attached to the rear/side Technical Specification Bsdpozzmdcofx Al Ajln Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Bledpforqzzpex Al Asn Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Magazine: IEMCA 3300 mm capacity bar feeder

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel Bodpfjxc Idmex Al Aeln ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools! *

Condition: excellent (used), Year of construction: 2007, Siemens C 200 – 4D control Turning diameter: 100 mm Turning length: 280 mm 8-position turret with driven tools 6-position turret with driven tools Spindle speed: 6000 rpm Max. bar capacity: 60 mm Rear drilling unit for 5 stations Bljdpszwhkpofx Al Aon Knoll chip conveyor Coolant system

Condition: used, Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Bledpfxszgcp Ss Al Ajn Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: used, Year of construction: 2011, controller manufacturer: Siemens, controller model: C200-4D SL, _____ Description: Year of manuf. : 2011 Control : Siemens C200-4D SL In General: Year of construction:2011 Control system:Siemens 840 Dsl (C200-4D SL) Bjdpfoy Sq T Sex Al Aoln Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 10 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : AD140 - Spindle power : 25 / 33 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 160 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : AD140 - Spindle power : 25 / 33 [kW] Bledpfozz Aymex Al Aen - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 160 [mm] - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] - Rapid traverse rate : 50 [m/min] - Spindle / counter-spindle distance : 710 [mm] UPPER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 110 / 320 [mm] - Y stroke : 100 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] UPPER RIGHT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X stroke : 180 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] LOWER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 110 / 550 [mm] - Y stroke : 100 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 64 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 6.618 x 1.794 [mm] - Machine height : 2.139 [mm] - Machine weight : 9.000 [kg] MACHINE HOURS - Number of hours under power : 59431 [h] - Number of spindle hours : 29663 [h] EQUIPMENT - CNC : C200-4D (SIEMENS 840D) - Interface : Ethernet / USB - 3 colors status lamp - Options : Transmit / Tracyl - Tool breakage detection - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Spindle cooling unit - Coolant through spindle : et tourelles - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : INDEX MBL capacité 3.000 [mm] - Collet chuck : 2 HAINBUCH Spanntop Kombi Axfix Ø65

Year of construction: 2004, condition: ready for operation (used), Two identical Index CNC lathes including peripheral equipment and accessories are available. Main spindle: D90/Size 8, max. main spindle bore: 90mm, max. workpiece diameter: 340mm, max. workpiece length: 450mm, max. workpiece weight: 100kg, speed: 4200rpm, power: 35.5kW, torque: 550Nm, front bearing diameter: 140mm, clamping stroke: 32mm, clamping pressure: 80bar, travel X/Z: 1500mm/340mm, rapid traverse: 30m/min, feed force: 8kN, tool stations 1/2: 10/10, mounting plate dimensions X/Y: 300mm/490mm. Including coolant system, tool holders, clamping equipment and angle toolholders. Documentation available. An on-site inspection is possible. Expected to be available from autumn 2026. Individual sale possible. Bljdpfx Alozkld Ts Aen

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 22,000 W, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining Bodpfxsyailzj Al Aoln • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with c-axis • no driven tools Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 6 - Number of turrets : 3 MAIN SPINDLE - Spindle power : 29 [kW] Bjdpfezwqtmox Al Aeln - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 4.2 [kW] - Spindle speeds : 4500 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 280 [mm] UPPER LEFT TURRET - Number of positions : 5 - Tool type : VDI25 UPPER RIGHT TURRET - Number of positions : 8 - Number of motorized positions : 8 - X/Z stroke : 90/280 [mm] - Tool type : VDI25 - Live tools speed : 4500 [rpm] - Live tools power : 4.2 [kW] LOWER LEFT TURRET - Number of positions : 6 - X/Z stroke : 81/80 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] EQUIPMENT - CNC : INDEX C200-4D - Coolant tank : KNOLL * with high-pressure pump : 40 [bars] * with paper filtering unit - Chips conveyor - Oil mist extractor - Parts catcher - Parts conveying strip - Bar loader : BREUNIG - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] - Travel : 610 [mm] TURNING-MILLING SPINDLE - X stroke : 580 [mm] - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur Bjdszgx Ahjpfx Al Aoln - Tool magazine capacity : 140 - Tool exchange time : 6 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 114 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4800x2960 [mm] - Machine height : 3170 [mm] - Machine weight : 18500 [kg] MACHINE HOURS - Number of hours under power : 57184 [h] - Spindle hours : 1756 [h] - Number of turning-milling spindle hours : 1694 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Workpiece probe : Renishaw

Condition: used, Cnc multispindle lathe INDEX MS32C Bjdpfx Aozpznlol Aoln