Used Induction Heating for sale (13,043)

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Hsdpsuq Iy Rsfx Adzon Photo is from another system as mine is still packed

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed) Hedpfxjw Rpdre Adzsn

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Hodpfx Asyalbledzon

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, We offer a complete heating system for sale. The set includes the following equipment: 1. UNICAL Bahr 12 800 boiler from 2020, 2. Riello RL70 burner, 3. Control cabinet with automation, 4. Accessories and water treatment station, 5. Double-walled tanks 2x5000L. Full documentation for the set is available. The entire system is in very good technical condition. All devices are operational and ready for use. The system is suitable for heating a large house or another building. Sale with 23% VAT invoice. If you have any questions or need additional information, please contact us by message or phone. Hsdey N Sq Hopfx Adzjn

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Hedpjykvdlefx Adzsn Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: new, Boiler with feeder Ahena 250KW Solid/dry fuel boiler Output: 250 kW Capacity: 1100 litres Hedey E Sdrspfx Adzon Year of manufacture: 2016 CE certificate Brand new boiler, never installed

Year of construction: 2007, condition: like new (used), Technical data, please see in pdf document. Hjdpjha Dm Tefx Adzsn

Year of construction: 2024, condition: ready for operation (used), Offered is a continuous dryer/drying system: Drying units: Alraun infrared and hot air tunnel, transport system: Alraun railing belt TB70x300 (model 2233), infrared drying (model IR70x60/250C/2109): IR radiant heat, digital temperature controller A-Senco TR-85, adjustable upper alarm value (uPal) up to 300°C, hot air drying (model WL70x60/150C/480m³/h/2208): convection heat/hot air, air capacity: 480m³/h, temperature range: controlled heat up to approx. 150°C, transport system: Alraun railing belt TB70x300 (model 2233): drive: SEW-EURODRIVE gear motor, control: MOVITRAC®-LT frequency inverter infinitely variable speed control, dimensions X/Y approx. 700mm/3000mm, inspection possible by appointment. Hedpfxjyzr Hrj Adzjn

Condition: excellent (used), functionality: fully functional, 1 x Wraps (UK) Ltd automatic sleeve sealer with heat tunnel and gravity conveyor. Auto Sleeve Sealer: Model - AI60-351. Serial number - 3281. Belt width - 450mm wide. Previously used for 280mm wide film. Overall dimensions - 1450mm long x 1350mm wide. Hsdpfeyg Smbex Adzsn Heat tunnel: Model - M60-35TR. Serial number - 3279. Belt dimensions - 1950mm long x 530mm wide. Aperture (tunnel) - 620mm wide x 405mm high. Overall dimensions - 2020mm long x 1250mm wide x 1780mm high. Outfeed gravity roller conveyor: Roller width - 490mm wide. Overall dimensions - 2020mm long x 505mm wide x 970mm high.

Condition: excellent (used), Year of construction: 2016, Solid fuel boiler. In very good condition. Hedpfx Adjy Uzhrjzen

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 0790505, 1 X Rochman TR45/90H250 Heat Shrink Tunnel. The Rochman TR45/90H250 Heat Shrink Tunnel is a robust and essential piece of equipment designed to work seamlessly with an L-seal or side-seal shrink wrapper, this tunnel applies precise heat to shrink film tightly around items, ensuring excellent product presentation and protection. Technical specification: ⚙️ Manufactuer - Rochman ⚙️ Model - TR45/90H250 ⚙️ Machine number - 0790505 ⚙️ Year of manufacture - 2005 ⚙️ Power - 400V | 12-20Kw | 17-60A | 50Hz Hodpfxew Evkcs Adzsn ⚙️ Weight - 394Kg General information and benefits: ✅ Optimal Shrink Performance: Engineered to provide uniform heat distribution, resulting in a smooth, clear, and wrinkle-free shrink wrap for a polished final product. ✅ Versatile Product Handling: The model designation (likely indicating aperture dimensions of approximately 45cm width, 90cm length, and 25cm height) suggests it can accommodate a good range of product sizes, from small individual items to larger multi-packs. ✅ Adjustable Controls: Typically features precise temperature control and adjustable conveyor speed, allowing operators to fine-tune the shrinking process for various film types and product characteristics. ✅ Robust Construction: Built for durability and reliable operation in demanding production environments, ensuring a long service life. ✅ Enhanced Product Protection: Creates a secure, tamper-evident, and dust-proof package, ideal for transport, retail display, and extended shelf life.

Year of construction: 2006, operating hours: 30 h, condition: used, functionality: fully functional, machine/vehicle number: 4292-1-197652, Used process plant from production changeover. The unit is suitable for applications involving viscous or temperature-sensitive media. Sale from location, inspection possible by appointment. Hodpfsy Akm Hjx Adzon

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included Hodjwuqfyopfx Adzsn In excellent working condition

Condition: used, Heated Chocolate Mixing Tanks Qty 2 available Stainless steel Hedpfx Ajxtqx Ujdzjn

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 4,700 kg, total width: 2,400 mm, total length: 6,100 mm, total height: 2,550 mm, type of input current: DC, input voltage: 230 V, warranty duration: 12 months, input frequency: 50 Hz, Equipment: documentation/manual, hot water, We offer a ready-to-use modular boiler house solution with a 40 kW output, built into an ISO shipping container and designed for rapid installation and connection at your site. The module has served as a trade show sample, used for demonstration purposes, and is in excellent technical and visual condition. The boiler house module is suitable for heating buildings, construction sites, workshops, warehouses, or temporary facilities, as well as serving as a backup or emergency heating solution in situations where fast heat supply is required without permanent construction. The module is constructed on the basis of an ISO shipping container (approx. 2.4 × 6.1 × 2.55 m, weight ~4700 kg). Power supply 3N+PE 230/400 V, 50 Hz (~5 kW). The boiler house complies with CE requirements and has undergone conformity assessment (TÜV NORD). It is insulated. The boiler house module is equipped with: - DEFRO pellet boiler with automated feed system (output 40 kW) - Kospel domestic hot water boiler (~140 L) - DEFRO hot water accumulation tank (~800 L) - Expansion vessel for heating system - Circulation pumps - Control and automation system with electrical distribution cabinet - Natural ventilation and flue gas exhaust system For additional safety, the module is fitted with a gas extinguishing system, which can either remain or be removed by agreement, with price adjustments accordingly. The current system configuration allows for an increase in boiler output, as the components are suitable for operation with higher thermal capacity. The boiler can be replaced with a larger unit or supplemented with an additional one. Hedpfx Asy R Rrfedzjn The module is available for both purchase and rental. When renting, we offer a full service – boiler house maintenance, pellet supply and delivery, operational monitoring, and technical support. The renter does not need to handle system maintenance themselves. Additional information regarding the possibilities of increasing capacity, rental terms, delivery, and pricing is available upon request. Located in Riga.

Condition: new, Year of construction: 2023, functionality: fully functional, power: 70 kW (95.17 HP), 3 SPANNER Wood Power Plant HKA70 Wood Power Plant HKA70 consisting of: CHP unit with 68 kW electrical output, Type 70-7.4-V2.0: incl. synchronous generator, exhaust gas heat exchanger, silencer Wood gasifier, Type HV70-V2.0: incl. magnet for metal separation in sluice area, reformer, gas cooler section, Wood gas filter Remote maintenance and remote start module, CO warning system Control cabinet and connecting cables 3 x Mixed flow cooler HKA70 3 x Spare parts package HKA70 3 x Preheating HKA 3 x Sensor for heat-led interval operation 1 x Service flare 3 x Connection kit flare 1 x External VPN router 1 x Oil change device 1 x Heat exchanger cleaning device 1 x Mobile CO measuring device 1 x Pressure measuring device 1 x Fan Hjdpoy Ayhysfx Adzon 3 x Slanted residue discharge 3 x Failure head for residue discharge 3 x Connection conveyor channel – steel box 6 x Steel ash box 800 liters

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Hedpfx Adolvykxezon -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 1x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T Hsdpfsk S Dt Tjx Adzen - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, This listing is for the Grant QBT1 Heat Block The unit is in full working condition and is ready for immediate release Hedpfjx S H D Hjx Adzen The Grant Model QBT1 Dry Block Heater With 24x10.5mm Well Block is a compact dry block heater designed for laboratory temperature-controlled heating of small sample tubes. It’s part of Grant Instruments’ dry block heater family, used widely in molecular biology, biochemistry and general lab work for consistent incubations or reactions in tubes A dry bath / heat block heater that provides precise, stable heating for tubes (especially 1.5 mL Eppendorf-style tubes), without using water or oil baths. The heat is delivered through a removable aluminium block tuned to fit a specific tube format — in this case typically 24×1.5 mL tubes

Condition: used, This listing is for a Packer P400-C Impulse Heat Sealer. The unit is in full working condition and is ready for immediate release. The Packer P400-C Impulse Heat Sealer is a versatile and efficient tool for sealing plastic bags and various materials. Here’s a detailed overview of its features: Key Features: - Seal Width and Thickness: Capable of sealing materials up to 400mm wide and handling a maximum thickness of 2 x 750 gauge (or 200 microns), making it suitable for a wide range of packaging needs. - Compact Dimensions: Measures 580mm x 83mm x 230mm and weighs 6kg, allowing for easy portability and storage without taking up much space. Hjdpfsxxyaxjx Adzon - Impulse Heat Operation: Utilizes an impulse heat mechanism that generates heat only when the jaws are closed, providing efficient and quick sealing without overheating. - Integrated Timer and Cutter: Equipped with a timer for precise control over sealing time and a cutter for neat cutting of sealed bags, ensuring a professional finish. - Versatile Applications: Ideal for use in various environments, including offices, factories, and laboratories, making it a valuable tool for both commercial and personal packaging needs. Applications: The Packer P400-C is perfect for packaging food items, retail products, or any materials that require secure sealing. Whether you're running a small business or managing inventory in a lab, this heat sealer combines convenience with effective performance.

Condition: used, This listing is for 1 of 3 Velp Scientific HSC Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Hodpexx Ai Nofx Adzon Heating control: Analog Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

Condition: used, This listing is for a Thermo Scientific Heat Block The unit is in full working condition and is ready for immediate release The Thermo Fisher Heat Block – Dry Bath is an advanced and versatile laboratory device designed to meet a variety of heating needs in research, clinical, or industrial applications. This digital dry heater offers precise control over temperature and time, making it ideal for experiments that require consistent and uniform heating. Key Features: Dynamic Temperature Stability: This heat block provides excellent temperature uniformity of less than ±1.0°C and temperature accuracy of less than ±0.5°C at 37°C, ensuring reliable and reproducible results. Proportional-Integral-Derivative (PID) Controller: The PID controller offers precise control over the heating process, allowing users to select specific temperatures and times. The system also enables fast heat-up for samples, optimizing workflow and reducing wait times. Hedpjxv D A Ejfx Adzjn Wide Temperature Range: Temperatures can be set in 0.1°C increments, ranging from ambient +5°C to 130°C, making the heat block adaptable for a wide range of applications. Programmable Timing: The heat block includes a programmable timer that can be set for up to 99 hours and 59 minutes. This feature allows users to run multiple processes without needing to monitor the heating continuously. Interchangeable Blocks: The Thermo Fisher Heat Block is designed for flexibility, with interchangeable blocks that can accommodate various tube sizes, vials, and microplates. This makes it suitable for a broad range of lab applications. Digital Interface: The heat block features a user-friendly digital interface, making it easy to set and adjust the temperature and time. Reliability for Multiple Applications: These dry baths are an excellent choice for labs needing a sophisticated, reliable heat block for applications like PCR, enzyme digestion, sample incubation, and more.

Condition: used, This listing is for a Grant QBT1 Heat Block. The unit is in full working condition and is ready for immediate release. The Grant QBT1 Heat Block is a compact, highly precise dry block heater designed for laboratory applications that require consistent temperature control. This unit is ideal for heating and incubating samples in 1.5 mL Eppendorf tubes, and it is known for its reliability and ease of use. Key Features: Wide Temperature Range: The heat block operates within a temperature range of ambient +5°C to 150°C, making it suitable for a variety of laboratory applications. Hsdpoxxz Uqefx Adzon Precision Temperature Control: With ±0.1ºC temperature stability at 37°C and uniformity of ±0.1ºC within the block and ±0.2ºC across similar blocks, it ensures accurate temperature maintenance for sensitive samples. Digital Display: The display has a 1°C resolution, allowing for easy monitoring and precise setting of the temperature. Heating Block Capacity: Equipped with a block for 24 x 1.5 mL Eppendorf tubes, it provides ample space for small sample incubation's, making it ideal for molecular biology and biochemistry experiments. Efficient Heating: The heat block has a heat-up rate of 40 minutes to reach the maximum temperature from ambient conditions. Compact and Portable: With dimensions of 205 x 180 x 122 mm and a weight of 3.6 kg, it is a compact unit that fits easily on a laboratory benchtop.

Condition: used, This listing is for the Velp Scientifica T Are F20520170 Heating Stirrer The unit is in full working condition and is ready for immediate use Overview: Velp Scientific T.ARE The T.ARE is part of Velp Scientifica’s line of heating magnetic stirrers—lab devices combining a hotplate and a magnetic stirrer. These instruments are commonly used to heat and mix solutions efficiently and safely. Key Features & Specs for T.ARE According to available technical data: Hjdpfjxx Akmox Adzon Power: Approximately 1300 W—making it one of the most powerful in the ARE series Voltage Options: Available in 115 V or 230 V, 50–60 Hz configurations Dimensions: About 190 × 110 × 245 mm and weighing roughly 3.1 kg While specific details on maximum temperature or stirring volume for T.ARE aren't listed, other Velp ARE models typically reach up to 370 °C, handle up to 15 L of water, and provide stirring speeds up to 1,500 rpm Given its higher wattage, the T.ARE likely offers performance on par with or exceeding those specs

Condition: used, This listing is for a IKA RCT RET B C Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT RET B C Heating Magnetic Stirrer is a reliable laboratory device designed for precise heating and stirring tasks. Combining a robust heating plate and magnetic stirrer, it ensures accurate temperature control and efficient sample processing. Key Features: Durable Heating Plate: Made of aluminium alloy, the plate ensures optimal and uniform heat transfer for consistent sample heating. Temperature Control: Offers a maximum temperature of 310°C with a temperature control mode for faster and precise medium heating. Versatile Magnetic Stirrer: Features a speed range of 50-1500 rpm, capable of handling up to 20 L stirring volume. Suitable for a wide range of laboratory applications. Safety Features: Includes a fixed safety circuit that shuts off the unit at 370°C and a hot surface warning to prevent accidental burns. Digital Display: Allows exact temperature and speed settings, even when the device is switched off, ensuring ease of use and precision. Advanced Connectivity: Equipped with USB and RS232 interfaces for remote control and documentation of test parameters via a PC. Compatible with labworldsoft laboratory software for enhanced functionality. Technical Specifications: Motor Rating Output: 9 W Heat Output: 600 W Temperature Range: Room temperature + device self-heating to 310°C Speed Range: 50-1500 rpm Stirring Bar Length: 20-80 mm Set-up Plate Material: Aluminium alloy Set-up Plate Dimensions: Ø 135 mm Hjdpfx Asxxz T Tedzon Dimensions: 160 x 85 x 270 mm Weight: 2.5 kg