Used Induction for sale (631)

Condition: new, - Dimensions: 700x750x750/1050 mm - 1 heating zone - Cooking plate diameter: Ø 300 mm Fsdpfxjw Em A No Aayspl - Electric power: 5 kW - Voltage: 400 V - Frequency: 50/60 Hz - Net weight: 62 kg

Year of construction: 2013, condition: used, rated frequency 120 MHz Power 60 kW voltage 14 kV current 12 A Hardening Unit - Induction | SAET - 3RALA equipped with a FANUC Robot M-6i B The machine is in very good condition. Please refer to further technical details in the attachement of the offer. Fjdpfx Asx Szmcoayopl - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 3 RALA |3-RALA

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) Fpjdpozqclhsfx Aayol

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3286502, overall weight: 5 kg, input voltage: 230 V, The DGYF 500C induction sealer is used for induction-electromagnetic sealing of aluminum caps under bottle caps. Key features: • Suitable for use with plastic or glass containers. • Very easy to operate. • Handheld device for small-scale applications. • Easy to transport; requires no dedicated workspace. • Packing speed of approximately 20-40 units/minute (depending on the operator and the product being sealed). • Maximum container diameter: 60-130 mm. • Maximum distance between the inductor and the container: 3 mm. • Activated by a switch on top of the inductor. Control panel: • On/Off switch. • Fuse. Fodoy S Rxhepfx Aayspl • Digital display indicating current intensity. • Digital display indicating time. • Overheat protection – the device automatically shuts down until it cools down. The induction sealer comes with sealing foil, 85 mm in diameter, 2 packs of approximately 400 pieces each.

Condition: excellent (used), LECTROTHERM AJAX TOCCO INDUCTION HEATING Power supply Inductron Inductotherm 330kw Fpedofhnwyspfx Aayjl

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum - copper - brass - Bronze Fjdpfxjlxnlfo Aayepl TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Transformer capacity: KVA 800 Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Fjdpfx Aaju Ur Rajyopl

Condition: used, functionality: fully functional, Agilent 7500 Series G3155A Inductively Coupled Plasma Mass Spectrometer. Fpjdpfxeuaxzio Aaysl The Agilent 7500 ICP/MS (Inductively Coupled Plasma Mass Spectrometer) is a cutting-edge analytical instrument known for its exceptional sensitivity and performance. With detection limits that go down to parts per trillion for most elements, the 7500 ICP/MS offers unparalleled sensitivity, enabling the accurate quantification of trace elements in various sample matrices. The instrument's wide dynamic range spans from sub-ppt to high ppm levels, accommodating diverse sample concentrations without compromising accuracy or precision. Capable of analyzing up to hundreds of samples per day, the 7500 ICP/MS provides rapid throughput, facilitating high-volume sample analysis in research, environmental monitoring, and industrial applications. Featuring robust interference removal capabilities and excellent stability, the instrument delivers highly accurate and precise quantitative results, ensuring confidence in analytical measurements. The Agilent 7500 ICP/MS is compatible with various sample introduction systems, including autosamplers and chromatographic interfaces, allowing for the analysis of complex sample matrices such as biological fluids, environmental samples, and geological materials. The Agilent 7500 ICP/MS is the instrument of choice for laboratories and research facilities requiring sensitive, fast, and quantifiable elemental analysis across a wide range of applications, including environmental monitoring, geochemistry, pharmaceutical analysis, and materials science. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Rated HP 400 RPM 1475 Volts 380 Phase 3 Freq 50 Code A Fodpfxsn Uwpfo Aayepl Amps 542 Frame 8188DZ Type K HP 460 Time Rating: Cont Rise: 90 Celsius by RES Drive end bearing AFBMA 80BC03 Front end bearing AFBMA 80BC03 Lubrication Grease GE Spec D6A2C5 Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2024, Complete Induction Hardening Facility – Hardening of Shafts, Pins, and Bushings For sale: a fully equipped induction hardening plant, ideal for hardening shafts, pins, and bushings. The machine is fitted with a cooling block and is ready for immediate operation! Technical specifications: - Generator power: 160 kW - Operating frequency: 10-25 kHz - Power supply: 3x400V / 50Hz - Maximum diameter of workpiece: up to Ø150 mm (upgradeable to Ø250 mm by changing the cooling ring) - Hardening depth: up to 6 mm - Maximum length of workpiece: 1250 mm - Cooling: Cooling block with a capacity of 100 l/min - Control: Digital and manual with parameter programming capability - Achievable hardness depending on steel grade: - C45 (structural steel): ~50-55 HRC - 42CrMo4 (alloy steel): ~55-60 HRC - Tool steels: ~60-64 HRC The machine is in excellent condition and ready for use! Inspection and on-site testing are available. Fsdpfx Aoyf Ak Ioayepl

Condition: excellent (used), Year of construction: 2014, compact and flexible induction power supply capacities 30kW, with an operating Fedpey A Ttvsfx Aayspl frequency range of 20kHz to 60kHz. Together with air cooler chiller 30kw and accessories

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Fpodozc Uu Hspfx Aayol

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Fpjdpozx S E Tefx Aayol Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Fedpfx Aozy Itvjayjpl

Year of construction: 2012, condition: new, Bircher Reglomat ProLoop2 dual-channel induction loop detector for vehicle detection. Designed for use with two induction loops in vehicle access and traffic-control systems. Suitable for industrial gates, automatic barriers, car parks, rising bollards and other access-control installations. The detector monitors induction loops installed in the ground and detects metallic vehicles. Technical details Manufacturer: Bircher Reglomat AG Country of manufacture: Switzerland Product type: Induction loop detector Model: PRLO2.R2.24ACDC Part number: 219954 Number of loops: 2 Outputs: 2 relay outputs Supply voltage: 24 V AC/DC Mounting: DIN rail Display with Mode and Data control buttons Fpodpszlimhjfx Aayel CE marked

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 150 mm/sec work speed 10.0 mm/sec return speed 140 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 110 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 15000 kg range L-W-H 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T- graphics/touchscreen * 2D graphic touchscreen programming operation * 3D display in simulation and production * 17" high-resolution color TFT screen * Bending sequence calculation * Product programming and display in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable Fedpfx Ajynnk Ejayjpl - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping Fpsdpfjlb I Dasx Aayol - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Fpjdpek Egrpofx Aayol Quick change holder SWH5-B set

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes Fedpfx Aoucgr Isayepl - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, sheet width 1600 mm plate thickness 15,0 mm ST pre-bending 13,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 4225 kg. dimensions of the machine ca. 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers Fsdpfxjxabkhj Aayepl - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 6.020 kg. dimensions of the machine ca. 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers Fsdpfx Aasxabm Aeyspl - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 16,0 mm ST pre-bending 20,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 15,0 kW weight of the machine ca. 13.200 kg. dimensions of the machine ca. 5542 x 2100 x 1983 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes Fedpfsxabzajx Aayopl - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes Fjdpexabflefx Aayopl - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 2600 mm plate thickness 10,0 mm pre-bending 8,0 mm diameter of upper rolls 230 mm side roll diameter 190 mm diameter of lower rolls 210 mm total power requirement 7,5 kW weight of the machine ca. 5.560 kg. range L-W-H 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine Fjdpfx Asxaalqjayopl - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 2100 mm plate thickness 8,0 mm ST Fpodpfx Asxab E Esayol pre-bending 6,0 mm ST diameter of upper rolls 190 mm side roll diameter 150 mm diameter of lower rolls 170 mm total power requirement 3,0 kW weight of the machine ca. 3.290 kg. dimensions of the machine ca. 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual