Used Ingersoll Face Mill for sale (67)

Condition: good (used), Year of construction: 2008, Ingersoll Rand screw compressor 110 Kw Itedpju Idnaefx Addsb Year 2008

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Iodpex Htfyofx Addotb Year of manufacture: 2017. Inspection under power possible.

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Itedjwric Ejpfx Addjb

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 573385, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table load: 1,000 kg, Die-sinking EDM machine with MultiChange IMC4 TECHNICAL DETAILS Travel X-axis: 525 mm Travel Y-axis: 400 mm Travel Z-axis: 450 mm Y-position electrode changer: 675 mm Drive: AC servo motors, digital Rapid traverse: 2 m/min Digital resolution: 0.001 mm Itedpfexwkttox Addeb C-axis: 1 - 20 rpm Load capacity with/without changer: 15 / 50 kg Worktable: 730 x 630 mm Load: max. 1,000 kg Dielectric tank: 400 l Filter surface area: 4 m² Lifting tank: 750 x 650 x 420 mm Dielectric height: 375 mm IMC 4 Electrode magazine: double magazine Number of electrodes: 182 Gripper: dual gripper Workpiece pallet magazine: 8 units Size per workpiece: 320 x 320 x 240 mm (alternative) MACHINE DETAILS Main dimensions: 2.2 x 2.15 x 2.54 m Weight, ready for operation: 4.8 t Connected load: 7 kVA IMC 4 Footprint: 2,800 x 4,101 mm Connected load: 11.6 kVA

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 655050, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel paths Travel X-axis: 550 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse (X/Y/Z): 60 m/min Spindle Speed: max. 42,000 rpm Tool system Tool holder: HSK 40 E Tool positions: 32 Table Table size: 650 mm × 500 mm Table load: max. 500 kg MACHINE DETAILS Itodpoxwc Hrjfx Addeb Drive power: 15 / 17 kW Control: Andronic 2060 Dimensions & weight Required space (L×W×H): 2.58 m × 1.9 m × 2.26 m Machine weight: 7,200 kg EQUIPMENT Measuring probe Electronic handwheel Erowa zero-point clamping system

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Itodexpvhajpfx Addeb Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 576409, OPS INGERSOLL GANTRY EAGLE 1200 Year of construction 2017 Iedpfewu Hb Rjx Addetb Machine No. 576409 Standard Specifications 1.01 Eagle Powertec PC/NC * Multiprog Powertec technology programming on PC/NC and as CD (external programming place) * Powertec Easy Burn high-speed programming * Powertec Handheld - multi-functional hand control device * Manual eroding with Powertec Handheld * Interfaces Ethernet and USB 　 * Multi-control light (remote maintenance via Internet), free of charge during the guarantee period 1.02 Eagle Powertec fine finish generator PT60 1.03 Eagle Power Jump with 18m/min interval speed in the Z-axis 1.04 Pressure flushing programmable, suction connection manually 1.05 Filter unit, 32m² paper filter 1.06 Compressor cooler 1.07 CO2 fire-extinguishing system 1.08 Color: Structural lacquer in cobalt-blue (RAL5013), grey (ral 7045), yellow (RAL1021) 1.09 Machine shoes Feature Specification XYZ travels 1 000 × 1 500 × 700 mm Tank size 1 270 × 1 770 × 680 mm Table size 1140 ×1640mm Table load capacity 7 500 kg Max head load 300 kg Rapid traverse 5 000 mm/min High-speed Z jump 18 000 mm/min (18 m/min) CNC Control Dual 32-bit PC, touchscreen, USB/Ethernet Generator (PT60) Adaptive current, 60 A Dielectric volume & filter 2 400 L, 32 m² filter Machine size & weight 2 950 × 3 950 × 3 440 mm, ~12 000 kg

Condition: used, Year of construction: 2014, operating hours: 80,000 h, functionality: fully functional, overall weight: 10,000 kg, power: 350 kW (475.87 HP), fuel type: electric, volume flow: 3,180 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, type of cooling: water, Equipment: documentation/manual, type plate available, Operational frequency-controlled turbo compressor up to 53,000 liters per minute Itjdpfx Adow N Hdyjdsb

Condition: good (used), Year of construction: 2008, Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from Ingersoll Rand – model TS3A, built in 2008. Technical specifications: Iedexl D Adopfx Addotb Max. air pressure: 12 bar (175 psig) Max. air inlet temperature: 60°C (140°F) Cooling system: Air-cooled Operating voltage: 400V / 3Ph / 50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant oil type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Find more items – new and used – in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2003, Diesinking / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 300 mm table size X: 550 mm table size Y: 470 mm max. workpiece weight: 500 kg Iodpowmn U Nofx Addetb electrode changer: 30 - time generator: 70 Ampere cooler HSJ technology (High Speed Jump) Mitsubishi control system - 64 bit CNC CO2 fire extinguishing system Integrated cartridge filter system Programming station software MultiProg Dielectric cooler

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 573251, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 730 mm, table length: 630 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel distances Travel distance X-axis: 525 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 450 mm Travel path for electrode change and loading position: 675 mm Traverse speed X, Y, Z: max. 2,000 mm/min Work table Support surface: 730 × 630 mm Load capacity: 1,000 kg T-slots: 5 Integrated C-axis Speed (adjustable): 1–20 rpm Measuring resolution: 0.001° Work tank Version: tank lift controlled Internal dimensions: 750 × 650 × 420 mm Maximum dielectric fluid height: 375 mm Programmable/automatic: yes Work head Max. head load: 100 kg Distance from tool carrier plate to work table min./max.: 135/585 mm Dielectric fluid supply Filtration system: 4 cartridges (integrated) Filter area: 2 m² Total volume of dielectric fluid: 400 l Itsdpfxoxniwrj Addob MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,500 x 1,500 x 2,500 mm Weight: 4,400 kg Weight: 200 kg Electrical data Connected load: 25 kVA Fusing: 25 A Operating voltage/frequency: 400/50 V/Hz EQUIPMENT 20-position electrode changer Automatic central lubrication Pick-up disc magazine CO₂ fire extinguishing system according to DIN 14497 Compressor cooler

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Iedpfswbf U Nex Addjtb

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Iedpfxju Axzko Addotb Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, input voltage: 400 V, power: 4.3 kW (5.85 HP), high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A connection: DN80 Ijdpfx Adorfyrpodotb machine dimensions: length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C IP classification IP 44 standard

Condition: used, Year of construction: 2019, High-speed milling machine OPS Ingersoll HighSpeed EAGLE V9, year 2019, featuring excellent equipment and an extensive range of accessories for sale. - Dynamic 5-axis high-speed milling machine with Heidenhain TNC 640, HSK50 spindle (Step-Tec) with up to 36,000 rpm Itodpfxjxu U Uve Addob - Excellent condition, currently only about 10,000 operating hours - Special features such as wet milling option for graphite electrodes (coolant filtration system) and pre-installation for automation with pallet changer - Extensive accessories including shrink fit machine (HAIMER), screw compressor (Atlas Copco), EROWA pallet UPC 320, T-slot table 520 x 520 mm, LANG clamping systems, shrink fit chucks, tools, workshop equipment, and workbenches (see accessories list)

Condition: excellent (used), Year of construction: 2013, operating hours: 18,254 h, functionality: fully functional, Screw compressor Ingersoll Rand R37IE-A. 37 kW, 7.5 bar with 6.46 m3/min. Itedpfsw H Nwlox Addob Year of manufacture: 2013.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Ijdpfevwa Nbox Addetb The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: excellent (used), fuel type: diesel, fuel: diesel, Year of construction: 1985, Flow capacity: 36 m3/h = Further information = Year of manufacture: 1985 Purpose: Construction Dimensions (L x W x H): 122 x 61 x 102 cm Compressor type: Piston Technical condition: Very good Visual condition: Very good Damage: None Serial number: 9482881 Itjdpfx Adowhynwsdjb

Condition: used, functionality: unexamined, Various used high-pressure pumps for sale individually or as a package Ingersoll/KMT – Type SL-IV50 / SLV50 / SLV50Plus UHDE – Type HP19/45S Itjdpjv I S Azefx Addjb FLOW – Type 12X For legal reasons, only available as a spare parts donor Viewing by appointment Price upon request

Condition: used, Year of construction: 1988, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,000 mm, table width: 2,000 mm, table length: 7,000 mm, overall weight: 180,000 kg, year of last overhaul: 2016, Table 7020x1810 mm Note portal width 2250 mm Travel paths: X=7387 mm Y=3070 mm Z=Support up to max without tool 920 mm + W 1000 Control: Heidenhain ITNC 530 Ijdswx Nltspfx Addstb Simultaneous: In X,Y,Z yes. In A,B,C with 1° Hirth gearing Spindle type: SK50 / Gearbox spindle Four attachment heads Internal spindle cooling: Yes Operating hours: 95475 h Spindle hours: 37984 h Modernization carried out: 2003 / Control and drives renewed

Condition: used, Year of construction: 2003, Ingersoll Rand ML45 air compressor (2003), 2 units available. Condition: Used, technically sound, currently disconnected. Manufacturer: Ingersoll Rand (USA) Model: ML45 Year of manufacture: 2003 Quantity: 2 units Reliable industrial screw compressors designed for the stable supply of compressed air across various industries – manufacturing, metalworking, pneumatic tools, and automation systems. Key technical specifications (according to Ingersoll Rand ML45 catalogue): Itodpfx Asxu Acheddjb - Rated power: 45 kW - Air delivery: approx. 7.5–8.5 m³/min (depending on pressure) - Working pressure: 7–10 bar - Compressor type: oil-lubricated screw - Drive: direct - Power supply: 400 V / 50 Hz - Cooling: air-cooled system - Noise level: approx. 72 dB(A) - Compressor weight: approx. 900 kg Condition description: Both units are currently disconnected but were operational prior to shutdown. Operating hour readings are unknown. Visually – in good technical condition, no damage.

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min Itsdpfx Adovwgmgedsb column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Wiring diagram no.: 107258 Errors, typos and prior sale excepted. Iodpew Ig A Hsfx Addjtb

Condition: used, Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, OPS Ingersoll OPS 550 – HSC Milling Machine (Year of Manufacture 2007) with Tool Changer & Extraction System Manufacturer: OPS Ingersoll Funkenerosion GmbH Model: OPS 550 Year of Manufacture: 2007 Machine No.: 655029 Made in Germany The OPS Ingersoll OPS 550 is a precise and powerful high-speed milling machine (HSC) designed to meet the highest demands in toolmaking, mold making, and precision component manufacturing. Featuring an integrated tool changer, a high-performance extraction system, and a user-friendly control unit, it provides optimal conditions for efficient and highly precise work. Equipment & Features Integrated tool changer with multiple tool positions Extraction system for clean operation OPS control unit with screen, keyboard, and emergency stop Precise HSC machining for fine contours and complex shapes Robust machine construction for lasting precision Technical Specifications Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 V DC Rated current: 63 A Power consumption: 55 A Isdpsw I Sm Dsfx Addetb Year of manufacture: 2007 Errors, typographical mistakes and prior sale excepted.

Condition: good (used), functionality: fully functional, Ingersoll Rand Nirvana 7.5kW screw compressor Overhauled equipment Can be seen operating at our premises Itedpfxjw Dqtie Addsb Price includes loading of equipment Transport and installation available at extra cost.