Spark EDM

INGERSOLL Center 400-2

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Gbedpfof Hmn Ajx Aansw Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE Gbedpfsyuqacex Aanjw CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Gbodpfxowwq Hce Aanow Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Gbjdezv D H Ropfx Aanew Max. machining diameter: 280 mm Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Condition: good (used), Year of construction: 2014, Cutting range examples: Gsdpfx Aaszrmk Rsnsbw at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 55 mm Shot weight: 434 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Platen dimensions : 795 x 795 mm Working hours: 25.969 h Type: Horizontal Drive: Hydraulic Equipment: 1x core puller Gjdpfx Aox Ir Ngeanjbw Euromap 67

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Fanuc 31i control X 500mm Y 400mm Z 330mm Gedpezrkycofx Aanjbw Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, total height: 2,700 mm, total length: 3,800 mm, total width: 2,350 mm, table width: 500 mm, table length: 750 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, Equipment: chip conveyor, documentation/manual, For sale: AXA DBZ milling machine - 2014 Heidenhain iTNC 530 HSC control 2 machining areas of 750x500 5-axis rotary table on one table (continuous) Godsy D Enhopfx Aansbw 22-tool magazine, SK40 Optical scales on all axes Mist extractor Chip conveyor High-pressure pump External coolant filtration unit Machine in good working order, under power = can be tested 3-month warranty Installation and commissioning at the customer's site possible Suitable for pendulum machining (machining on one table, loading on the other).

Condition: excellent (used), Hurco VMX50i (2014) 3-Axis Vertical Machining Centre Control: Hurco WinMax Gbodjyx H Rtopfx Aanjw Travels & Capacity X Axis Travel: 1270 mm Y Axis Travel: 660 mm Z Axis Travel: 610 mm Table Size: 1500 x 660 mm Max Table Load: 2000 kg

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. Gbjdpfx Aajx Imrponjw • Spindle-to-table distance: 127–889 mm • Table • Dimensions: 2,134 × 711 mm • T-slots: 5 • T-slot width: 125 mm • Max workpiece weight: 1,814 kg • Spindle • Tool holder taper: CT 50 • Tool magazine • Tool capacity: 30 + 1