Used Injector for sale (137)

Condition: excellent (used), Thermo Finnigan Type: Thermo Finnigan Trace MS 2160 / Thermo Finnigan DSQ II Thermo Finnigan mass spectrometer Thermo Finnigan GC/MS system Trace MS 2160 with Thermo Finnigan DSQ II Description: Mass spectrometer Mass range up to m/z 1050 Gsdpfx Adjvyd S Ssboip Ionization methods: EI, (CI) Quadrupole separation system Automatic sample changer Data system: Xcalibur with NIST spectra library Split/splitless injector and PTV injector Direct sample inlet via push rod Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Nozzles, injectors, diesel engine nozzles -Type: 214 5079 Quantity: 10 pieces available Price: per piece Godpfx Adjb A Hx Dobsip -Weight: 0.4 kg

Condition: used, machine/vehicle number: 008406, Max. panel width: 1000 mm Gisdpfx Adoyl Ihxjbjp Max. panel length: 2500 mm No of injectors: 12

Condition: used, mileage: 167,240 km, power: 120 kW (163.15 HP), first registration: 10/2014, fuel type: diesel, number of seats: 17, gearing type: automatic, emission class: euro6, color: blue, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1039 * MB Sprinter 516 Gedpfx Asxc Sfzodboip * ORIGINAL EVOBUS - TRAVEL 65 * 120 kW / 160 HP – EURO 6 * Automatic transmission * LOW MILEAGE * TELMA retarder * Cruise control * Luggage compartment * Panoramic glazing * 15+1+1 passenger seats: LUX line seating * ALL SEATS EQUIPPED WITH 3-POINT SEAT BELTS * Adjustable seats (recline function) * Passenger compartment air conditioning * Separate driver’s climate control * Armrests * Tables with cup holders * Footrests * Luggage nets * Convector heating * Auxiliary heater * Parking heater * Reversing camera * One table installed * Overhead luggage racks * Reading lights * New windscreen * Large luggage compartment * Power outlet in the bus * Refrigerator * Repairs in January 2026: * New injectors for AdBlue * Propshaft renewed * etc. * All information without guarantee * Interim sale reserved * Please refer to our Terms and Conditions

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW Giodpfx Aoyap Icsdbsp - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Condition: excellent (used), mileage: 999,990 km, first registration: 08/1997, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 620 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1997, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and equipment = - 2 bunks - 600-liter diesel tank - Heated exterior mirrors - Comfort driver's seat - Roof spoiler - Speed limiter Gsdpex H Sr Ssfx Adboip - Radio/CD player - Sleeper cab - Sun visor - ZF16 manual transmission = Notes = GOOD CONDITION DAF FT95-380XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX, ROOF SPOILER & AIR CONDITIONING!! 380HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! 620-LITER DIESEL TANK!! AIR CONDITIONING!! SPOILER ON CABIN!! ETC!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR THE HEAVY JOBS!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!!

Condition: used, Year of construction: 2017, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 800 mm, feed length Z-axis: 45 mm, drilling depth: 45 mm, type of input current: three-phase, compressed air connection: 7 bar, input voltage: 400 V, workpiece height (max.): 45 mm, operating pressure: 7 bar, input frequency: 50 Hz, input current: 10 A, The KOCH SPRINT-PTP Basic is a high-precision CNC point-to-point drilling and dowel insertion machine designed for efficient production in furniture and cabinet manufacturing. Built in 2017 by the renowned German manufacturer KOCH Maschinenfabrik, this machine ensures reliable and accurate drilling, gluing, and dowel insertion operations. It is ideal for small to medium-sized woodworking companies looking to automate and increase productivity in carcass and panel production. The machine features a horizontal drilling unit with dowel vibration system, glue injector, and four horizontal clamps with central zero positioning for precise workpiece alignment. The mechanical Z-axis readout allows accurate depth control. Equipped with a 15” screen and Windows (7) -based control system, the machine offers user-friendly operation and easy programming. Technical Data Working range X-axis: 20 – 1200 mm Working range Y-axis: 110 – 800 mm Working range Z-axis: 14 – 45 mm Power: 5 kW Voltage: 400 V Frequency: 50 Hz Max. current: 10 A Compressed air requirement: max. 7 bar Gisdpeylhkaefx Adbjp Year of manufacture: 2017 The machine is in good working condition.

Condition: used, mileage: 239,000 km, power: 120 kW (163.15 HP), first registration: 05/2011, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2027, color: black, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,910 mm, total width: 1,993 mm, total height: 2,435 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * VW Crafter 35 panel van L2 H1 with 3 seats - tow bar - 3 seats - immediately available - * Diesel - Engine capacity: 2,461 cc - 120 kW / 163 hp - Euro 5 - Green emissions sticker * 6-speed manual transmission - Wheelbase: 3,665 mm - Load compartment with wooden lining & carpet * All 5 injectors replaced NEW at 223,000 km, turbocharger NEW at 220,000 km, rear brake pads NEW at 236,000 km, front axle brakes completely NEW at 230,000 km * German vehicle - German registration documents - * Vehicle immediately available and ready for pick-up - * Please arrange an appointment for viewing - * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not constitute guaranteed features. Gjdjxpb Dajpfx Adbjip * The seller is not liable for typographical or data transmission errors. * Subject to change, errors, and prior sale. Special equipment: Audio system RCD 2001, outside temperature display, wooden flooring in the cargo area, spare wheel in operational condition, double passenger seat in driver's cab, high-grade wooden trim in cargo/body area Further features: Storage trays/compartments above windscreen, driver's airbag, traction control (ASR), rear right entry handle on rear pillar, driver assistance system: brake assist (HBA), rear wing doors without glazing, body/chassis: standard panel van, body variant: standard roof, fuel tank: 75 liters, high cargo partition wall without window, engine 2.5 L - 120 kW TDI DPF, parking light switch, wheelbase 3,665 mm, low emissions according to Euro 5, right sliding door in cargo/passenger area, seat cover/upholstery: fabric, driver's seat height-adjustable, front stabilizer, permissible total weight 3.5 t, additional brake light

Condition: used, mileage: 1,022,720 km, first registration: 03/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, According to our "General Terms and Conditions of Sale" and subject to change without notice, we can offer you the following vehicle as available today, with no warranty or guarantee of any kind, and subject to prior sale, errors, or typos: Mercedes Benz 2545 Interchangeable Chassis (Vehicle 886) First registration: 27.03.2015 1,022,720 km Engine: 12,809 cc 330 kW / 450 HP Euro 6 Diesel Roof spoiler, sun visor A-sign + folding hazardous goods sign LED daytime running lights Additional headlights Full air suspension Gjdpfsx Sa Uxjx Adbsip Tyres: 315/70R22.5 1st axle approx. 30/40%, 2nd axle steer axle approx. 90/90%, drive axle approx. 90/90%, 3rd axle approx. 70/70% Multi-lift system for standard and large swap bodies Spier body 2 x trailer couplings (1 x standard + 1 x low) (no trailer included) Long-distance cab with 1 bed Automatic climate control, auxiliary heater Fully automatic transmission Multifunction steering wheel 2 x electric windows, mirrors, heated mirrors Manual roof hatch Radio/CD/two-way radio Central locking with remote control Refrigerator 2 x chocks Plastic storage box (closed, passenger side, center) 1 x LED work light at rear Folding A-sign and hazardous goods sign No trailer included New injectors and oil pump replaced in 04/2024 Price: €14,000.00 (net) All information provided without guarantee or warranty. Our “General Terms and Conditions of Sale” apply. The court of jurisdiction for both parties up to a value in dispute of €5,000.00 is the Local Court of Ludwigslust; for higher values in dispute, the Regional Court of Schwerin. Subject to change, errors, and prior sale.

Condition: used, machine/vehicle number: 007870, Max. panel width: 3200 mm Max. panel length: 800 mm No of Bottom Units: 2 Giedpfx Aowimz Hedbop No of injectors: 12

Condition: used, machine/vehicle number: 005448, Max. panel width: 3000 mm Max. panel length: 1350 mm Giodewcydzspfx Adbsp No of injectors: 24

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm No of injectors: 14 Gjdpfsiwptuox Adbeip Positioning of Units by NC: yes

Condition: new, AutoClean Ultrasonic Celaning System AutoClean ultrasonic cleaning systems, specifically designed for the high and precision cleaning demands of transportation industries such as the aviation, naval, railway and even the engine remanufacturing and repair industries. The AutoClean range has been designed with engine components in mind, cleaning all types of parts from cylinder heads, injectors, engine blocks, brake discs, gearboxes and radiators could all benefit. The AutoClean’s cleaning ability is 16 times more effective than conventional hand washing and with the use of ultrasonic cleaning power this enables you to reach the smallest holes and compartments effectively, meaning cleaning those hard to reach places has never been easier. Tank capacities between 200 to 9,000 litres. 28kHz standard ultrasonic frequency. 40kHz with sweep generator option available. - Constructed entirely of stainless steel (AISI 304). - Tank construction available in AISI 316L or AISI 316Ti. - Automatic shut of heaters at low water level. - Available with vacuum drying option. - Adjustment of the cleaning time & water temperature. - Tailor made design with a large range of optional extras. Gedpjd Hdvdsfx Adbjip

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment Gijdpeyk Empjfx Adbop • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: used, mileage: 782,291 km, power: 228 kW (309.99 HP), first registration: 02/2008, fuel type: diesel, number of seats: 61, gearing type: automatic, emission class: euro4, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, +++New water pump+++ +++New thermostat+++ +++New injectors & hydraulic pump+++ General Engine: MAN Emission standard: EURO 4 Total seats: 61 Seats: 56+4+1 high/fixed with lap and 3-point belts Standing places: 69 Transmission: Automatic Safety * Retarder * ABS, ASR, EBS * Fog lights Passenger compartment * Auxiliary heater * Air conditioning * Driver's microphone * Pram space * Wheelchair ramp * Wheelchair space * Stop request button Audio, Communication, Electronics * Radio, CD Exterior * Gorba destination display/matrix * Number of double-width doors: 3 * Lift/lowering system * Power steering * Digital tachograph card * Sun visor * Roof hatches Godpfx Aox Eplmodboip * Roof fans * Roof ventilators Miscellaneous * German registration document * Twin tires * Vehicle length: 18.00 m * Vehicle width: 2.50 m * Vehicle height: 3.00 m * Front axle tires approx. 80% * Middle axle tires approx. 70% * Rear axle tires approx. 90% Our internal vehicle number: 12080 Errors excepted. Pictures and text may differ from the actual vehicle. Always over 300 vehicles available.

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors Gedoxzb Iispfx Adboip • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: good (used), mileage: 999,500 km, power: 265 kW (360.30 HP), first registration: 09/1997, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 600 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1997, Equipment: ABS, cruise control, differential lock, = More options and accessories = - 600 liter diesel tank - Heated exterior mirrors - Driver’s comfort seat - Differential lock - Speed limiter - Radio/CD player - Rotating beacons - Sleeper cab - Sun visor - ZF16 manual gearbox = Notes = GOOD CONDITION DAF FT95-360 ATI SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX (FORMER DUTCH REGISTRATION (BF-JT-56)!! 360HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! 600 LITER DIESEL TANK!! ETC!! PERFECT FOR COLLECTORS, TRUCK IS IN GOOD RUNNING CONDITION, READY FOR WORK!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS AVAILABLE)!! SHIPMENT, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US; WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR YOUR FIRST IMPRESSION!! () Gedpfx Ajuy I Iusdboip YOU CAN ALSO VISIT OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical Information Number of cylinders: 6 Engine displacement: 11,600 cc Transmission Gearbox: ZF16 manual gearbox, 16 gears, manual transmission Axle configuration Tyre size: 295/80R22.5 Brakes: Drum brakes Front axle: Max. axle load: 7,500 kg; Steering; Tyre tread left: 20%; Tyre tread right: 20%; Suspension: leaf suspension Rear axle: Dual wheels; Differential lock; Max axle load: 11,500 kg; Inner left tyre tread: 10%; Outer left tyre tread: 10%; Inner right tyre tread: 10%; Outer right tyre tread: 10%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 6,960 kg Payload: 12,040 kg Gross vehicle weight: 19,000 kg Functional Superstructure brand: ZF Condition Technical condition: very good Visual condition: average Identification Registration: BF-JT-56 Further information Please contact the Sales Department or Erik Engel for more information.

Condition: good (used), mileage: 1,170,000 km, first registration: 05/1999, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 870 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1999, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and equipment = - 2 bunks (sleeping berths) - 870 liter fuel tank - Aluminum fuel tank - Heated exterior mirrors - Power brake booster - Comfort driver's seat - Roof spoiler - Differential lock - High beam headlights - Speed limiter - Sleeper cab - Sun visor - ZF16 manual gearbox Gsdjuy Ixtspfx Adboip = Remarks = GOOD CONDITION DAF FT95-380XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX, ROOF SPOILER & AIR CONDITIONING!! 380HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! D.E.B ENGINE BRAKE!! 870 LITER DIESEL TANK!! AIR CONDITIONING!! SPOILER ON CAB!! ETC!! TRUCK IS IN GOOD RUNNING CONDITION, READY FOR HEAVY-DUTY JOBS!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,580 cc Transmission Transmission: ZF16 manual gearbox, 16 speeds, manual transmission Axle configuration Tyre size: 315/80R22.5 Brakes: Drum brakes Front axle: Max. axle load: 7,500 kg; Steering; Tyre tread left: 30%; Tyre tread right: 30%; Suspension: leaf springs Rear axle: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Inner left tyre tread: 20%; Outer left tyre tread: 20%; Inner right tyre tread: 20%; Outer right tyre tread: 20%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,620 kg Payload: 11,380 kg Gross vehicle weight: 19,000 kg Functional Cargo compartment capacity: 870 l Brand of superstructure: ZF Condition Technical condition: good Visual condition: good Identification Registration number: BH-SN-04 Further information Please contact Sales Department or Erik Engel for more information.

Condition: ready for operation (used), functionality: fully functional, GEA CFS Yieldjector 650 The GEA CFS Yieldjector 650 injector is designed for industrial processing facilities seeking precise, consistent, and controlled brine injection. It is suitable for both bone-in and boneless products, enabling efficient processing of poultry, pork, beef, and fish. Its homogeneous distribution system ensures that the brine penetrates the muscle uniformly, stabilizing product texture and improving cooking yield. The high-density needle pattern guarantees complete coverage of the product, even on flat or delicate cuts. The machine operates using an incremental step-by-step process: the product advances on a conveyor, stops under the injection head, and then the injection takes place with high precision. Each needle is equipped with an independent retraction mechanism. This means if a needle encounters a bone, it retracts instantly and stops the injection, preventing brine pockets and preserving muscle integrity. This technology minimizes product losses and delivers consistent results, cycle after cycle. Additionally, automated control via a touchscreen interface simplifies adjustments, making recipe reproducibility straightforward. The GEA CFS Yieldjector directly increases line profitability. Precise injection reduces weight variations, narrows batch-to-batch differences, and achieves injection rates up to 80%, depending on product type. Integrated cleaning systems simplify maintenance, reduce downtime, and help maintain high throughput. As a result, this machine is an ideal solution for production sites where precision, hygiene, and consistent performance are daily priorities. Gjdpsxry Txofx Adbjip Technical specifications: Dimensions: 2110 x 1790 x 2511 mm Belt width: 450 / 650 mm Capacity: 1,000 to 12,000 kg/h Power: 12.5 kW Number of needles: 504 / 728 Max product height: 100 mm

Condition: reconditioned (used), Year of construction: 1997, machine/vehicle number: 06143797, Schröder 61 Needle injector Gjdpforw Araox Adbjip Year of construction 1997 Suitable for meat with bone and fresh meat 60 cycles per minute with 40mm advance per stroke Hourly capacity 3000 KG

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Giodpfx Aev Syvqjdbsp Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Blasting principle: Injector principle (suction blasting) Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Viewing window: Safety glass with replaceable protective film Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Compact design – ideal for workshops and laboratories Quiet operation thanks to sound insulation Easy to maintain and durable

Condition: good (used), Year of construction: 2000, functionality: fully functional, Offered is a brine injector Günther PI-17 needle, year of manufacture 2000. In good condition, 380V, 16A. Further details on request. Cash payment or advance payment. Sale to commercial customers only. No warranty, no liability. Gedpfx Adjw R Tv Seboip

Condition: good (used), functionality: fully functional, Offered is a Günther PI-17 needle pickling injector. The impeller is new, as is the pressure gauge. 380V, 16A. Further details upon request. Cash payment or advance payment. Sale to businesses only. No guarantee or warranty. Godpfx Ajv Saflsdbsip

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 Gisdpfxjxm Rwqj Adbop 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Giodpsyfim Ajfx Adbop Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅