Used Plastic Injection for sale (6,709)

Condition: ready for operation (used), Andouart extruder Gedpfxjx Engpj Ab Usuk

Condition: good (used), Year of construction: 2006, operating hours: 58,401 h, machine/vehicle number: 61007671, Technical details Clamping force: 4200 kN Size of mould platens (H x V): 800 mm x 800 mm Mould opening stroke: 1020 mm Minimum mould height: 380 mm Maximum mould height: 1400 mm Max daylight: 1380 mm Hydraulic ejector – stroke: 250 mm Ejector force forward/backward: 95 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Stroke volume: 1433 ccm Gedexzdqaspfx Ab Ujuk Shot weight PS: 513 g Screw speed: 218 1/min Maximum plasticising rate: 108 g/sec

Condition: ready for operation (used), Extruder + electric cabinet output: 200 kg Heads not included Gedpfxsx Dd Hme Ab Usuk Winder not included

Condition: repair required (used), Year of construction: 2003, functionality: not functional, It is a complete line for film recycling. It was bought together as complete line. Components Gujdox Ddchopfx Ab Ujk • Shredder TRI TUR TM 3 model with hydraulic drive and 75 kW motor. • Pre-washing tank for contaminated film. Bottom sludge discharge. Made of stainless steel! • Water grinder L5 650/1000 10 rotating and 4 stationary knives • Centrifuge Mainly available as a single item! Used, in good condition, has not been in operation for a long time, requires repair. The grinder is currently in operation and can be viewed in Dunaújváros(Hungary)

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Gjdporl Rv Tjfx Ab Uouk Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Power supply 220 V mono 50 Hz Weight : 25 kg

Condition: used, Plastic sheets, plastic laminate -different sizes -Thickness: 6mm -Outdoor outdoor area: can be used -on: 2 pallets Gsdsb A Nwpjpfx Ab Ujuk -Sale: only complete -Dimensions: 1450/3100/H340 mm -Weight: 720 kg

Condition: used, range L-W-H 490x310x190 mm weight max. in kg 20 kg Temperature range -10°+50° °C Colour grün RAL material PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx Guodpfshr Ex Hex Ab Uek ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc Gsdpfewx E Nbsx Ab Usuk - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote.

Condition: excellent (used), Year of construction: 2002, MECA PLASTIC MECA ID.NO. 2620 Meca Plastic mod Meca tray sealer with 2x tools Vacuum / Gas machine. Busch 160 cc vacuum pump year mod 2002 very nice condition! Tools 1. 255 x 255 mm Guedoqu Tw Hjpfx Ab Uok Tool 2. 320 x 255 mm. Dimensions 430 x 115 cm H 160 cm.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: ZSK27mV, The following elements and quantities are available for sale: 4x conveyor element/conveying element 22/11 – 8027-05.21-022/011-24 Gjdpfxjvytdks Ab Ujuk 10x conveyor element/conveying element 22/22 – 8027-05.21-022/022-24 6x conveyor element/conveying element 22/33 – 8027-05.21-022/033-24 6x conveyor element/conveying element 33/16.5 – 8027-05.21-033/00165-24 10x conveyor element/conveying element 33/33 – 8027-05.21-033/033-24 10x conveyor element/conveying element 44/22 – 8027-05.21-044/022-24 10x conveyor element/conveying element 55/27.5 – 8027-05.21-055/027.5-24 10x kneading block/kneading element KB30/7/22 SAM – 8027-05.27-307/022-27 12x kneading block/kneading element KB30/5/11 – 8027-05.26-305 / 011-24 12x kneading block/kneading element KB30/5/22 – 8027-05.26-305 / 022-24 6x Mixing elements SME 22/22 – 8027-05.92-388/022-64 Material: 1.2379 - X153CrMoV12 (CPPU) Available immediately.

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, 5 units: • Gravimetric screw dosing system • Feed hopper with pneumatic rotary flap, each with a lid • Screw conveyor from the big bag feeder with height-adjustable individual frame Gjdot S Rduspfx Ab Ueuk 1 unit: • Trough screw for merging and conveying the dosing materials into a transfer container. 5 units: • Big bag feed station, with suspension beam that prevents the big bag from collapsing during emptying. • Big bag plate base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control Delivery EXW English Translation: 5 pieces: • Gravimetric screw dosing • Feed hopper with pneumatic rotary flap, each with a lid • Screw conveyor from Big Bag feeding with height-adjustable individual frame 1 piece: • Trough screw conveyor for merging and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension traverse to prevent the Big Bag from folding during emptying • Big Bag bottom plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Condition: not inspected (used), Tank, Plastic Tank, Liquid Storage, Liquid Tank, Used Machine Overall dimensions: Height 2500 mm Diameter 2000 mm Tank Capacity: 6 m3 Material: PE (Polyethylene) Guedpfx Asra Dahob Usk Manhole Diameter: 580 mm Liquid Drain, Filling Pipe Diameter: 100 mm There is no liquid level indicator, and we have not conducted a leak test on the tank. There are several pieces

Condition: like new (used), functionality: fully functional, Year of construction: 2020, automatic line for production of disposable textile rusks. Full Automatic Mask Machine - production line for medical plastic masks capacity 90 - 100 pcs per 1 minute For more information and videos of the machine please contact us. Guedpfx Abjqvl Uas Ujk

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with Gsdpfx Abjuqwzwo Ujuk a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: ZE60R, Sell spare parts for ZE60R twin-screw extruder. IMMEDIATELY AVAILABLE!!! The following screw elements are available immediately: 2 pcs. ERZ-45/1/2 Gedpfeqwdtdex Ab Usuk 4 pcs. ERZ-60/0,5/2R 2 pcs. ERZ-60/1/2 2 pcs. ERZ-75/1/2 4 pcs. ERZ-KB75/5/60L 2 pcs. ERZ-KB75/5/90 Material version: Z9 Price on request!

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Gsdehx Elfspfx Ab Usuk Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: new, Year of construction: 2025, functionality: fully functional, Drying Centrifuge Model ERFOR® CR8 Component device for recycling washing lines ♻️ ♻️ ♻️ The machine is designed for drying plastics—both soft and hard—including: films such as LLDPE, LDPE, HDPE, PP, PVC, PS, PA, post-agricultural films, agro-fibre, shredded big bags, PP sacks, fishing nets, peat packaging, and many more. Drying centrifuges Model - CR8 55/75 Motor power [kW] - 55/75 kW Film drying capacity [kg/h] - 1500/2000 Dimensions (L*W*H) (mm): 1970*2800*2060 / 2100*3150*1900 Ground material drying capacity [kg/h] - 5000 Gujdpjuql Rtefx Ab Ujk Our offer also includes: Complete plastic recycling systems DWFS® washing lines Granulation and extrusion lines For more information, please visit our website.

Year of construction: 2024, condition: new, functionality: fully functional, We are a manufacturer of complete technological lines for washing and granulating plastics. Godpfx Abeuqu Uhj Ueuk We also offer individual devices such as centrifuges, washers, screw presses, and flotation tanks. A high-performance plastic washing and granulation line, engineered for processing a wide range of materials including PE, PP, HDPE, LDPE, LLDPE, PS, and ABS. This comprehensive recycling solution efficiently manages cleaning, drying, and granulation processes, ensuring the production of high-quality recycled material. Each line is custom-designed to meet the specific requirements of our clients, with throughput capacities ranging from 300 kg/h up to 2,500 kg/h, providing the ideal solution for operations of any size. The system is built for long-term durability and user-friendly operation, making it suitable for both small and large-scale recycling plants. Advanced technologies maximize productivity, reduce energy consumption, and ensure consistent results, delivering a reliable and cost-effective solution to enhance plastic recycling efficiency. Please contact us for inquiries and quotations. Erfor.pl

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. Guedpfxovmxvfo Ab Ujk The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. Gusdpfeuqmavex Ab Ujk The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h Godox Af S Uepfx Ab Usuk FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Gjdpfsx A Df Tex Ab Uouk Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h Guedox A Dbbepfx Ab Usk EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Gjdpfx Abjx A A S Es Ueuk Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Gjdpfx Ajx A A E Ejb Usuk Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller