Used Jointer Thicknesser for sale (328)

Condition: as good as new (ex-display), Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Hfodpsvwflnefx Ab Uer

Condition: used, Year of construction: 2009, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, planing width: 310 mm, total length of planing tables: 1,500 mm, total width: 2,120 mm, total length: 2,600 mm, total height: 1,300 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, overall weight: 900 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: scorer, No. 04501 5-fold combined machine Felder CF 531 Used, year of construction 2009, very good condition Circular saw tiltable - table router tiltable - surface planer / thickness planer - preparation for long hole drilling support / long hole drilling device Circular saw Motor power 3 kW Scoring unit Sliding table 2500 mm long Manual saw blade tilting 90° - 45° Saw blade diameter 250 - 315 mm Spindle diameter 30 mm Cutting height max. 102 mm Cutting width approx. 800 mm Outrigger table with telescopic cross-cut fence Pivoting cross-cut fence with degree scale Moulder Motor power 3 kW Moulder table opening diameter 180 mm Maximum cutter diameter 300 mm Spindle diameter 30 mm Manual spindle swivel 90° - 45° Speed 3000 / 6000 / 8000 / 10000 rpm Planer Motor power 3 kW 4-knife planer shaft Planer Table length 1500 mm Hfedpfx Aoxzk Thjb Uor Planer Table width 310 mm Chip removal max. 5 mm Parallel fence pivotable 0° - 45° Thicknesser Table length 540 mm Thicknesser width 306 mm Thicknesser height 4 - 220 mm Switchable feed rate 6 m/min Preparation for long hole drilling support / long hole drilling device With travel device and handlebar Machine CE-compliant, GS-tested Technical documentation available as .pdf file Transport dimensions approx. 2600 x 2120 x 1300 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg Hfodpfx Asqv Aivjb Ujr ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and Technical Data: - 4-knife cutterhead - Motor power: 3 kW - Spindle speed: 5,000 rpm - Spindle diameter: 120 mm - Feed speed: 8 + 14 m/min - Maximum planing height: 230 mm - Extraction port: Ø 150 mm - Planing table: two-piece, foldable, synchronized on both sides - Planing fence: tiltable, with inclination shown via magnifier display - Table height adjustment: via double universal joints, handwheel with scale display - Thickness planer: with outfeed roller, spring-loaded, feed rollers driven synchronously Dimensions: 2,040 × 1,180 mm Weight: 560 kg Availability: short-term Hfjdjxzl Adepfx Ab Uer Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 Maximum passage thickness of thickness planer: 250 mm Height adjustment of thicknessing table: electric Planer thickness display: digital display Feed speed: 6/12 m/min Infeed roller: Steel Hfsdpfx Ajl D Rwtsb Usr Pull-out roller: steel Table rollers: no Motor power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Machine width: 882 mm weight: 615 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Hfedpfsxz Thbsx Ab Uer Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 5″ colour touch screen Positioning of the automatic worktop with touch or manual controls Automatic return to the initial position Feed rate from 4 to 25 Mt/min. Diagnostics of the machine directly on the touch screen Thicknesser of work from 3 to 300 mm Thicknessing width max 530mm Maximum thickness of material removal 12 mm Minimum workpiece length :285 mm Motor standard Kw 5.5 ( Hp 7,5 ) Revolutions of planer shaft rotation : 5000 r/min. Suction connection with a diameter of 160 mm Machine weight 1000 kg. Hjdpfx Asw Rfqnsb Usfr

Condition: excellent (used), functionality: fully functional, Casolin FSC 430 Surface Planer/Thicknesser Working width: 410 mm Thickness planing working height: 220 mm Two feed speeds for thicknessing: 6-12 m/min 4-knife cutterhead Cutterhead with traditional knives Motor power: 4 kW Planer table length: 2080 mm Hedpfx Absx A S Suo Ujfr Mortising and drilling unit

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm - brake - cast iron tables - both tables adjustable - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft – brake – upper control panel – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Hjdoxdakuepfx Ab Uofr Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a used Format4 jointer-planer machine with a jointer length of 2250 mm. The machine has been inspected by our specialist staff and is in as-new condition. Technical data: Jointer/planer width 510 mm Hfedpfx Abjwnd T Rs Uer DUAL foldable jointer tables Silent Power cutterblock Planing height 4-250 mm Variable feed rate 4-16 m/min 10 HP (7.35 kW) motor Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, planer, thickness planer, jointer, planer Reference: R-A0117

Condition: new, Year of construction: 2025, Working width: 410 mm Cutterhead: spiral cutterhead Number of knives: 66 Jointer table length: 2020 mm Jointer fence angle adjustable: yes, 45° to 90° Hjdpfxexzfwho Ab Uofr Maximum planing thickness (thickness planer): 230 mm Thickness table height adjustment: electric Planing thickness display: digital readout Feed speed: 5.5 / 10 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 5.3 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 2020 mm Machine width: 882 mm Weight: 480 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Hjdpfxjxqh E Ho Ab Ujfr Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations) Hfsdpfx Abonabqzj Uor

Condition: used, Year of construction: 2022, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Dressing table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 maximum passage thickness thickness planer: 250 mm height adjustment thicknessing table: electric display of planing thickness: mechanical digital display Hfodpfegqwxujx Ab Ujr Feeding speed: 6 m/min Feed roller: steel Extraction roller: steel table rollers: no Engine power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Machine width: 882 mm Weight: 615kg

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down Hfjdpfow Ipcvsx Ab Uer 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment Hfodpfx Abolhrk Sj Uor - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW Hfjdpfjw Ipicox Ab Ujr - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft Hedpfx Ajv Nhgxeb Uofr – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7802 TECHNICAL DATA - Shaft width: 410 mm - Table length: 2560 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 2.2 kW - Shaft guard - Extraction port diameter: 150 mm Hfjdsxr Dgcepfx Ab Ujr - Dimensions (L/W/H): 2560x700x1170 mm - Weight: 695 kg ADVANTAGES – German manufacture – Used jointer – In very good condition Net price: 6,500 PLN Net price: 1,550 EUR depending on the exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7571 Technical specifications: - Roller width: 510 mm - Table length: 3040 mm - Noise reduction comb - Roller guard - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence with angle setting - Motor: 3 kW - Extraction port diameter: 130 mm - Dimensions (L/W/H): 3040x850x1000 mm - Weight: 1032 kg ADVANTAGES – German-made – Possibility to mount profile knives – Long tables Hfjdpfx Asv H Dugob Uer – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7568 Technical Data: - Shaft width: 510 mm - Shaft guard - Sound dampening comb - Number of knives: 4 pcs Hjdpfxov H Dapo Ab Uefr - Table length: 2940 mm - Cast iron tables - Both tables adjustable - Original adjustable angle fence - Motor: 5.5 kW - Extraction nozzle diameter: 140 mm - Dimensions (L/W/H): 2940x950x1240 mm - Weight: 1330 kg ADVANTAGES – Polish production – Top control panel – Four-knife shaft – Used jointer – Very good condition Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 EUR rate) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7590 Technical specifications: - Shaft width: 500 mm - 3-knife shaft - Shaft guard - Table length: 2360 mm - Cast iron tables - Both tables adjustable - Cast iron fence adjustable at an angle - Motor approx. 3 kW - Dimensions (L/W/H): 2360x1000x1000 mm - Weight: 630 kg Advantages: – Italian production – Used jointer – Intended for professional use Net price: 6900 PLN Net price: 1640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Hsdpfsv Nhpmjx Ab Usfr

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: Hfodpfxehv Shzs Ab Uer - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7835 Hedex Armxjpfx Ab Ujfr TECHNICAL DATA - Shaft width: 410 mm - Noise-dampening comb - Number of knives: 4 pcs - Table length: 2500 mm - Cast iron tables - Both tables adjustable - Original angle-adjustable guide fence - Motor: 4 kW - Electric brake - Extraction port diameter: 125 mm - Dimensions (L/W/H): 2500x820x1210 mm - Weight: 910 kg ADVANTAGES – Made in Poland – Top control panel – 4-knife cutter block – Used jointer – Very good condition Net price: 15,900 PLN Net price: 3,790 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), Catalogue number 7211 TECHNICAL DATA JOINTER: - shaft width: 400 mm - 3-knife cutter block - table length: 2000 mm Hfodpoqwy Dtsfx Ab Uor - fence THICKNESSER: - max workpiece thickness: 140 mm - thicknesser shaft guard from above: – anti-kickback fingers – grooved feed roller – cutter block – smooth outfeed roller DRILLING MACHINE: - max tool diameter: 16 mm - max drilling depth: 170 mm - max drilling width: 200 mm - adjustable table (up/down, forward/backward, sideways) - table dimensions: 560 x 270 mm - material hold-down CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade arbor diameter: 30 mm - blade adjustable up/down - cutting width with fence: 120 mm - table dimensions: 1010 x 550 mm - with table-mounted sliding carriage - motor: 2.2 kW - dimensions (L/W/H): 2000 x 2340 x 1200 mm - weight: 895 kg ADVANTAGES – Made in Italy – Very good condition – Used multifunctional machine Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (price is subject to change with significant exchange rate fluctuations)