Used Joinery for sale (147)

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector Nedpfxowuppwo Anfswf 5-arm wood rack Safety devices and protective guards

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, working length: 130,000 mm, Hundegger CNC Joinery Line Year of manufacture: 2016 Nwedpfxoy Apn Ns Anfef Equipment: Base machine ROBOT DRIVE 450 ROBOT unit for 6-axis machining 16-position tool magazine Hundegger production software Cambium Safety devices: fencing and enclosures Automatic infeed with 13 m buffer function AQF 7 tracks Line laser for component referencing Horizontal unit 2.2 kW Extended outfeed conveyor for up to 13 m timber length Timber stacking supports after outfeed Central lubrication Basic tool set Air blast device for chip removal Basic tool set for ROBOT HSK63E Very well maintained

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA - Loading hopper inlet at the top: 1980x1050mm - Loading hopper inlet at the bottom: 980x1050mm - Discharge for shredded wood: diameter 210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife size: 40x40mm - Screen: 18mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French-made – Similar to WEIMA WL 10 – New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Nwodpfx Asyyzitsnfjf Net price: 88,900 PLN Net price: 2,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of major rate fluctuations, price may change)

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is currently dismantled, stored covered outdoors, and can be loaded immediately. Nsdpex Ehmaofx Anfewf

Condition: used, Year of construction: 2005, functionality: fully functional, I am offering a rare Hundegger K3 for sale. The machine is operational and can be inspected by appointment. The K3 was manufactured in 2005 and comes with the following equipment: - Infeed and transfer cross conveyor - Offcut holder in front of the saw - Underslung swivel crosscut saw - 5-axis universal milling unit (UF5) - Combination support for vertically operating tools 2 reinforced vertical drilling units - Combination support for horizontally operating tools Slotting unit 1 standard drilling unit 1 drilling unit swiveling at 45 degrees - Fully automatic hydraulic beam turning station - Marking unit on stop side - Marking unit on operator side - Underside marking device - Additional monitor in the outfeed area - Deposit table for short components Nedpfx Ansyvplnjfswf - Top feed roller The machine must be dismantled by the buyer. Pickup only from company premises.

Condition: ready for operation (used), Year of construction: 1999, cutting height (max.): 300 mm, cutting width (max.): 400 mm, saw blade diameter: 710 mm, working width: 400 mm, Schmidler SAB 4 Timber Framing Machine, Year 1999 Machining Capacity: 300x400 mm Nwjdoyvp Tlspfx Anfof - Swiveling undertable crosscut saw Saw blade diameter: 710 mm Rotation angle: 360 degrees Tilt: 0–65 degrees - Offcut ejector - Vertical marking pencil - Universal 4-axis milling unit, 40mm finger cutter, dovetail, 100x350mm cutter - Horizontal drilling unit - Vertical drilling unit Price: €16,000 net (excl. VAT) If you have any questions or need more information, feel free to send us a message or call us.

Condition: used, Year of construction: 1997, cutting height (max.): 300 mm, cutting width (max.): 450 mm, saw blade diameter: 800 mm, working width: 450 mm, We are offering this used Hundegger K1-A joinery line, model Hundegger K1, year of manufacture 1997. Type: K1-A Machine number: 1647 Year: 1997 Equipment includes: - Infeed cross conveyor with flat chain belts - Under-table tilting cross-cut saw, blade diameter 800mm Nwjdpoynwx Ejfx Anfef - 4-axis universal milling unit with finger cutter and dovetail cutter Combined support for vertically-operating tools: - Drilling unit - Vertical finger milling unit Combined support for horizontally-operating tools: - Drilling unit - Drilling unit - Slotting unit - Rear marker - Automatic turnover device - Various milling heads Component dimensions from 20x60mm up to 300x450mm. Feel free to contact us with any questions!

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 4,400 mm, Used CNC joinery machine by HUNDEGGER, model PBA, year of manufacture 2003. Njdpfx Aeylxfuonfowf It can process element sizes up to 4.40 m width, 16.50 m length, and 240 mm thickness. Pre-cutting of elements is carried out with the 5-axis chainsaw and re-planed with a roller milling cutter. All processing units, except for the 5-axis circular saw retrofitted at the end of 2010, can handle panel thicknesses up to 240 mm. The 5-axis circular saw can cut continuously up to approximately 240 mm panel thickness at standard feed rates. Equipment: - 5-axis chainsaw 15 kW - 5-axis circular saw 11 kW - Vertical milling unit 22 kW - Vertical milling unit 22 kW - Vertical drilling unit 4 kW - Gantry width: 6960 mm - 18 m guide rail - Processing table height: 700 mm - Frequency converter for 35 kW - Without processing table – it can be self-constructed from cross-laminated timber Dismantling and collection to be arranged by the buyer.

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm under-table crosscut saw, 11KW saw blade 800mm, universal 5-axis milling unit, combination support for vertically operating tools, combination support for horizontally operating tools, drilling unit 2.2KW (1x vertical 18mm x 460mm and 2x horizontal 7mm/8mm x 650mm). Fully automatic hydraulic beam turning station, K2i transport and positioning device, electronic control system, 6-arm outfeed table, vertical finger joint cutter 5.5 KW, longitudinal and cross groove cutter 15.5–30mm, marking and labeling devices (bottom and rear), refined (chrome-plated) support surfaces, left and right height-adjustable safety guard plate, saw blade 900mm. The system is ready for demonstration. Availability: Autumn 2026. Nwedpfjww Nuxex Anfof

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power of the milling unit: 11 W, saw blade diameter: 450 mm, working length: 12,000 mm, working width: 3,500 mm, Essetre Multiwall XS with 5-axis milling unit, 11 kW, 1,000-18,000 rpm, liquid-cooled 22 kW inverter. Working length 12,000 mm, working width 3,500 mm, working height 400 mm. 3 pcs. clamp-nailing units incl. Beck wood nailing unit. Double-sided automatic retractable reference stops. 8-position rotary tool changer. Pneumatic system with 12 clamping elements. Saw unit 450 mm. Chainsaw unit. Built-in NC-controlled butterfly turning table up to 4,000 kg. Projection laser to project the wall onto the machine table. Extraction system with floor duct. The machine is connected and ready for demonstration. Available at short notice. Njdpfx Anoyq S Itsfowf

Condition: excellent (used), functionality: fully functional, Essetre beam processing line model Techno PM with 5 axes Spindle 12 kW liquid-cooled, RPM 1,000–18,000 2 automatic tool changers with 9 positions each HSK 63F Processing height 800 mm Processing width 400 mm Machine is connected and ready for demonstration Nsdpfsw S Naiox Anfswf

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. Nsdpfx Ajya Dc Ijnfswf The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: Nsdpfx Anexx T Rdsfswf - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: good (used), stacker Saulus KY Nwsdpfx Ajyw Nkgsnfjf

Condition: good (used), Elevator conveyor Nwodpfsyw Nfqsx Anfef

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,500 kg, SCM M2 18 kW tracked multi-saw Specifications: - condition - used - manufacturer - SCM - model - M2 - track width - 220 mm - max working height - 120 mm - power of main engine 25 HP ( 18 kW ) - discs diameter - 340 mm - spindle fi 40 mm, bushings fi 70 mm - speed control of the caterpillar in the range 6-48 m/min - caterpillar track in very good condition, not worn out - working table 164 x 90 cm - suction nozzle fi 180 mm Nodst Rivyepfx Anfewf - weight - about 1500 kg - overall dimensions - 220 x 160 x 140 cm ( W x L x H ) Additional information: - the machine is in good technical condition, ready for immediate use - the pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transportation costs Additional photos and video in the link below: drive.google.com/drive/folders/1u41GyV7Exyaj8dfI1m5fPvTzSnMzhRqd ?usp=sharing

Condition: good (used), Technical Description of the Lumber Repackaging Line Purpose of the equipment: The line is designed for automated repackaging of lumber, offering the following operations: Nsdpfxjywaxze Anfswf - Dismantling of kiln-dried (stickered) packs - Formation of transport (shipping) packs without stickers - Reverse repackaging of transport packs into kiln-dried packs with stickers Functional features of the line: - Automatic feeding of lumber packs - Layer-by-layer dismantling of packs with separation of stickers - Accumulation and formation of new packs according to specified parameters - Automatic placement of stickers during the formation of kiln-dried packs - Adjustable pack dimensions (width, height, length) - Integration with sorting and lumber conveying systems - Capability for continuous operation Processed material: - Softwood and hardwood lumber - Thickness: 16–80 mm - Width: 75–250 mm - Length: 3,000–6,000 mm.

Condition: used, The sale is due to insolvency. The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Lifting table: 4,000 kg 3. Outfeed unit with stacking device, left Type: IH106F1X01 Length: 10.60 m Lifting table: 5,500 kg 4. Label printer Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m Nwedpfoxqpqkjx Anfef

Condition: used, SINGLE PARVEAU TENONING MACHINE WITH DIGITAL POSITIONING TYPE 920 WITH 4HP SAW MOTOR Nwedpfjv Txrgsx Anfsf 10HP ROUTER WITH 300MM SHAFT 10HP ROUTER WITH 300MM SHAFT

Condition: used, Lumber Packaging Line • Automatic Unloading Elevator • Automatic Stacker • Automatic Sticker (Stick Placing Machine) Nodpfx Ajywb Abonfswf

Condition: excellent (used), Year of construction: 2018, The line consists of: - WEINMANN OPTIMAT WTZ 120/12 L assembly table - WEINMANN WMS 150 - WEINMANN OPTIMAT WTW 110/12 N/L loading/unloading table - Schmalz Jumbo Ergo 140 flexible hose vacuum lifter The WMS150 multifunction bridge is a CNC machine for the automated processing of timber structural elements (walls, roofs, and floors). Machine dimensions: - Length (X-axis): approx. 3,000 mm - Width (Y-axis): approx. 6,200 mm - Height (Z-axis): approx. 3,000 mm - Workpiece width: approx. 3,200 mm - Main spindle: 18.5 kW with automatic tool changer - FLEX5 indexing system Tool set for WMS tool changer consisting of: - 3-flute universal roughing cutter - Drilling unit - Saw unit - Marker with ballpoint pen technology HSK - Saw unit NL 55 mm HSK63F - Saw unit NL 105 mm HSK63F Gluing system - Holder for PUR gluing unit Nwsdpfx Anjytyuajfef - PUR one-component adhesive unit (1K) with 6 application nozzles Fastening and assembly unit - Automatic height adjustment for fastening device - Holder for ADUNOX screwdriving unit - ADUNOX-TRS screwdriving unit Bridge extension Tool holder beam with integrated Y-axis Sliding guide with U-profile for the bridge Increased X-axis drive dynamics Energy supply system via cable drag chain End position monitoring for handling systems Wheel and sliding block lock, right side of portal Homatic powerControl V2.0 control system Remote control for WMS150 with potentiometer Mobile extraction unit 3.0 kW Electrical cabinet cooling unit Less than 1,000 operating hours

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device Nwodpfx Aneyfhi Nefef - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Condition: excellent (used), 4 spindles: bottom/right/left/top Chromed tables Working width: 130 mm Working height: 100 mm Feed speed regulated by inverter up to 36 m/min Spindle diameter: φ40 mm Nedpfx Anoylv S Ssfewf Total power: 16.8 kW Year of manufacture: 2021 Weight: 2550 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, total length: 9,100 mm, total width: 3,600 mm, Our company is a manufacturer of machines and devices for prefabrication plants. We produce fixed assembly tables, rotary tables, butterfly tables and complete production lines We offer a new assembly table measuring 3.6m x 9.0m - Powder coated construction - Table covered with plywood board with impact-resistant coating - holes for mounting SD-01 pressure actuators - removable and adjustable limiting pins - modular construction for self-assembly (one pallet) - low transport costs throughout Europe Nwjdpjvv Rv Asfx Anfsf

Condition: excellent (used), Year of construction: 2000, Schmidler CNC carpentry line - Model: SAB 4 R - Year of production 2000 - DOS-based software, production files in BTL format - Line length 30 meters - Additionally a spare saw - Video available The line is 100 % FUNCTIONAL Nwedpfeulvldex Anfof