Used Kasto Hba 360 Au for sale (133)

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm Isdpfx Ajifu Ayediea sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Isdpfsu R R Acjx Adiea Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min total power requirement 35 kW weight of the machine ca. 4,2 t Ijdpfjv Nq Rtox Adija dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 Iedpfxefym Ews Adisa with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition.

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Iedsv S E Edopfx Adisa

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min Iedpfovzt Eqsx Adisa height of material-table 950 mm max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 113307651086088, saw band length: 4,115 mm, saw band width: 38 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, cutting height (max.): 260 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Iedewqw Tvepfx Adisa Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: used, Year of construction: 2012, KASTO twinA2 year of production 2012 CNC band saw Automatic - Capacity in passage: 260 [mm] - Capacity on square: 260 x 260 [mm] Ijdpfowihh Ujx Adioa - Capacity in rectangle: 260 x 260 [mm] - Dimensions of cutting blade: 4530 x 34 x 1.1 [mm] - Main engine power: 3 [kW] - Cutting speed: from 20 to 110 [m / min] - Dimensions of machine: 1755 x 2149 x 1568 [mm] - Weight: 1700 [kg] fully functional machine in super technical condition

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Isdpfxjv Nq Rme Adija Material discharge Chip conveyor

Condition: excellent (used), Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Iodpjvyl Dvefx Adiea Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.500 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm Ijdpovxwkfsfx Adiea dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Ijdpevyl Ihsfx Adisa Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.100 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Iodpfx Asxpymaodisa Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Year of construction: 1988, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min total power requirement 1,1 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 80,8 m Isdpfx Adsxz Hhheiea Hydraulic hacksaw with: - Coolant device - good condition

Condition: used, Year of construction: 1994, cutting diameter 260 mm saw band length 4310 x 27 x 0,9 mm table height 810 mm cutting speed 17 m/min total power requirement 3,2 kW weight of the machine ca. 920 kg dimensions of the machine ca. 2,5 x 1,7 x 1,5 mm Isdpforl U Nmsx Adisa

Condition: ready for operation (used), Year of construction: 1986, saw band length: 450 mm, cutting height (max.): 280 mm, cutting capacity 280 mm band length 450 mm double hydraulic vise Iodexbhm Sspfx Adioa

Condition: good (used), Year of construction: 2012, functionality: fully functional, Kasto Functional U Metal Band Saw Manufacturer: Kasto Model: Functional U Year of Manufacture: 2012 Condition: Used, workshop-inspected Standard equipment: - Cutting speed: 20 – 110 m/min - Continuously adjustable mitre device (-45° to +60°) - Cutting capacities: - 90° round: 260 mm - 90° flat (W x H): 300 x 260 mm - 90° square: 260 x 260 mm - +45° round: 200 mm - +45° flat (W x H): 200 x 240 mm - +45° square: 200 x 200 mm - +60° round: 165 mm - +60° flat (W x H): 160 x 120 mm Iedpfxjxxl Hke Adioa - +60° square: 150 x 150 mm - -45° round: 200 mm - -45° flat (W x H): 200 x 240 mm - -45° square: 200 x 200 mm - Weight: 510 kg - Saw blade dimensions: 2910 x 27 x 0.9 mm - Saw blade guides: Carbide, replaceable - Material clamping: Mechanical - Cutting feed: Hydraulic - Saw blade tension: Mechanical - Saw blade cleaning: By means of a driven, easily replaceable wire brush Scope of delivery: - Operating manual - Roller conveyor, 2 x 1 m - Coolant system - Chip brush Machine is powered on. Video available.

Condition: good (used), Year of construction: 2005, Round cutting area: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Isdpfsu R I A Hjx Adisa Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Saw blade tension: hydraulic Saw blade cleaning: using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor

Condition: used, Year of construction: 2008, functionality: fully functional, ATTENTION!: The machine is back on the market due to the buyer’s cancellation. Dismantling of the old machine will begin on November 12, 2025, as the new machine is being delivered. Bandsaw Machine for Processing Large Steel Plates The machine can operate in two different directions: - Across the width of the material: the plates are pushed into the saw frame. - Along the length of the material: the saw blade is rotated 45°, and the saw frame travels along the plate. Sawing Capacities in Manual Operation: - Maximum cutting height with band control: 360 mm (14.2") - Maximum cutting height without band control: 420 mm (16.5") - Cutting height with pressure roller: 280 mm (11.0") - Minimum cutting width: 10 mm (0.4") - Maximum cutting width: 2,000 mm (78.7") - Maximum cutting length: 7,000 mm (275.6") Sawing Capacities in Automatic Operation: - Maximum cutting height (standard): 250 mm (9.8") - Maximum cutting height (option): 350 mm (13.8") - Minimum trimming width: 10 mm (0.4") - Maximum trimming width: 2,000 mm (78.7") - Maximum cutting length: 7,000 mm (275.6") Bandsaw Speed: Infinitely variable - Standard: 13 – 130 m/min (42.6 – 426.5 ft/min) - 14 – 75 m/min (45.9 – 246 ft/min) - Option: 12 – 120 m/min (39.3 – 393.7 ft/min) Feed Rate: Infinitely variable Isdpfoxvqr Tjx Adija - 0.5 – 250 mm/min (0.02" – 9.8"/min) Bandsaw Blade Dimensions: - 9,754 x 54 x 1.3 mm (384" x 2.1" x 0.05") or - 9,754 x 54 x 1.6 mm (384" x 2.1" x 0.06") Kerf: 2.1 mm (0.08") Bandsaw Guide: Carbide, replaceable and adjustable Back-guide for bandsaw blade: Carbide strips, replaceable Bandsaw cleaning: Via easily replaceable, driven plastic brush Option: Automatic adjustment Machine Dimensions: - Length approx.: 11,500 mm (346.4") - Width (with door open) approx.: 8,800 mm (346.4") - Height (with laser lamp) approx.: 4,080 mm (160.6") - Working table height: 1,825 mm (71.8") - Approx. weight: 25,000 kg (55,116 lbs) Total power consumption: approx. 28.0 kW (37.5 HP) Saw motor output: approx. 7.5 kW (10.0 HP)

Condition: used, Year of construction: 2005, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min Iedpfx Aoxz Hhbjdioa total power requirement 1,1 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 1,0 m Hydraulic hacksaw with: - Coolant device - good condition

Condition: used, Year of construction: 2005, Cutting area round : 430 mm Cutting area square: 430 x 430 mm Iedpfjxyq Dkox Adioa flat cutting area: 430 x 430 mm smallest dimension to be cut: 10 x 10 mm minimum length to be cut: 6 mm minimum remaining piece length, single cut: 10 mm minimum remaining piece length automatic operation: 35 mm automatic material feed: . roller conveyor: DoAll 2013-V2 max. unit weight: 2.275 kg tape speed: infinitely adjustable Cutting feed: infinitely adjustable Material feed: with ball screw Automatic feed: with horizontal clamping vise Material stress: hydraulically adjustable Tension: Machine chuck: 200 - 800 daN, chuck feed: 200 - 1500 daN Saw band tension: hydraulic Saw blade cleaning: Easily replaceable double brush, hydromotor driven Coolant system: five nozzles, tank approx. 150 l, pump output approx. 25 l/min Machine dimensions: Length: 2140 mm, width: 4245 mm with chip conveyor, height: 2400 mm mass: approx. 4300 kg vinho: 430 x 430 mm

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg Ijdexab Hcepfx Adiea range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Condition: excellent (used), functionality: fully functional, Thank you for your inquiry regarding a KASTO bandsaw Type: SSB 260 VA Heavy-duty, fully hydraulic high-performance bandsaw, solidly constructed, with a horizontally and parallel traveling saw band, designed for cutting profiles, tubes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is manufactured as a solid construction from polymer concrete, ensuring maximum smooth operation and extended blade life. Guidance of the saw unit is via a vertical and a round column guide (double column guide) with hardened and ground guide rails. Hydraulic blade tensioning and hydraulically preloaded carbide blade guides. Material clamping is achieved via two hydraulic vises. Machine operation is straightforward and user-friendly. The cutting length can be set via a handwheel with 0.1 mm resolution. The quantity setting is handled via a piece counter; when the set quantity is reached, the machine switches off automatically. Material feed is provided by a feed cylinder, ensuring top cutting accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA Cutting capacity: 260 mm x 260 mm (Ø 260 mm) Technical Data – Bandsaws KASTO Bandsaw Automat Machine type SSB 260 VA Technical specifications 2-column guided Year of construction 2000 Cutting range 260 x 260 mm Drive motor (saw gearbox) 4 kW Isdpfx Adsxwzr Hoioa Drive motor (auxiliary) 6.5 kW Cutting speed 15–125 m/min Hydraulic feed rate Infinitely adjustable Saw band dimensions 4115 x 41 x 1.1 mm Feed length 600 mm Max. with multi-feed 5400 mm Material support height 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight 2100 kg Equipment / Accessories: • Swarf conveyor • Coolant system • Multiple feed • Side guide rollers • Machine roller conveyor • Adjustable side guide rollers • Prepared for bundle clamping device • Multiple feed counter • Clamping force reduction

Condition: used, Year of construction: 1980, length 380 mm max. band length 430 mm weight of the machine ca. 0,5 t Iodjup H Nnspfx Adisa +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: reconditioned (used), functionality: fully functional, saw blade length: 300 mm, cutting range round steel at 45°: 150 mm, cutting height (max.): 150 mm, The fully hydraulic high-speed production hacksaw has universal hydraulics for the exclusive or alternating cutting of thin and thick-walled profiles as well as solid material without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely variable hydraulic cutting pressure, lift-off movement and accelerated return stroke, equipped with infinitely variable mitre device as standard. mitre device as standard. Lifting of the saw arm in rapid traverse. Pendulum vice for perfect utilization of the saw blade. Longitudinal guide with ground and and hardened guide rails to transfer the cutting pressure forces to the saw frame. Automatic limit stop. Push-button operation for on, off and up functions of the saw arm Manufacturer KASTO Metal hacksaw Machine type WBS 150/170 U Iodpfx Asrrvgxodioa Drive power: 0,75 KW Stroke rates: 85/170 min Cutting speed: 16/32 m/min Universal hydraulics: standard Saw feed hydraulics Cutting range round: 150 mm Cutting range flat: 150/170 mm Mitre 0-45 ° Material support height: 700 mm Weight: 170 kg. Length/width: 770x700 mm Height: 1370 mm Saw blade dimensions: 300x30x1.5 mm Machine for notching Accessories. coolant device