Used Kf 700 S Professional for sale (73,918)

Condition: new, incl. ramp shaft with ramps / closed loading area with numerous lashing points / hand-operated winch Technical Data: • Brand: Martz • Model: GT PLATEAU 450/2 S 2.7T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration • Technical inspection (TÜV): 2 years from first registration • Internal dimensions (LxWxH): 449 x 211 x 0 cm • External dimensions (LxWxH): 600 x 215 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 625 kg • Payload: 2,075 kg • Chassis: Platform trailer (wheels under the bed) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Anti-slip and waterproof phenolic plywood floor • incl. hand winch with brake • Slide-in ramp compartment below the platform • 2x steel loading ramps • Very robust welded steel frame • Frame fully hot-dip galvanized by immersion • 10x tie-down eyes integrated laterally in frame profile (600daN/kg) • Sideboards can be retrofitted anytime • Reverse-automated braking system • KNOTT overrun hitch and parking brake • Extra strong bolted V-drawbar (reinforced) • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Rear frame-mounted recessed lighting • Rear left and right LED outline marker lights • Automatic jockey wheel installed Accessory options (retrofit on request): • 100 km/h certificate incl. shock absorbers • Wheel chocks • Sideboards • Anti-theft device • Spare wheel • Storage box • Reversing lights • Lashing straps • And much more Brand new vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Early dispatch of vehicle documents or provision of export/temporary plates (Germany) upon request - Export plates incl. customs registration available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been authorized dealers and workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. Pedex S Rm Sepfx Anfsgk - Subject to errors, mistakes, and prior sale -

Condition: new, * IMMEDIATELY AVAILABLE * Including continuous ramp 150cm / Low loading platform / Lashing eyes recessed in floor Technical Data: • Make: Martz • Model: BAU-3 350/2 S • Vehicle type: Construction Machinery Trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 350 x 182 x 25 cm • External dimensions (LxWxH): 552 x 241 x 182 cm • Loading height (floor): 34 cm • Gross vehicle weight: 2,700 kg • Unladen weight: 630 kg • Payload: 2,070 kg • Chassis: Low loader (wheels beside platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable Pedpex Tixiofx Anfegk DESCRIPTION • Robust, walk-on steel mudguards with continuous safety anti-slip strips • Continuous phenolic plywood floor, jointless, anti-slip and waterproof • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Steel loading ramp pivoted on shaft • Strong eccentric catches • Stake pockets at all four corners for tarpaulin frames, mesh sides, side wall extensions, or high front wall • Rugged support legs on the loading ramp • Assisted ramp lift • Very low chassis for minimal approach angle • With excavator bucket rest • 8x recessed side lashing rings in frame profile (600dAN/kg), TÜV certified • Maintenance-free KNOTT rubber torsion axles • Reversing automatic system • KNOTT overrun coupling and parking brake • Very sturdy reinforced bolted V-drawbar • 13-pin plug • Reversing lamp • Large dimension safety lighting • Lane marker lights at rear • Integrated rear fog lamp • Rear frame lighting recessed • Central automatic jockey wheel Optional accessories – enquire if interested: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing lamp • Lashing straps • and more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or temporary license plates (Germany) can be provided - Export plates incl. customs clearance available All descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been your professional dealer and workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, mistakes, and prior sale excepted

Condition: good (used), Thyssen measuring plate / control plate made of natural hard stone Thyssen measuring plate made of hard stone (granite plate) length: 2750 mm width: 700 mm thickness: 200 mm Total height with table: 1200 mm Height vertical plate: 240 mm thickness: 200 mm 2 x T-slot Flatness tolerance according to DIN 876/0 Base frame with cabinet Trimos HGL 2000 length measuring device without measured value display Pjdpsihpclefx Anfogk Financing through our bank is also possible. komplett-konzept.leasingo.de More measuring plates in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: used, mileage: 601,000 km, power: 316 kW (429.64 HP), first registration: 03/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 6,100 mm, loading space width: 2,460 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, MAN TGA 35.430 / 8x2 Platform 6,10 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 601 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 610 x 246 cm (L x W) CAPACITY: 13 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 185/350/136 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HIAB 700 E - 6 + REMOTE CONTROL TEL: Pgedjw Ruf Ispfx Anfok * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 42138

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 753 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm Pgodpfx Anexabc Dofek - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm Podpfx Ajxaacpjnfjgk - Plasma nitrided 750 version with scale - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 949 kg dimensions of the machine ca. 2400 x 1200 mm Pgodpfx Asxaayzsnfok SIEGMUND authorized dealer - all items available! Item No.: 7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrated extreme version with scale - Side panel + table top with diagonal grid - incl. 4x base equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface Podpfx Aexabiwonfegk - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment

Condition: good (used), Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The display unit SOEHNLE 2790 is very handy and also protected to IP65 protection, making it easy to use even in wet areas With just five buttons, the SOEHNLE 2790 digital display is easy to use. The built-in functions are on / off, taring, clear tare, zeroing and printing. In addition, the 2790 display also has a piece counting function. The display unit SOEHNLE 2790 can not only be operated battery-powered with the included 230 V power supply, but also up to 100 hours off-line. The 20 mm high digital display is backlit during mains operation and thus very easy to read. For battery or battery operation, an automatic shutdown to protect the batteries and batteries can also be set. Soehnle Professional 2790 weighing    Technical specifications ᐳ Anodized aluminum housing with polyamide injection molded parts ᐳ Dimensions: L 306 x W 77 x H 82.6 mm ᐳ Connection of a balance with strain gauge load cells ᐳ Load cell supply voltage: 4 V, approx. 67 Hz rectangle ᐳ Measuring voltage: 0.2 -12 mV ᐳ Smallest input signal per calibration value: 0.4 μV Pgodpfxjd Sfb Is Anfok ᐳ Load cell impedance range: 87-1,200 ᐳ Load cell connection: 4- or 6-wire ᐳ Temperature range: -10 to + 40 ° C ᐳ Weighing ranges: 0.1-100,000 kg ᐳ Mains operation via mains adapter Input 230 V AC, 50 Hz, Output 9 VDC, 300 mA ᐳ Battery operation for approx. 160 hours with 4 Mignon batteries 1.5 V ᐳ Auto-off function (time adjustable) Floor scale Soehnle 9013 Weighing platform 150x125 cm up to 1500 kg Use of the floor scale in the temperature range from -10 ° C to +40 ° C Floor scale is ready for use immediately after setting up Maintenance-free weighing technology from SOEHNLE More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t Pgedjibw Sxepfx Anfjk - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. Podpfxogvkfvj Anfjgk The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, bore capacity in steel (diameter) 13,0 mm x-travel 300 mm y-travel 130 mm turning speeds 100 - 2500 U/min throat 165 mm spindle taper MT 3 MK table-size 490 x 120 mm diameter of hob 30,0 mm motor 230 Volt Pgedpfx Aoxabb Hjnfek total power requirement 0,75 kW weight of the machine ca. 50 kg. dimensions of the machine ca. 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Pgsdpfx Anexaab Eofok Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table length 2400 mm table width 1200 mm Podpfsxaa Eksx Anfsgk table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore diameter 28 mm - Surface holes with a 100x100 mm grid - Rounded corners, edges, and holes - Side panel height 200 mm - Side panel hole spacing 50 mm - Surface scale included - Construction reinforced with ribs - Grid lines enable precise setups The welding tables are equipped with a scale as standard. Plasma nitrided finish: - Protection against rust, scratches, and weld spatter adhesion - More corrosion-resistant / higher load capacity Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma nitrided finish (750) with scale - Includes 4x base feet

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm Pjdpfxsxab Rnj Anfegk - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, power capacity 0,75 kW degree 45° Grad turning speeds 10.000 U/min milling height 4,0 mm motor 400 Volt range L-W-H 560 x 300 x 450 mm weight 44,0 kg Podpsxab H Njfx Anfegk Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool

Condition: new, table length 1500 mm table width 1000 mm table height (lateral area) 100 mm weight 255 kg SIEGMUND authorized dealer - all items available! Pgedoxaa Rtjpfx Anfek Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Pgedpjxaablefx Anfjk Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid Pgodpsxaa Hbofx Anfek - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 726 kg The welding tables are provided with a scale as standard. Pgedpfexab D Uox Anfok Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Product description Psdpfx Aoxaa Nvsnfegk - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Condition: good (used), PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S5 Digital Input Digital Input 2 pieces with bus module -Type: 6ES5 421-8MA11 / 6ES5 421-8MA12 -Bus module: Siemens 6ES5 700-8MA11 -Number: 1x double module available -Dimensions: 165/100/H125 mm -Weight: 0.7 kg Psdpfx Anewpgrljfjgk

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, workbench, work table -Diameter: 700 mm -Height: 810 mm adjustable -Sheet thickness: 19 mm -Number: 1 table available -Price: per piece Pgjdpfx Anechhz Esfsk -Weight: 88 kg/piece

Condition: good (used), PLC control, digital input, digital input Pedpfswpgmiox Anfjgk -Manufacturer: Siemens, Simatic S5 Digital Input Digital Input 2 pieces with bus module -Type: 6ES5 421-8MA12 -Bus module: Siemens 6ES5 700-8MA11 -Number: 5x double module available -Price: per piece -Dimensions: 165/100/H125 mm -Weight: 0.7 kg/piece

Condition: good (used), grass catcher, collection container, mower deck, lawnmower, cutter bar, disc mower -without a fan Pjdeb Ig Uuepfx Anfegk -for side ejection -Dimensions: 1500/800/H1400 mm -Weight: 100 kg