Used Lathe Chuck for sale (7,336)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Lhjdpfxowz Rifj Anxjl Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 1990, turning diameter 60 mm turning length 200 mm Lhjdpfx Ajt Hw Atsnxjl number of slides total power requirement 20 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Colchester Triumph 2000 Gap Bed Centre Lathe with Acu-rite III 2 Axis DRO, Swing Over Bed 400mm Diameter, Distance between Centres 1300mm, 250mm 3 Jaw Chuck, Spindle 25 - 2000rpm, 3 Position QCTP. S/No. 6/0044/28919 Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lhjdpfx Ansz Aqwcexjl Lot 12 of Auction 3500 - Ending Wednesday 30th September 2026 at 3pm (UK Time)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Lhjdpfszxrkijx Anxol Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: used, XYZ 2400 Gap Bed Centre Lathe with Acu-rite 2 Axis DRO, 315mm 3 Jaw Chuck, Swing Over Bed 660mm Diameter, Distance between Centres 2400mm, Spindle Speeds 30 - 1500rpm, 2 Position QCTP, 710mm Diameter Face Plate, Steady Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lodpfx Anozy N Rcjxohl

Condition: used, Hardinge Talent Slant Bed CNC Lathe Model TI. S/No. 4500117 with Fanuc OT-B CNC Control, 10 Position Tool Turret, Tailstock, Hardinge Collet Chuck and Collets, Acrovu Feedmaster CNC Barfeed 5m Long, Kitagawa B-205 Powered Chuck Ledpozy Rafsfx Anxjhl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Lodezy N Syepfx Anxehl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Lsdoxpqz Uopfx Anxjhl Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Lhedpfx Anezux Iyexol Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm Lhsdpfx Aju Idwbonxsl - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Lhedpfjzux Elsx Anxol Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Lhsdowf Sfvjpfx Anxsl Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2020, Star SB-20R Type G CNC Sliding Head Lathe with Fanuc Series Oi-TF CNC Control, 5 Axis Machine, Twin Spindle Collet Chucks, 16 Tool Positions, up to 7 Turning Tool Positions, 4 Sleeve Tool Positions, 5 Driven Tool Positions, (5 Spindle Cross Drilling Unit ER11/16 0M151), 20mm Max Work Piece Diameter, Main Spindle Speed 10,000rpm, Sub Spindle Speed 9000rpm, Fire Trace Automatic Fire Suppressant System, Parts Catcher & Conveyor. S/No. 7009 (0374) (2020), 1750kg with FMB Micromag 20 6 meter Barfeed. Country of Origin: Japan Ledez Armxspfx Anxshl Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2021, Citizen Miyano BNJ-51SY6 5 Axis Fixed Headstock Lathe with Fanuc Oi-TF Control, Serial No. DV8166 (2021), Twin Spindle Collet Chucks, Twin Turret, Main Turret 12 Position all Driven, Secondary Turret 8 Position 4 Driven, Main Spindle 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher, Cromar Combi 500 Swarf Conveyor, Imeca Boss 545-E 5 Meter Barfeed, Serial No. 020529GA01. 5,800kg. (2) x Boxes of Driven & Static Tooling for BNJ 51. Country of Origin: Philippines Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lhsdpfszzb Rdsx Anxsl

Condition: used, Year of construction: 2021, Citizen Miyano BNJ-51SY6 Fixed Headstock Lathe 5 Axis Machine with Fanuc Series Oi - TF CNC Control, Twin Spindle Collet Chucks, Twin Turret, Main Turret 12 Position All Driven, Secondary Turret 8 Position, 4 Driven, Max Spindle 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Max Work Piece Diameter 51mm, Parts Catcher, Cromar Combi 500 Swarf Conveyor. Serial No. DV8125 (2021), Imeca Boss 551E 5 Meter Barfeed, Serial No. 020829GA03. 6200kg. (1) x Box of Driven Tooling for BNJ 51. Country of Origin: Philippines Lhsdpfxezzb Hfe Anxsl Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard Lodpfxjyuyrus Anxohl - Spindle cover with emergency stop - German instruction manual

Condition: used, Year of construction: 2018, Citizen Cincom L20E - 2M10 CNC Sliding Head Lathe with Cincom System M70LPC - VU CNC Control, Twin Spindle, Collet Chucks, 20mm Max Workpiece Diameter, 26 Tool Mounting Positions, 5 Lathe Tools, 7 Gang Tool Drilling, 6 Front Drilling, 8 Back Drilling, Driven Tool Capability, Spindle 1 - 200 - 10,000rpm, Spindle 2 - 200 - 8000rpm, Fire Track Automatic Fire Suppression System, Filtermist 5400, Parts Catcher & Conveyor, Serial No. QF6822 (2018) Imeca Boss 338-HD SM Barfeed, Serial No. 021941NA01 (2019), 2350kg. Country of Origin: Thailand Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lhjdpfx Aozzb Ayenxjl

Condition: used, Year of construction: 2011, Citizen Miyano ABX-64SY Fixed Headstock Lathe 9 Axis Machine with Fanuc Series 31i Model A CNC Control, Twin Spindle Hainbuch Collet Chucks, Twin 12 Position Tool Turrets All Driven, Max Work Piece Diameter 64mm, Main Spindle 40 - 4000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher & Conveyor, Yoshida Swarf Conveyor. S/No. 4SSY0135 (2011) 9,300kg, Iemca Master 865 Verso 5 Meter Barfeed. S/No. 02111465A03 (2011). Country of Origin: Japan, (2) x Boxes of Driven & Static Tooling for ABX64. Country of Origin: Italy Lhodpfx Anoz Arp Hjxol Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Metal turning lathe Model: Conventional Lhedpfx Aewnhf Rsnxsl Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Documentation available: No - CE certificate present: No - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, STAR ECAS-20 — CNC SWISS-TYPE AUTOMATIC LATHE MACHINE IDENTIFICATION — VERIFIED FROM NAMEPLATE Manufacturer: Star Micronics Co., Ltd., Japan Model: ECAS-20 Type: 570 Manufacturing date: March 2011 Serial number: 0509 Lot number: 047 Supply voltage: AC 200 V, three-phase Frequency: 50/60 Hz Rated apparent power: 8.0 kVA Machine weight: 3,500 kg CE marking: Present MODEL SPECIFICATIONS — MANUFACTURER DATA Configuration: 10 axes; independent front/back machining; simultaneous two-tool turning Control system: Star Motion Control System Maximum machining diameter: 20 mm Headstock stroke: 205 mm MAIN AND SUB-SPINDLES Maximum speed: 10,000 rpm each Motor output each: 2.2 kW continuous / 3.7 kW for 30 minutes C-axis indexing: 0.01° each Sub-spindle chucking diameter: 20 mm Ledpfxez D Ezve Anxjhl Front-ejection length: 80 mm Workpiece projection: 30 mm TOOLING Turning positions: 4 front, 2 rear Tool shank: 12 mm; optional 16 mm Sleeve-holder positions: 4; optional 2 rear-end stationary tools Stationary drilling: Ø10 mm Tapping/die-cutting: M8 × 1.25 Optional driven positions: 3 front, 3 rear Driven-tool speed: 8,000 rpm Driven-tool motor: 0.75 kW Driven drilling: Ø8 mm Driven tapping: M6 × 1.0 Milling: Ø10 mm Slotting: 1.5 mm wide × 4 mm deep BACKWORKING Tool positions: 4 Drilling, stationary/driven: Ø10/Ø8 mm Tapping, stationary/driven: M8 × 1.25 / M6 × 1.0 CAPACITY AND DIMENSIONS Coolant tank: 120 litres Machine dimensions (W × D × H): 2,588 × 1,150 × 1,765 mm Overall installation dimensions with peripherals: Unconfirmed EQUIPMENT VISIBLE IN PHOTOGRAPHS Bar-feeding equipment with pendant control Fire-suppression cylinder and automatic CO₂ warning label CNC operator panel

Condition: used, Year of construction: 2014, Miyano ABX-64THY2 Twin Spindle Fixed Head Stock Lathe with Fanuc Series 31i Model B CNC Control, Triple Turret all 12 Position, Hainback Collet Chucks, 10 Axis Machine, Driven Tooling Capability, Spindle 1 - 40 - 4000rpm, Spindle 2 - 50 - 5000rpm, Max Working Diameter 64mm, IEMCA Master 21 3m Bar Feed, LNS Swarf Conveyor. S/No. CP640028 (2014) 11.350kg. (2) X Right Angle Driven Tooling for Miyano ABX64, (2) x Straight Driven Tooling for Miyano ABX64. Country of Origin: Japan Lhodpfx Anszzbxboxsl Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2013, XYZ Proturn SLX1630 CNC/Manual Lathe. S/No. 16-P-10008-095 (2013) with Proto Trak SLX Control, 200mm Diameter 3 Jaw Chuck, Swing Over Bed 440mm Diameter, Distance between Centres 700mm, 3 Position QCTP, Spindle Speeds to 2500rpm Ledpezy N I Ujfx Anxjhl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up. Ledpfxjz D Hx No Anxjhl

Condition: excellent (used), Lead/Pull spindle lathe Manufacturer: Dalian Inv. No. 3857 Type: CDS 6232 Year of manufacture: 2008 * Distance between centers: 750 mm * Center height: 170 mm * Swing over bed: 340 mm * Spindle speed: 59 - 2100 rpm * Spindle bore: 52 mm * 2-axis digital display SINO * 3-jaw chuck * Coolant system Machine weight: approx. 1450 kg Lhjdpfxozrvn Es Anxol

Condition: like new (used), Year of construction: 2023, Maximum turning diameter 220mm, distance between centres 800mm, swing over bed 240mm, spindle speed 4,000rpm, milling speed 12,000rpm, sub-spindle speed 4,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 66mm, 2 X 12 station turrets, spindle power 35Kw, Y axis + /- 45mm, Lhsdpfx Aez D Eupjnxol swarf conveyor, coolant., Fanuc 31i.