Used Rotary Transfer for sale (6,504)

Condition: used, Year of construction: 2016, Hydromat HB32/16 Rotary Transfer Machine. S/No. HB32-768 (2016) Model Epic II Series CNC, Machine Type Hydromat 32/16, Current Machining hours 29,312, CNC Control System Bosch MTX, Horizontal Heads: 16, Vertical Heads: 8, Indexing time : 0,7 seconds, Max. Bar Diameter: 32mm, Max. Part Length: 150m, Weight: 6 500kg Complete with Hydromat Automatic Bar Feed, Swarf Conveyor Knoll 450-K1, Lubricating Tank Knoll VRF 450/2350, Filtration Unit Knoll VRF 450/2350, Air Filtration Erni AG Type A0-1800/2, Additional Heads and Extensive Spare Parts, Machine Manuals Hfedpfx Aexfu Dfeg Non Location: This lot is located in South West of England, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Motor-driven rotary shift table Stepless rotary table (pitch 0.001°) Hedpfx Asif Rlbsg Nofn Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Hfodpfx Agjdg Da Io Nen Year 1988 Pristine Condition Not been used for 15 years

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Hoder I E Itjpfx Ag Nsfn Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: ready for operation (used), Year of construction: 1999, There are 4 almost identical Pfiffner CNC rotary transfer machines available. Years of construction: approx. 1999, control: Siemens S5/Siemens HME, stations: 12, process: sawing/feed/turning, operating hours: approx. 8500 hours: Sawing/feed/turning, operating hours: approx. 85383. Including loader, switch cabinet, chip conveyor, cooling lubricant system and a total of approx. 35 processing units. Documentation available. On-site inspection is possible. The machines are dismantled and stored, but it is possible to see similar machines in operation. One machine is incomplete and suitable as a spare parts carrier. Hfsdpfx Aswv Um Deg Nen

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg Hfodpjw H I R Rjfx Ag Nsn General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 110 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 150 mm, workpiece length (max.): 40 mm, workpiece width (max.): 80 mm, The rotary indexing machine is comprehensively equipped; the machine's original price is approximately €3,000,000. No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 110 mm Travel distance Y-axis: 150 mm Travel distance Z-axis: 150 mm Work spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: Max. 24 Number of tools on the machine: Max. 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Table positioning repeatability: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Rack for oil tubing, extraction system and tubing Loading systems Vibrators Cabinets / side panels / upper channel / cabinet tops Platform Hodowy I Tljpfx Ag Nefn Polycarbonate partitions Fire protection system with control console Further information on transportation dimensions can be found in the attached packing list.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, 3 Rotary Indexing Systems + 3 Linking Robots OVERVIEW - Bar feeder - Rotary indexing system 1 (cutting + machining clamping 1) - Rotary indexing system 2 (machining clamping 2) - Placement on conveyor belt - Marking - Deburring unit - Stacking cell with ejection of measuring parts TECHNICAL DETAILS Process description Step 1: Manual placement of bars onto the bar magazine Step 2: Automatic insertion of the bar and cutting off the workpiece Step 3: Robot takes the workpiece from the saw clamp and transfers it to the clamping fixture of rotary indexing system 1 (station 1) Rotary indexing system 1 (machining clamping 1) Station 2: Contour milling left and right Station 3: Contour milling top Station 4: Slot milling (2x), drilling Ø 6.5 mm (4x) Station 5: Drilling Ø 5 mm (4x), threading M6 (2x), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2x) Station 6: Transfer to second system Rotary indexing system 2 (machining clamping 2) Station 1: Robot takes the part from station 6 of system 1 and places it into the clamping fixture of the second rotary indexing system Station 2: Contour milling bottom Station 3: Slot milling (2x) Station 4: Contour milling bottom (2x) Station 1 (again): Unloading onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar feeder Bar magazine: for 2000 - 6000 mm bar material Magazine width: approx. 2100 mm Insertion height: approx. 1200 mm Parts buffer: 10 bars Rotary indexing system 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feeds: 14+1+5 NC axes Rotary indexing system 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Hfsdpfx Agewqf R Ns Nsn Spindle units: 4 Feeds: 9+1+3 NC axes Discharge conveyor Chain conveyor: workpiece carrier made of plastic Incline: approx. 3° Length: 8,000 mm Part inquiry: at loading station / marking station / unloading station Rotary indexing system 3 - SEMA REA 30/5-6S-NC-R Number of positions for deburring: 5 Control: Siemens Simatic S7 Loading station: 1 Machining units: 6 Extension of deburring unit: blowing off of workpieces Robot: for loading and unloading the deburring unit, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Connected load: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Connected load: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Connected load: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Hfjdju T Rg Rspfx Ag Nsn

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Hodpfxsw E Hpvj Ag Nofn Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Hsdeu T Rhbepfx Ag Nefn

Condition: used, Year of construction: 1963, functionality: unexamined, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread-cutting unit Hfsdpfx Agewyn S Uj Njn Feed of the drilling units: mechanical feed via quill Drilling heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: • The machine is designed for large-scale production • The machine features a sturdy machine table with chip discharge to the underside of the table center with a separate large coolant tank • Extensive set of clamping and auxiliary devices included • The machine is equipped with a 6-station rotary indexing table

Condition: ready for operation (used), Year of construction: 2012, A special-purpose rotary transfer machine for aluminum processing, rebuilt by Stöferle, is available. 1) Complete machine, connected load: 120kW, hydraulic pressure: 50bar, pneumatic pressure: 6bar, transport width: approx. 2600mm, stations: 8, machine dimensions X/Y/Z: approx. 3000mm/2600mm/2800mm, weight: approx. 9500kg. 2) Coolant system Knoll with scraper belt conveyor, year of manufacture: 2010. 3) Hydraulic system Hydropa. 4) Pneumatic system Festo. 5) Central lubrication system ALS. Documentation available. An on-site inspection is possible. Hfsdpow Rqw Tefx Ag Non

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Hodpei Ew Dpjfx Ag Nofn

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Hedpfsp S Sq Dox Ag Nofn

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Hedpjw Hglmjfx Ag Njfn

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Hfedsw Emx Repfx Ag Nen

Condition: good (used), Table size:1500x1500mm Capacity : 6t Hsdjfvqmxepfx Ag Nefn Dimension: 1600x2500x2000mm Hydraulic

Year of construction: 2016, condition: excellent (used), 1 x Ilpra Rotary Pot Fill and Seal Machine Hfsdpfxswv Smho Ag Non Type: Fill Seal FS5000 Year: 2016 Located in Melksham, Wiltshire

Condition: used, color: other, Empty weight: 2 kg Hfsdpfxonkcfms Ag Njn Working condition. No guarantee. More available. Please contact us if you can't find what you are looking for.

Year of construction: 2013, condition: excellent (used), Heat exchanger / SPIRAFLO. Type - XTSD 104/64-6-304/316-C Hjdpfehtuu Uox Ag Nofn Is made in 304 and 316 steel. Year of manufacutre - 2013. Empty weight - 2.000kg. Total dimensions - Length - 700cm. Width - cirka 235cm. Height - 200cm.

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Manufacturer: Stork Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good Hfodpfxewdibxs Ag Nsn

Condition: used, New: No Empty weight: 2 kg Hsdponnz Ecefx Ag Nofn Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 2 kg Hfedpfx Agonkcf Re Non Working condition. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 2 kg Working condition. No guarantee. More available. Please contact us if you can't find what you are looking for. Hfedpfsnkcggjx Ag Nsn