Used Leather Punch for sale (4,337)

Condition: ready for operation (used), Year of construction: 1987, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 21104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, compressed air connection: 6 bar, Bihler Automatic Machine M35 – Year of manufacture 1987 – 7 t press force – ready for operation For sale is a Bihler automatic machine, model M35, year 1987, in very good and well-maintained condition. The machine features a press force of 7 tons, a compressed air connection with 6 bar, and has approximately 70,000 operating hours. The automatic machine is fully functional and immediately ready for use. Bihler machines are renowned for their robust, long-lasting construction and reliability in industrial applications. The M35 is ideally suited for stamping, bending, and forming operations. The machine can be inspected under power in our workshop by prior appointment. Spare parts are still readily available. Itedpox Tukqefx Addob

Condition: good (used), Punching machine, hydraulic punching machine, hydraulic press, hydraulic press -Insert tool -Width: 290 -Length: 550 -Height: 260 -with hydraulic unit -Steering -Foot switch -Dimensions: 800/700/H1300 mm Itjdpfob A H Taex Addjb -Weight: 400 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies Iedpfx Adefig Spsdetb -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm Itedeiqhgqopfx Addjb -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Condition: good (used), Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system Itsdpjb A I Ibofx Addeb -Quantity: 5x punches -Max. width: 1000 mm -Tool built-in: 8x45 mm -Distance between punches: 187 mm -powered: electric -Weight: 280 kg

Condition: good (used), Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket Isdperwqbrjfx Addstb -Manufacturer: Raskin, punching bracket type 15 BL 245 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Condition: good (used), Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Division: 8 x punch pairs with a spacing of 60 mm (Ø 4 mm) Itodpob A I I Tofx Addob -Distance between the two outer pairs of punches: 975 mm -Spacing: 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. passage width: 1000 mm -Drive: electric -Weight: 260 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm Isdpfoiqhgujx Addotb -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

Condition: good (used), Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket, for notching machine, sheet metal notching machine, notching shear, corner notching machine, corner shear, corner shear -Manufacturer: Raskin, punching unit type 125 NIA 111.163.0 -Punching capacity: 3mm -Dimensions: see photos Itedperw Dadefx Addob -Dimensions: 270/200/H150 mm -Weight: 30.5kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punching die, rotary die -Manufacturer: Mubea, die-cutting die, round die Ø 52 mm -Type: Mubea 52 -Overall dimensions: Ø 150 x 40 mm -Weight: 4.7 kg Itsdpeiqhg Hjfx Addsb

Condition: good (used), Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction Iedpeiqhhcjfx Addetb -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg

Condition: good (used), Rung and miter punch, rung punch Iodpfx Ajif Hursddjtb -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

Condition: ready for operation (used), Year of construction: 1979, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 24104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, type of input current: three-phase, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, punching force: 7 t, control cabinet width: 410 mm, control cabinet length: 630 mm, control cabinet height: 1,320 mm, compressed air connection: 6 bar, With 70,000 operating hours, it has certainly seen considerable use, but this is not an unusual figure for machines of this type in industrial operation – many remain productive for years with far higher hours if they are properly maintained. Full functionality is assured – the drive has been replaced once. On the positive side, the machine is fully operational, proven in industrial environments, robust, and there are still many spare parts available for older Bihler machines. Itjdjx Ttb Uepfx Addsb

Condition: used, Trolley Beam Punching Machine / Trolley Beam Punch Sandt Type 530 - Used Machine Punching force: 30 tons Table size: 1600x500 mm Trolley size: 500x500 mm Used, overhauled machine Isdpfox Sdzpex Addstb

Condition: used, Sandt 530 machine available with 80 T or 100 T Punching force: 800 kN Table size: 1600 x 800 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled or Punching force: 1000 kN Table size: 1700 x 1050 mm Punching stroke: 20 – 165 mm, infinitely adjustable Itedpfox Sdy Eox Addjb Working height: without punching pad approx. 1000 mm Overhauled

Condition: used, Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Daumenloch Druchmesser 20mm Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Thumb Cut 20mm  Isdsx Rdc Rspfx Addotb Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 041613, Punching and nibbling machine TRUMPF Trumatic 500 Ijdpex Td Edefx Addstb Year of manufacture: 2000

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Itjdjtvar Ijpfx Addeb

Condition: used, - Pressing force 25 t - Throat depth 750 mm - Max. punching diameter 110 mm - Hydraulic tool clamping - Stroke adjustment with digital display - X / Y with digital display - Table size 1600 mm x 1050 mm - Weight approx. 2000 kg Itodpsx Tvhwofx Addsb

Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Ijdpfx Aex Nfhljddetb

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Itjdpex Nd U Dsfx Addob

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Itodpfx Asx Triwsddeb Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: used, Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, EQUIPMENT Itsdpfx Adex Np Shjdeb Centerline blanking station Machine elevation 1800 mm Punching plates PM 106 5 mm Blanking station Non-stop feeder TECHNICAL DETAILS Sheet size: 750 x 1060 mm

Condition: new, Fully automatic sawing and punching or drilling in a single machine! Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Compatible with Ø 500 or 550 mm saw blades, reversible mechanism for cut lengths up to a maximum of 4000 mm. Saw-Punching Automation System Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching based on the Profilma 502 model • Fully automatic operation Itjdpfex Haftjx Addob and Saw-Drilling Automation System Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously • Fully automatic operation

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment Itodpjip Uqmefx Addjb - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm