Used Liebherr R 964 for sale (248)

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Iedpfx Aox Ezyvsddstb Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: excellent (used), functionality: fully functional, mileage: 112,617 km, power: 350 kW (475.87 HP), gearing type: automatic, fuel type: diesel, mast type: telescopic, Year of construction: 2017, operating hours: 4,795 h, Superstructure operating hours: 8,896 h Undercarriage operating hours: 4,795 h Itodpfx Ajxg Ewfsddob As of 30.09.2025. Crane remains in operation. Counterweight trailer

Condition: used, mileage: 1,001 km, gearing type: other, color: white, first registration: 01/2015, Year of construction: 2015, driver cabin: other, Vehicle location: Bovenden. Superstructure: Liebherr concrete mixer HTM 904F 9m³ on Dautel WS4 interchangeable system. The concrete mixer is part of an interchangeable system (Dautel WS4) with a VDL SK-25-5700 roll-off device with push-articulated arm for containers up to 7 m in length. The interchangeable system was removed from an Arocs 3240 8x4 with a 4250 mm wheelbase. Iedpox H Twcefx Addstb Interchangeable system and roll-off device available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, Year of construction: 1998, operating hours: 13,258 h, 1998 | Liebherr L 522 with High-Tipping Bucket | Used Wheel Loader | 13258 hours 📍Location: Germany, Stuttgart 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Itjdpfxexy Amqj Addeb 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Wheel loader Liebherr L522 with high dump bucket. the condition of the machine corresponds to the value of the operating hours. leakage hydraulic oil on one of the two chassis motors. at the time of inspection, the machine ran / functioned without any other abnormalities. the machine shows wear on bolts and bushings corresponding to the age and mileage and the purpose of use, as well as signs of use (dents, abrasions, etc.) and corrosion. the machine has not been tested under load. well maintained and serviced machine. ready for immediate use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32949 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, operating hours: 9,100 h, Equipment: all wheel drive, Liebherr Wheel Loader L 538 P High-lift 2 plus 1 Serial No.: VATZ1559VZB049931 Year of Manufacture: 2018 Operating hours: approx. 9,100 Service history available until 23.01.25 at 8,836 hours (recorded on the Liebherr central computer) Liebherr 4-cylinder inline engine, water-cooled with turbocharging and intercooler, 150 HP Hydrostatic drive with 3 driving ranges: - Drive range 1: 0 – 6.0 km/h - Drive range A1-2: 0 – 16.0 km/h - Drive range A1-3: 0 – 36.0 (40) km/h * Automatic climate control – maintains the set temperature * BSS ride control (oscillation damping) * Access aid for easier cleaning of the windscreen * Central lubrication system – Liebherr factory-installed * 3rd hydraulic circuit, e.g. for high-tip bucket, grapple bucket, sweeper, etc. * Engine air intake via TOP-AIR pre-filter * Premium display with touchscreen * Comfort driver's seat with pneumatic suspension * Seat heating * Adjustable steering wheel * Opening window on the left in the door * 4 x working lights front on cab roof * 4 x additional lights rear on cab roof * Rotating beacon, yellow, on cab roof, center * Engine air intake via TopAir pre-separator * Fluff screen in front of radiator pack * Coarse-mesh radiator for easier cleaning * Reversible fan for blower cleaning of radiator pack * Battery master switch * Radio with Bluetooth + USB * Fire extinguisher in cab * Rear mudguard extensions – rubber * Piston rod protection for tilting cylinder * Rear-view camera, display shown when reversing * Automatic engine shutdown after 5 minutes idle * Visual reverse warning system with blue strobe lights * Rear distance warning/obstacle sensors, right and left (acoustic signal) Iodpfx Adjx Iy D Sjdotb * Rubber extensions on rear mudguards * Reinforced rear bumper/counterweight * Lamp carrier made of steel instead of plastic * Windscreen cracked Permissible total weight: 17,000 kg – curb weight approx. 14,500 kg Machine width: 2,500 mm Tires: 20.5 x 25 VA L5 – 50% foam-filled Tires: 20.5 x 25 HA L5 – 50% foam-filled Offer includes hydraulic quick coupler and bucket: €56,900 net Optional equipment at extra charge: - 4-in-1 bucket (clamshell/grading bucket) 2 m³: €3,950 * High-tip bucket from 3 – 5 m³ – Price on request! - Light material bucket 5 m³: €3,990 - Bucket with clamp from 2.0 to 3.5 m³: €3,660 - High-tip bucket from 2.5 – 5.5 m³: from €5,990 - Pallet forks, 5 ton: from €1,950 * All prices net plus VAT or for export Sale only to businesses or for export. Sold as is in current condition. No warranty or guarantee. Kilometers and operating hours are read from the odometer/hour meter; no guarantee/warranty for accuracy. Subject to prior sale. This description does not constitute a binding offer. The information provided does not constitute guaranteed characteristics. The description and details serve only for general identification of the vehicle and do not constitute a warranty in terms of sales law. No claim to completeness. Information/descriptions and pictures are non-binding and do not constitute guaranteed characteristics.

Condition: used, Year of construction: 2017, operating hours: 9,979 h, Liebherr A914 Compact mobile excavator from year 2017 with only 9,979 operating hours! Itedpfx Asx Dpyxjddob ----* Manufacturer: Liebherr * Model: A914 Compact * Year of manufacture: 2017 * Recorded operating hours: approx. 9,979 * Including Oil Quick OQ65 SH quick coupler * German machine, first-hand * Including 1 x digging bucket * CE declaration + operating permit available * Good condition * ZSA * More photos and video on request * Price: €59,900, net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All details without guarantee or warranty, errors and prior sale excepted.

Condition: used, color: other, Year of construction: 2020, Serial number: 58157 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime.  All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   Isdpfx Adsxxxhujdjtb We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: excellent (used), Year of construction: 2023, operating hours: 1,198 h, Equipment: additional headlights, air conditioning, cabin, hydraulics, Hello I have for sale Liebherr L 538 in super condition. The production year of the machine is 2023 and the mileage is 1198 mth. Detailed information about the machine in the specifications in the gallery with photos. The price of the loader is without the bucket. The high loading bucket, as well as the bucket from the photo and the forks are listed separately in another ad. The price quoted is for export. Itodovgq D Ujpfx Addob

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Iodpfx Adjxvr Enedetb Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm MACHINE DETAILS Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Condition: good (used), Year 2003 Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Vertical machining with straight shaping head and synchronization Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Itsdpfot Utdpjx Addjb Control Liebherr PC-NC For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 10,666 h, Specifications Manufacturer: LIEBHERR Model: MK 88 Plus Condition: Used Stock number: 00075 Manufacturer: Liebherr Type: MK 88 Plus Year: 2015 Capacity (t): 8 tons Operating hours: 10,666 h Max. outreach / Max. boom length: 45 m / 2,200 kg Itodex Nqr Aopfx Addjb Max. hook height: 59.10 m Mileage: 35,658 km Main boom: 30 m Extras: Camera at boom, remote control

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules - Viscous damper The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: Iodpfx Adjx Huxuodjtb -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.

Condition: excellent (used), power: 200 kW (271.92 HP), operation weight: 27,500 kg, Year of construction: 2009, operating hours: 11,796 h, Equipment: air conditioning, Liebherr L576 Year: 2009 Operation hours: 11.796 Hrs ROPS Itjdpexnmz Ijfx Addsb Airco back drive camera tyres: 26.5R25 approx 60-70% good bucket with edge engine with 200kW CE / EPA operation weight: 27.5to.

Condition: excellent (used), color: other, Year of construction: 1987, operating hours: 19,498 h, Drivetrain Make of engine: Liebherr Functional Mast: lattice Mast length: 2.100 cm Lifting capacity: 45.000 kg Condition Technical condition: very good Visual appearance: very good Identification Serial number: 183001 Other information Delivery terms: EXW Production country: DE Additional information Please contact Christiaan Dekker for more information Itedpovivihefx Addsb Liebherr HS841HD Year: 1987 Hours: 19498 21 meter boom 16 ton free-fall winches + crane option ( ZHP 4.27) Liebherr 6 cylinder engine Hookblock + jibball Lifting computer hydraulic retractable undercarriage

Condition: good (used), functionality: fully functional, We offer a used Liebherr scraper, semi and fully automatic. Fully functional, with control system. Ijdperpmlrofx Addstb

Condition: used, Year of construction: 2007, Equipment: all wheel drive, Liebherr 524 Drive pump new! Chassis number: VATZ0438CZB016402 Z lift frame Year of manufacture: 2007 Liebherr 4-cylinder inline engine, water-cooled, with turbocharging and intercooler, 86 kW - 118 HP Version: 33 km/h - hydrostatic drive with 2 speed ranges * Quick coupler * Central lubrication system Itjdjxy Dz Aepfx Addsb * Air conditioning * 4 additional work lights on front cabin roof * 2 additional work lights on rear cabin roof * Rotating beacon on rear of cabin roof (warning light) * 2 crane lugs at rear Brakes: Self-locking hydrostatic drive acting on all 4 wheels plus hydraulic accumulator brake system with wet disc brakes in the differential housing (two separate brake circuits) Machine width: 2500 mm * Tyres 17.5 x 25 VA, 2 x 100% new * Tyres 17.5 x 25 HA, 2 x 100% new automatic self-locking differentials, 45% locking value on both axles * Drive pump new Purchase price with quick coupler and bucket: €31,900 net Export? Domestic plus 19% VAT. All prices are net plus 19% VAT. Viewing by appointment! Sale only to commercial customers or for export. Sold as seen, as-is condition. No guarantee or warranty. The indicated mileage or operating hours are read from the odometer or hour meter, and we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer, and the details provided are not to be considered as warranted characteristics. The description and information serve only for the general identification of the vehicle and do not represent a guarantee in the legal sense of sales law. No claim to completeness is made. The information/descriptions and images are non-binding and do not constitute warranted characteristics. Only the specifications in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are also happy to accept your vehicle in part exchange. For further questions, please contact us. For our international customers, we prepare all customs and export documents for trouble-free international transfer.

Condition: used, Year of construction: 2014, operating hours: 11,800 h, Equipment: all wheel drive, New arrival: Liebherr L 542 Z 2plus1 Chassis number: VATZ1269CZB035975 Year of manufacture: 2014 Operating hours (read off): approx. 11,841 Delivery date: 20.05.2014. Service history available on Liebherr central computer up to 27.09.2023 – 10,076 hours 4-cylinder inline engine, water-cooled, turbocharged, Emission Stage IIIB, 155 HP Permissible total weight approx. 17,000 kg, unladen weight approx. 15,000 kg Machine width: 2,500 mm Hydrostatic travel drive with 3-speed transmission Equipment: - Ride control - “Comfort” driver’s seat with pneumatic suspension (with seat heating) - Radio with CD and USB connection - 2 work lights at the rear driver’s cab roof - 4 work lights at the front driver’s cab roof - Automatic engine shut-off after 5 minutes at idle - 3rd hydraulic control circuit – proportional control via joystick - Pre-filter for engine air intake “TOP-AIR” - Automatic central lubrication system (Liebherr factory installation) - Access aid for easier cleaning of the windscreen - Lint screen in front of cooling package prevents radiator contamination - Coarse-mesh radiator for easier cleaning - Reversible fan for cleaning of the cooling package - Coolant pre-heating (with 220 V) - Sun visors front and rear - Tilting window left in driver’s door - Adjustable steering column (height and tilt) Isdpfoxy Dz Nex Addetb - Tilting window left in driver’s door - Tilt cylinder – piston rod protection - Reversing warning system (“beeper”), can be switched off - Provision for rotating beacon - Reversing camera Tyres: 20.5 x 25 L3 Front axle 2 – 95% tread, as new Tyres: 20.5 x 25 L3 Rear axle 2 – 95% tread, as new Offered with fixed mounted 2.8 m³ bucket – price: €43,900 net Optional equipment at extra cost: - Hydraulic quick coupler €3,550 (incl. conversion from fixed bucket to quick coupler bucket) - High-tip bucket from 3.0 m³ to 5.5 m³ from €4,950 - Bucket with clamp for QC, 3.0 m³ from €3,660 - Light material bucket 4 m³ €4,500 - 4-in-1 bucket 2 m³ on request - Pallet forks 5 or 8 tons from €1,990 - Available with used weighing system as well! Pfreundt WK 50 – €3,950 Printer for scale €850 All prices net export – domestic plus 19% VAT Sale to business customers or export only. Sale as is. No guarantee or warranty. The stated mileages or operating hours are those read from the meter; we do not guarantee their accuracy! Subject to prior sale. Vehicle description does not constitute a binding offer, and details are not to be considered as warranted characteristics. Description and information serve only for general vehicle identification and do not constitute warranty under commercial law. No guarantee for completeness. Stated details/descriptions and images are non-binding and not to be deemed guaranteed properties. Only those specified in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors.

Condition: ready for operation (used), Used Liebherr S800 gear hobbing machine, technical data see photos. Itodpextu Dhsfx Addob

Condition: used, Year of construction: 2014, Equipment: all wheel drive, Errors and prior sale excepted. Viewing by appointment only. WhatsApp inquiries will not be answered. Iedevpc Rrspfx Addotb

Condition: used, functionality: unexamined, machine/vehicle number: LGPv 1420, Used Liebherr Laboratory Freezer Manufacturer: Liebherr (Mediline) Model: LGPv 1420 Index 41C/001 Manufactured: 2016 Details: Capacity: 1427 litres External dimensions (W x D x H): 1430 x 830 x 2150 mm Ijdjxiw Uujpfx Addstb Internal dimensions (W x D x H): 1250 x 700 x 1550 mm Complete with 8 shelves, max. load 60 kg Temperature range: -10 to -26°C Energy consumption: 8.887 kWh/24h Dynamic freezing system with fan Automatic defrost With lock and on castors Door, steel-white Weight approx. 219 kg

Condition: excellent (used), Year of construction: 2002, operating hours: 49,220 h, functionality: fully functional, For sale is a beautiful LC 382 gear hobbing machine. The machine has been rigorously serviced by LIEBHERR and delivers outstanding tolerances. Max. workpiece diameter: 500 mm; max. module: 10; max. gear width: 350 mm; smallest machinable number of teeth: 4; milling head swivels +/- 45°; workpiece table load: 18 kN. Iedpexlzr Nsfx Addjtb

Condition: good (used), Year of construction: 2007, operating hours: 14,850 h, Drive: Wheel Empty weight: 16.000 kg Technical condition: good Visual appearance: good Serial number: K032803 Production country: DE Please contact Arco Boer for more information Liebherr A314 2 piece boom Itjdpfx Adow T Spcjdeb All hydraulics Blade quick coupler bucket AC Dutch road registration

Condition: good (used), Liebherr GKv 6460-20K with Umluftkühlung Der Liebherr Gastronormkühlschrank Gkv 6460-20 with Umluftkühlung is suitable for the Gastronorm GN 2/1 produced. Repairer: Liebherr ProfiLine Gastronormkühlschrank Gkv 6460-20K / 001 Automatic Abtauung Tür- und Temperaturalarm Digital Display Feuchtigkeit in 2 Stufen Dichtung wechselbar Schloss ohne Schlüssel Türanschlag wechselbar SwingLine Tür mit Stangengriff Stand füße high adjustment bar Weiße Roste, up to 60 kg Cleaning sablauf Fugenlos Innen weiß Kunststoff Gastronome GN 2/1 Ijdpfjxg Ihmox Addjtb Umluftkühlung Temperature range +1°C to +15°C °C Gross volumes: 663 liters Kühlmittel: R 600 a Connection: 220-240 V ~50 Hz Inner size (HxWxD) 1710 x 650 x 581 mm Dimensions (HxWxD) 2064 x 750 x 750 mm Height Stellfüsse: 150-180 mm Weight: 96.0 kg More articles - new and used - can be found in our online shop! International shipping costs on request!

Condition: excellent (used), Liebherr Gastronorm Refrigerator with Convection Cooling The Liebherr Gastronorm Refrigerator GKV 6460-20 is designed to fit the Gastronorm GN 2/1. Manufacturer: Liebherr ProfiLine Gastronorm Refrigerator Gkv 6460-20 Automatic defrosting Door and temperature alarm Digital display Ijdpfxsxg H Aio Addstb 2-level humidity control Replaceable seal Lock Reversible door hinge SwingLine door with bar handle Height-adjustable feet Galvanized shelves, up to 60 kg Cleaning system Seatless White plastic interior Gastronom GN 2/1 Convection cooling Temperature range +1°C to +15°C Gross volume: 663 liters Coolant: R 600 a Connection: 220-240 V ~50 Hz Interior dimensions (HxWxD) 1710 x 650 x 581 mm Exterior dimensions (HxWxD) 2064 x 750 x 750 mm Height of adjustable feet: 150-180 mm Weight: 96.0 kg Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1982, condition: ready for operation (used), Cutter speed: 250rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, indexing gear diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, cutter slide travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Documentation available. An on-site inspection is possible. Ijdoxq Eybjpfx Addstb