Used Long Bending Machine for sale (66,649)

Condition: good (used), Year of construction: 2001, Technical Data: Working width: 2050 mm Max. bending capacity for mild steel S235 (St40): 16.0 mm Max. pre-bending for mild steel S235 (St40): 13.0 mm Top roll diameter: 240 mm Diameter of side lower rolls: 220 mm Hjdpfx Aboyhbi Uodoi Diameter of middle lower roll: 240 mm Cone bending device Hardened rolls Swivelling control panel Hydraulic drop-end bearing CE marking Motor power: 11 kW Dimensions (L x W x H): approx. 4400 x 1800 x 1500 mm Weight: approx. 6 tons The seller accepts no liability for typographical or data transmission errors. The machine is in a condition – visually, technically, and regarding wear – appropriate for its age; used machines are sold without any warranty.

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Hjdpfxjxvdmdj Abdei Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: fully functional, Year of construction: 1988, control type: PLC-controlled, 3-roll plate rolling machine Manufacturer: FERRO Model: CIT - 1 Year of manufacture: 1988 Working range: 2000 x 6 mm Hydraulic swing-out bearing Cone bending device Hedpfx Abjyhdvqedoi

Condition: new, - Shaft diameter 50 mm Hsdper Ar Hvsfx Abdei - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control - Emergency stop - Documentation - 400 V

Condition: new, Year of construction: 2025, – Capacity 36 mm – Automatic and manual mode – 3 programmable bending movements Hsdpfx Abjydhl Iedoi – Foot pedal operation – Hardened bending tools – Emergency stop – Documentation – 400V

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm NC control Hjdpfx Absyg Euljdsi Upper roller diameter: 330 mm Middle roller diameter: 290 mm Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, The manufacture of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our experience and attention to our bending machines, thanks to which we can continue to improve our folding benches, so we don't forget who we really work for. The quality of our bending machines is very important to us. Bending machine ZGR-2140 / 1.2 Warranty: 12 months. Certificate CE Eccentric pressure that is shifted to both sides of the machine Working length: 2140mm STEEL SHEET 1.2 mm Non-ferrous metals 30% more sheet thickness Folding beam: 24 mm Hsdeb Na Eqepfx Abdsi Bending angle: 145 degrees Cutting along the entire working length, Lifting the upper cheek in three positions, maximum clear width between the side panels 80 mm rear frame for holding sheet metal, front cutter limiter to ensure the specified cutting width, We are looking forward to your contact!

Condition: ready for operation (used), Year of construction: 2020, Shaft bottom/top: 30mm/30mm, max. round tube length: 48mm, max. round tube diameter: 3mm, max. flat bar dimensions X/Y: 50mm/10mm, max. square tube dimensions X/Y/Z: 40mm/30mm/3mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Hsdpfsxt Rmrox Abdei

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Hodsxcx Atjpfx Abdsi

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Hodpfx Aeuwrv Debdsi

Condition: ready for operation (used), Year of construction: 2005, Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Hsdpfx Aboxwyw Iodji

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Hodpfx Abewwlkijdsi

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Hodpfjxl Up Uox Abdsi

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Hedpfx Aoycwtfebdei

Condition: ready for operation (used), A defective press brake Trumpf is available. Press force: 2000kN, bending length: 4080mm, ram stroke: 365mm, table-ram distance: 632mm, max. opening height: 535mm, angular adjustment: +/-10mm, throat depth: 410mm, frame distance: 3680mm, table width: 200mm, working height: 1050mm. Machine dimensions X/Y/Z: approx. 4650mm/2250mm/2900mm, weight: approx. 18000kg. The control board is defective. The machine is equipped with intact bending aids on both sides. Documentation available. On-site inspection is possible. Hodpfxsx I Rq As Abdoi

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Hsdotvar Iepfx Abdji

Year of construction: 1989, condition: ready for operation (used), An old folding machine Schröder is available. Working width: 2500mm, max. material thickness: 2.5mm, upper beam stroke: 80mm, adjustment: 160mm, speed: 120°/s, working height: 850mm, weight: approx. 3500kg. A visit on site is possible. Hsdpfx Aboxxa U Nedji

Condition: ready for operation (used), Year of construction: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Hsdpfx Aowg E Dhjbdsi

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Hedpfx Aorc Hiiobdoi

Year of construction: 2008, condition: ready for operation (used), A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible. Hodpfx Aexvrv Hobdji

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Hedpjx Sr Dfsfx Abdoi Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Year of construction: 2019, condition: used, functionality: fully functional, Profile and tube bending machine. Sets of rolls for pipes 1/2", 3/4" and 1". Hodeymmd Ispfx Abdsi

Condition: new, Year of construction: 2026, Timely delivery, trustworthy equipment ! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Prod-Masz offers you first class equipment. Convince yourself of our sheet metal bending machines. Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Price: 1.050 euros Hodpfxocgaa Ho Abdji Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with 23% of VAT.

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic Hodoivqrbspfx Abdsi design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Hjdpfjxcuicsx Abdji Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted