Used Angle Bending Machine for sale (68,302)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Bedpfx Abjzn Rdms Dedg Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel Bjdpfxszuzpyj Ab Dedg aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: new, Oil tank capacity: 60Bending capacity: (Flaches Material) 300x15Bending capacity: (Runde Rohre) 76x4,0pressure: 50working speed: 10Return speed: 10motor: 5.5table area: 600 x 1250working height: 930length: 1400width: 600heigth: 1500stroke: 285weight approx.: 1050 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. Bdodor I H A Uopfx Ab Dog With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, Oil tank capacity: 40Bending capacity: (Flaches Material) 200 x 18Bending capacity: (Runde Rohre) 60 x 4,0pressure: 30working speed: 10Return speed: 10motor: 3table area: 660 x 1250working height: 930length: 1250width: 650heigth: 1250stroke: 285weight approx.: 1050 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: Bedsr I H A Hopfx Ab Dsdg - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: like new (used), functionality: fully functional, Year of construction: 2007, FASTI TYPE 209 - 1600mm / Swivel bending machine incl. segment rail -CE marking -Working width 1620mm -Max. sheet thickness steel 3.0mm -Max. sheet thickness stainless steel 2.0mm -Max. sheet thickness aluminum 4.0mm -Upper die stroke / Manual / Handwheel -Bending die / Manual -Clamping / Mechanical -Manual bending / Angle adjustment -Additional SEGMENT BENDING RAIL -Various accessories (see pictures) -Application / Precision bending of steel / stainless steel / aluminum -Manual back gauge -Documentation Dimensions: L x W x H 2.9 x 1.6 x 1.7 meters / Weight 1800 kg Errors and omissions excepted Bdjdpfjzwqtgsx Ab Djg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Bdedpfjwk Rlxsx Ab Dsg Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: ready for operation (used), Year of construction: 2009, ERCOLINA MB 42 / Mandrel-less pipe bending machine Bjdpfxsznm Nfe Ab Dodg -CE marking -Year of manufacture: 2009 -Bending capacity / steel pipe: 42.4 x 3 mm -Max. pipe diameter, aluminum / copper: 54 x 2 mm -Bending capacity, furniture construction pipe: 48 x 1.5 mm -Solid material up to 30 mm -Max. bending angle: 210 degrees -Electronic control with digital display -Max. 30 program memory slots -Programs with 9 bending operations -Overload protection / Yes -Operation: Dual foot pedal (bending - return) -Max. bending speed: 2 bends/min -Includes 1 tool -1.1 kW -Foot switch -Documentation Dimensions: L x W x H 0.5 x 0.6 x 1.2 meters / Weight 100 kg Errors and omissions excepted.

Condition: new, Oil tank capacity: 40Bending capacity: (Flaches Material) 200 x 18Bending capacity: (Runde Rohre) 60 x 4,0pressure: 40working speed: 10Return speed: 10motor: 3table area: 660 x 1250working height: 930length: 1250width: 650heigth: 1250stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials Bdsdpfxjr I H A Re Ab Dog like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine Bodedy Rhdjpfx Ab Dsdg -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: It is a small but very versatile machine. Capabilities for mild steel: *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") - *Round solid bar:* 30 mm max - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) - Bending speed: 8.5 m/min Bdsdjzwg Rzspfx Ab Dsg - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: new, Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 15Bending capacity: (Runde Rohre) 114 x 8pressure: 80working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to Bodpsr I H Dcsfx Ab Dodg perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: used, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm BPR Brescia – Model C-602-HE, hydraulic 3-roll profile and pipe bending machine Technical Data BPR C-602-HE Specifications Manufacturer BPR – Brescia, Italy Model C-602-HE Bdjdpfx Abjzu A U De Dog Type Hydraulic 3-roll bending machine Operation Horizontal and vertical Number of rolls 3 Roll diameter 100 mm Shaft diameter 60 mm Shaft length 150 mm Max. roll spacing (center-to-center) 400 mm Motor power 2.2 kW Mains voltage 380 V Dimensions approx. 850 × 1,120 × 1,700 mm Weight approx. 1,100 kg Hydraulic feed Yes Rotation direction Clockwise/counter-clockwise Information subject to change / without guarantee

Condition: new, Oil tank capacity: 12Bending capacity: (Flaches Material) 200 x 12Bending capacity: (Runde Rohre) 48 x 4,0pressure: 20working speed: 10Return speed: 10motor: 2.2table area: 480 x 1060working height: 930length: 1150width: 480heigth: 1200stroke: 185weight approx.: 530 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, Bdedpfx Absr I H A Ao Dog straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Bdjdjyx A Uujpfx Ab Deg Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: new, pressure: 100Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 24Bending capacity: (Runde Rohre) 114 x 10pressure: 285working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  Bdjdpfsr I H Axjx Ab Dsg - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) Bdsdezichajpfx Ab Dsg 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: used, Year of construction: 2004, sheet width 1550 mm Bdjdpfx Aezxt Txjb Dog plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 Bdjdpozxkyvofx Ab Djg TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Bdedpfx Abepu R Nvo Dog Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: good (used), Year of construction: 2019, *Title:* SAY-MAK SPK-35 Motorized Profile Bending Machine - 2019 - 0.75kW *Description:* For sale: motorized roller bending machine, brand *SAY-MAK*, model *SPK-35*. *Features:* - *Year*: 2019 - Serial No.: 290367 - *Motor*: 1.5 kW Bdsdpjzr Rcwefx Ab Deg - *Power Supply*: 400V Three-phase - *Weight*: 400 kg - *Application*: Bending round/square tubes, flat bars, angles, profiles - *Controls*: Foot pedal + Emergency stop - *Condition*: Very good condition, 2019 machine Perfect for metalwork, locksmithing, railings, canopies, and boiler making. Robust machine, from a renowned Turkish brand. Rollers included.

Condition: used, Year of construction: 1980, total length: 1,500 mm, total width: 1,400 mm, total height: 1,400 mm, Colour: Green Empty weight: 2.500 kg Price: On request - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 802315 - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 5.5 - Shaft diameter [mm]: 105 Bodpfxjzx Undj Ab Dsdg - Moment of resistance [cm³]: 30 - Top roll diameter [mm]: 275 - Bottom roll diameter [mm]: 275 - Capacity diameter round [mm]: 60 - Options: Extra rolls - Transport dimensions: 1500mm x 1400mm x 1400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Bdodpfetr U Hljx Ab Deg Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools -CE marking Bdsdpfoznu Sbox Ab Djg -Bending range 42x3mm -Hydraulic drive -Manually adjustable angle switch -Digital display -Adjustable stroke -Emergency stop function -Three sets of tools: 33.7 mm / 26.9 mm / 21.3 mm -Documentation -400 Volt connection Dimensions: L x W x H 1.1 x 0.7 x 1.5 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bedezh I Iiepfx Ab Dsdg Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Year of manufacture: 06/1994 Bsdjy D A Hnopfx Ab Dsdg Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Condition: Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Special features: High-quality machine made in Sweden Excellent build quality Industrial-grade design