Used Loop Machine for sale (65,181)

Condition: new, Year of construction: 2026, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 1,500 mm, Machine configuration ROTAMILL 2819 - NC Rotary table, Ø1.800 mm - NC Fork-type Milling Head M-SERIES (A- and C-axis) - Milling spindle CST-42-180-S - Tool chain magazine, 54 pockets, HSK-A(T)63 - Chip conveyor - NC Control HEIDENHAIN TNC 640 - Technology package turning - 2-fold head change magazine, fully automated - Preparation of the machine for wet machining - Oil mist extraction unit, approx. 3.000 m³/h - Workpiece measuring touch probe BLUM TC 60 - Tool measuring, BLUM LaserControl Single NT - Kinematic 3D-calibration software - Heidenhain - Kinematic tool kid - CAD-Import (.step; .iges; .dxf) - Remote diagnosis (Teleservice) - Operator and maintenance training (1 day) excl. travel cost and expenses - Loading and (seaworthy) packing charges, FCA Jülich as per Incoterms 2020 - Installation and run-off inside Germany incl. travel costs and expenses OPTIONAL - Coolant unit Technical data - Traverses X-axis = 2,800 mm - Traverses Y-axis = 1,900 mm - Traverses Z-axis = 1,500 mm - Portal clearance (roof)- width (Y) = 2,250 mm - Portal clearance - height (Z) = 1,465 mm - Total weight, approx. = 41,000 kg - Feed rate in X, Y and Z = 50 m/min - Acceleration in X, Y and Z = 4 m/s2 - Feed force in X, Y and Z = 10.000 N Laodpotwatdefx Ab Neh Rotary NC-Table Rotary table (C1-Axis) - Face plate, standard = Ø 1,800 mm - Interference diameter = Ø 2,200 mm - Payload – milling, max. = 6,000 kg Drive C1-Axis – turning table HT - Swivel range = 360° (endless) - Rotational speed, max. = 30 rpm - Torque, max. = 7,473 Nm - Clamping moment = 13,000 Nm Fork type NC-Milling-Head M-SERIES (A-Axis) Drive A-Axis - Swivel range = ±110° (60 rpm) - Speed, max. = 100 rpm - Feed rate, max. = 600°/s - Nominal moment = 840 Nm - Clamping moment = 4,000 Nm Drive C2-Axis - Swivel range = ±360° - Speed max. = 65 rpm - Feed range, max. = 390°/s - Nominal moment = 1,020 Nm - Clamping moment = 4,000 Nm Milling spindle CST-42-180 S - Power, S1 (S6-40% ED) = 42 (53) kW - Nominal moment = 2,000 rpm - Torque, S1 (S6-40% ED), max. = 201 (253) Nm - Speed, max. = 12,000 rpm - Motor type = synchron/8-pole - Tool holder = HSK-A63 - Clamping system = hydraulic - Clamping force = 20 kN - Installation dimension, stator = Ø 180 mm - Spindle nose, length = 110 mm Accuracies according to VDI / DGQ 3441 - P (X,Y,Z) = 0,012 mm - P (C, A) = 5" - Ps (X,Y,Z) = 0,008 mm - P (C, A) = 3" Tool chain magazine with double arm gripper - Tool pockets = 54 - Tool holder = HSK-A(T)63 - Pocket distances = 110 mm - Tool diameter, fully loaded = Ø 105 mm - Tool diameter, max. = Ø 150 mm - Tool length, max. = 300 mm - Tool weight, max. = 8 kg Footprint & Weight - Length (X) = 6,830 mm - Width (Y) = 6,970 mm - Height (Z) = 5,150 mm

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Lodpfxozii A Ds Ab Noah Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Lasdozii Dnspfx Ab Njh Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Laodpfxjzix Nmj Ab Neh Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Laodpfx Ajzfy Iveb Njh Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Laedpextaxwjfx Ab Njh Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, operating hours: 23,273 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 1,400 mm, workpiece width (max.): 900 mm, workpiece height (max.): 240 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 13,200 kg, spindle motor power: 32 W, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Lodpfxez S Uddo Ab Nsah Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Max. Tool Length mm: 300 Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Condition: used, mileage: 1,572 km, power: 265 kW (360.30 HP), first registration: 06/2026, fuel type: diesel, tire size: 315/60R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: beige, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,600 mm, total width: 2,550 mm, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Roof spoiler - Remote-controlled central locking - Lift axle - Air suspension - Radio - Sun visor - Tool box = Notes = New, unused truck. All-round air suspension. Lsdpjzd U Nlofx Ab Neah New galvanized loading platform. Hardwood floor. Recessed lashing eyes Hydraulic ramps. Hydraulic ramps can be slid against each other. Stainless steel boxes. Work lights. 3,500 kg trailer coupling. Loading platform length: 725 cm. Loading platform height: 107 cm. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Tire size: 315/60R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 1: Dual tires; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 2: Steered; Tire tread depth left: 100%; Tire tread depth right: 100% Weights Unladen weight: 10,788 kg Payload: 15,212 kg GVWR: 26,000 kg Identification Model number: ACTROS 2536 6X2 / OPRIJ / MACHIN = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Lsdpez S T Insfx Ab Nsah Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, operating hours: 19,402 h, total height: 2,250 mm, total length: 2,500 mm, total width: 1,900 mm, Year of manufacture: 2015 Colour: White Empty weight: 1.600 kg Price: On request - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AB/224221 - Operating hours: 19402 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 1 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 5.6 - Type milling table: Flat table - Tool holder: ISO30 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 11 - Saw unit present: Yes - Tool changer positions [pcs.]: 0 - System/software: SCM Maestro - Safety feature: Door interlock switches, Safety light curtain - Tools included: Yes - CNC options: Manual control, Barcode reader Lajdpfxszmvfts Ab Neh - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 3960 - Table width [mm]: 840 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Z-axis working range [mm]: 60 - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 10.0 - Installed length [mm]: 4500 - Installed width [mm]: 1900 - Installed height [mm]: 2250 - Transport dimensions: 2500mm x 1900mm x 2250mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1985, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 315 mm bore stroke 180 mm turning speeds 130 - 3500 U/min table-size 615 x 470 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 mm/U spindle taper MT 4 MK engine output 2.0 / 2.4 kW weight 450 kg range L-W-H 800 x 650 x 2100 mm Features: - Heavy-duty column drill press - With extended column (200 mm) - Drive: "VARIO" V-belt * Continuously variable speed control - automatic spindle feed (0.1/0.2/0.3 mm/rev) * with electromagnetic engagement - pole-changing motor - clockwise rotation of the drill spindle - adjustable fixed drill depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Machined base plate - Coolant system in the machine base - Machine light Ledjz S N Drjpfx Ab Noah - Emergency stop button on the front - Operating instructions (PDF)

Condition: good (used), Year of construction: 2001, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 55.0 mm throat 335 mm bore stroke 200 mm bore spindles - Morse Taper MK 4 turning speeds 60 - 1.530 U/min Lasdpfxjz S N Dxo Ab Neh table: 740 x 620 mm feed 0.15/0.2/0.3/0.36 mm/U total power requirement 2.6 / 3.1 kW weight of the machine ca. 850 kg range L-W-H 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition (!!) Features: - Heavy-duty/robust bench-mounted drill press - Drive: "VARIO" V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots * Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâ??s manual

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lajdpfox Hwhxox Ab Nsh Yorick Diebels

Condition: used, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Year of manufacture: 2015 Colour: White Empty weight: 1.240 kg Lajdpfx Abezavvgj Njh - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 519,780 km, power: 353 kW (479.95 HP), first registration: 09/2020, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,720 mm, total width: 2,550 mm, loading space length: 8,000 mm, loading space width: 2,550 mm, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Remote central locking - Refrigerator - Lift axle - Air suspension - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Stationary air conditioning - Toolbox = Notes = New loading platform. Galvanized. Hardwood floor. Hydraulic ramps. Hydraulically adjustable for close contact. Recessed tie-down eyes in the floor. Stainless steel boxes. Loading platform length: 800 cm. Loading platform height: 109 cm. = Further Information = Technical information Number of cylinders: 6 Axle configuration Lsdpfx Abozku E Ts Neah Tire size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steerable; Tire tread left: 75%; Tire tread right: 75% Rear axle 1: Dual tires; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60% Rear axle 2: Tire tread left: 45%; Tire tread right: 45% Weights Unladen weight: 12,040 kg Payload: 14,960 kg GVW: 27,000 kg Identification Model number: XF 480 6x2 / OPRIJ - MACHINE TRA = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Year of manufacture: 2022 Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 Ledjzwul Hopfx Ab Nsah - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Year of manufacture: 2014 Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick Ledpfex E Uk Uox Ab Noah - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Lodpfezkudcox Ab Neah VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 2,700 mm, total height: 2,900 mm, total length: 1,700 mm, Year of manufacture: 2003 Colour: White Empty weight: 3.000 kg - Year: 2003 - CE marking present: Yes - Serial number: 0312101 - Drive system: Conventional - Wet/dry: Dry - Number of stations [pcs]: 1 - └ Station type 1: Abrasive belt - Power [kW]: 32 - Max. working width [mm]: 550 - Transport dimensions: 1700mm x 2700mm x 2900mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Lasdozkkd Sspfx Ab Noh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Year of manufacture: 1972 Colour: Green Empty weight: 2.000 kg Price: On request - Year: 1972 - Control: Conventional - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) Laedpszm N Riefx Ab Njh - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Year of manufacture: 1996 Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Serial number: 11676-FBZ - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 4000 - Y-axis travel [mm]: 935 - Z-axis travel [mm]: 1000 - Table length [mm]: 4500 - Table width [mm]: 800 - Tool holder: ISO50 - Max. spindle speed [rpm]: 3000 - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg - Transport packages [pcs.]: 1 Financial information Laedpfxoz R N Dds Ab Neh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 2,000 mm, total width: 1,600 mm, total height: 2,350 mm, Colour: White Empty weight: 3.000 kg - Drive system: Conventional - Model: vertical - Number of axes [pcs]: 3 - Power [kW]: 5.5 - Max. stroke [mm]: 250 - Max. reach [mm]: 365 - Table diameter [mm]: 500 - Table length [mm]: 500 - Table width [mm]: 500 - Table depth [mm]: 500 - X-axis travel [mm]: 560 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 250 - Min. stroke speed [rpm]: 22 Lsdpfxsz R Dr Ue Ab Neah - Max. stroke speed [rpm]: 112 - Transport dimensions: 2000mm x 1600mm x 2350mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, functionality: fully functional, center height: 180 mm, total width: 1,650 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 3,900 kg, grinding length 1500 mm centre height 180 mm weight of the machine ca. 3,9 t Lasdpfx Aswm Rqgjb Njh dimensions of the machine ca. L: 4900 x 1650x 1800 m

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, !! This machine comes with a donor machine that can be used for spare parts. !! The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Applications: Lsdpsy N Ahcsfx Ab Njah Widely used for bonding, sealing, gluing, and gasket making in the automotive and packaging industries. Benefits of FoamMelt Technology Faster Curing: The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to the gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators.

Condition: used, Doka-Framax Xlife formwork - New price: Net €514,000.00 Lsdpfx Aj Acf Umob Noah - Starting price: €58,000.00 - Detailed information can be found under the photos.