Used Magnetic Stirrer for sale (2,035)

Condition: new, Rexroth MDD093C-F-030-N2L-110GA2 3-phase permanent magnet motor, part number: R911258045, serial number: 7162006000401, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Hedpei D Nhhsfx Anlst

Condition: ready for operation (used), Siemens 1FT3063-0AK61-9 - Z Permanent Magnet Motor, Z = see nameplate, serial number: E9M81265502001. This motor was completely overhauled by Siemens and then stored for a long period. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Hsdpfx Anei D Rwyelet

Condition: new, Siemens 1FT5032-0AC01-1-Z permanent magnet motor, Z = see nameplate, serial number: EF593898704001, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Hodpoi D Rxaefx Anlet

Condition: new, Siemens 1FT5044-0AF01-1-Z Permanent Magnet Motor, Z = see nameplate, Serial No.: EF593898710001, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Hjdpji D R A Tefx Anlot

Condition: ready for operation (used), Siemens 1FT5062-0AC01-0 - Z Permanent Magnet Motor, Z = see nameplate, serial number: E0Y60054601010. This motor was completely overhauled by Siemens and then stored for a long period. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Hedpfsi D R I Rjx Anljt

Condition: ready for operation (used), Siemens 1FT5064-0AC01-1 – Z Permanent Magnet Motor, Z = see nameplate, serial number: AAU9827071Z0000. The motor has been fully overhauled by Siemens and subsequently stored for a long period. Used, shows normal signs of wear, 100% functional. Scope of supply as shown in the photos. Hodpfx Aei D R Suonlst

Condition: ready for operation (used), Siemens 1FT5064-0AG01-2-Z Permanent Magnet Motor, Z = see nameplate, serial number as per photo, used, normal signs of wear, 100% functional, scope of supply as per photos. Hedji D R U Tjpfx Anlot

Condition: ready for operation (used), Siemens 1FT5066-0AF01-2 – Z Permanent Magnet Motor, Z = see nameplate, SN: E9M82131302001. The motor was completely overhauled by Siemens and then stored for a long period. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Hedpoi D Sfgsfx Anlet

Condition: ready for operation (used), Siemens 1FT5071-0AF01 – Z Permanent Magnet Motor, Z = see nameplate, SN: E7D81304901007. This motor was completely overhauled by Siemens and then stored for a long time. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Hsdei D Spqjpfx Anljt

Condition: ready for operation (used), Siemens 1FT5074-0AC01 - Z Permanent Magnet Motor, Z = see nameplate, SN: E5E86575801005. The motor was completely overhauled by Siemens and then stored for a long time. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Hsdpoi D Svlofx Anljt

Condition: good (used), overall weight: 41,000 kg, Year of construction: 2004, operating hours: 5,500 h, Single-toggle jaw crusher Inlet: 1,000 x 650 mm Finished product: approx. 0/70-0/200 mm Feed hopper, vibrating feeder Electric drive with 220 kVA generator Side and main discharge conveyor Overhead magnet Hjdpfxjtpakts Anlot

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Belt width: 800 mm Hodpjtql S Tofx Anljt Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub Hjdpfjtqqm Asx Anljt vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min grinding spindle speed 1450 U/min grinding spindle drive 5,6 kW table load capacity max. 1000 kg dimensions of machine L x W x H 3,2 x 2,17 x 2,47 m total power requirement 10 kW weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter

Condition: excellent (used), Year of construction: 2020, Gear motor, electric motor, electric gear motor, stainless steel motor, stainless steel gear motor, stainless steel bevel gear motor, permanent magnet synchronous motor Hedpfxerqinmo Anlst -Manufacturer: Bauer, adjustable stainless steel gear motor -Note: Frequency converter required -Type. SNFA5E09XA4-TF/VA-TM -Engine: speed 150-1500 rpm -Power: 1.1 kW -Hollow shaft: Ø 38 x 1750 mm -Protection class: IP65 -Dimensions: 645/200/H220 mm -Weight: 53 kg

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding Hodpfoh D H Rcsx Anlst -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² Hedpfx Ansinwwzeljt •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: good (used), Used stainless steel reactor with magnetic stirrer Item number: 10461 Last application: Cosmetics Volume: approx. 80 liters Type: Standing on 3 legs Material (in contact with media): 1.4404 stainless steel Design: Single-walled Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: -1 / +3 bar Operating temperature: 95°C Dimensions of the container: Outer diameter: 610 mm Height of legs: 1730 mm Distance from drain to bottom: 1620 mm Overall height: 2450 mm Overall width: 760 mm Overall length: 610 mm Materials: Hsdpfofcixrox Anlot Inside: 1.4404 / AISI316 Outside parts: 1.4301 / AISI304 Equipment: Magnetic stirrer Load cells Outlet: DN50 mm Manhole: 200 mm Spray head Various connections Various accessories

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm Hjdpfx Aodubpuonlst * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: new, New electromagnetic friction clutch with X/Y/Z feed for tool milling machines from the TOS/INTOS Žebrák production line, models FNG/FNGJ/FNGP. Please specify the exact machine type when making inquiries. Other spare parts are also available. Hjdpfodx Rfiox Anlet

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. Hsdpfjdy Hrdsx Anljt - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap Hjdpsn Smclofx Anljt - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: new, Year of construction: 2026, machine/vehicle number: 307.101, *SUITABLE FOR PARBOILING VARIOUS MEAT PRODUCTS, FRYING AND MELTING CRACKLINGS, COOKING JAMS GULASHES SAUCES AND SOUPS. *CONTINUOUS STIRRING AND INDIRECT HEATING PREVENT FOOD FROM OVERHEATING *THE BOILER FEATURES DOUBLE WALLS AND DOUBLE BOTTOM CLAD WITH INSULATION AND AN OUTER COVER *DIGITAL TEMPERATURE SETTING *TRANSPORTED ON CASTERS *A TAP IS INSTALLED FOR THE DRAIN *EASY TO CLEAN AND USE Hedpfx Aopz Ht Tsnlot *THE CONTAINER IS COVERED WITH A LID REMOVABLE STIRRER. WE OFFER 3 TYPES: KM 130, BOILER 130L, CODE 307.101 MAX. TEMPERATURE TILL 200° C, MEASUREMENTS 1000X830X1250MM, WEIGHT 142 KG, 12,5 kW, 400 V KM 170, BOILER 170 L, CODE 307.102 MAX. TEMPERATURE TILL 200° C, MESAUREMENTS 1050X970X1170 MM, WEIGHT 155 KG, 12,5 kW, 400 V KM 250, BOILER 250 L, CODE 307.103 MAX. TEMPERATURE TILL 200° C, MEASUREMENTS 1150X1140X1250 MM, WEIGHT 189 KG, 18,5 kW, 400 V

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2016. The Miltenyi Biotec CliniMacs Plus Instrument P/N 44085 is a cell separation system designed for clinical-scale enrichment of target cells or depletion of unwanted cells from blood products. It automates cell separation in a sterile system, enabling the separation of target cells from unwanted cells and collecting the fractions in different bags. The system is widely applicable in regenerative medicine, adoptive immunotherapy, and graft engineering. It magnetically labels cells in the Cell Preparation Bag and separates them, providing high purity and excellent yield. With optimized protocols, the system combines reproducibility with ease of use. Specifications: Dimensions: 70cm x 60cm x 90cm (w x d x h) Weight: Approximately 35 kg Input Voltage: 100-240 V~ Power Consumption: 350 W Monitor: 10.1 TFT Touchscreen Types of Starting Material: Leukapheresis, bone marrow Processing Steps: Cell depletion and enrichment via magnetic cell separation Hsdpfxjt E Hl Ij Anlot Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road - Metalworking - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty - Patented magnetic switch for quick, pulsation-free stroke change Hjdsbu Dzispfx Anljt - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 11176, We are offering this used CemeCon CC 800/9 HIPIMS Magnetron Sputtering PVD System, year of manufacture 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Weight: 3,000 kg Protection rating: IP 20 Power rating: 166 kVA Evaporators: 6 Voltage: 3x400/N/PE V Frequency: 50/60 Hz Cemecon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, 2 also HIPIMS capable - Booster anodes - 4 gases, 1 of which is flammable - BIAS: DC, MF-pulsed, or HIPIMS - 3x heating - 2 turbo pumps - 6-position substrate holder - Multiple targets - Includes option for BNC terminal for Peak I, U, and P at HIPIMS cathodes + BIAS - Extensive accessories such as loading material, spare parts, consumables - In 07/2023, the system control was upgraded to the latest standards and a manufacturer service was performed. A bundle option is also available including a chiller, a precision substrate cleaning system, and a lapping/polishing machine. Hjdpfxsx Tt T Rj Anlot If you have any questions or require further information, please feel free to send us a message or call us.