Used Magnum for sale (74)

Condition: excellent (used), Year of construction: 2006, operating hours: 14,300 h, functionality: fully functional, machine/vehicle number: 414-46, Year 2006 with Fanuc Series 18i-MB5 Country of manufacture: CE - Germany Net machine weight: 3,400 kg Dimensions: 185x259x250 cm TECHNICAL SPECIFICATIONS Travel X / Y / Z: 450 / 270 / 310 mm Acceleration X / Y / Z: 0.7 / 0.7 / 1.0 g Rapid traverse X / Y / Z: 40 / 40 / 60 m/min Spindle speed max.: 15,000 rpm Tool interface: HSK A 40 Milling capacity in St 60: max 60 cm3/min Drilling capacity in St 60: max Ø 16 mm Threading: up to M12 Tool magazine / positions: 24 – special version with 40 on this machine Hedpfx Adjxqmwbjdong Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.2 sec 5-axis version NC rotary tilting table: +/- 100° Rotary plate diameter: 100 mm Grid drill pattern: M6 x 50 mm 4th axis speed: 40 rpm 5th axis speed: 60 rpm Direct measuring system for 4th and 5th axes: +/-20’’ / +/-20’’ Distance spindle nose – table surface: 170 – 450 mm Maximum workpiece weight: 6 kg Technical information is provided without engagement and subject to errors or omissions.

Condition: used, Year of construction: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control Heidenhain TNC 640 swivelling range -98 bis 98 Grad rotary table dia. 750 mm total power requirement 29 kW weight of the machine ca. 16 t Hedelius traveling column machining center Tiltenta 7 Magnum with continuously swiveling main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-fold tool magazine and NC rotary table integrated into the fixed machine table. Machine equipment: T7M-3200, operating mode 3 -Pressure booster pump 50 bar -Heidenhain TNC 640-T series -Spindle speed 12000 rpm/29.0 kW -Extended swivel range TNC/T -HR 510 handheld control unit -SK40/190 standby magazine -Cone cleaning station Hsdpfswfqqksx Addsng -900 l slant bed coolant system -25 bar internal coolant supply -Slant bed coolant system prefilter -Electrostatic exhaust air filters T / 2x1300 -Compressed air nozzle on spindle head -Internal compressed air supply -Blow-off guns -Rinsing guns -Infrared receiver M&H 91.40 -3D infrared measuring probe M & H 25.50 -Toolsetter M&H 35.70 -Workspace partition T7 with slider Control on: 33163:56:22 Machine on: 24185:07:21 Program run: 16784:12:57 Spindle: 11751.13.08

Condition: used, mileage: 291,681 km, power: 210 kW (285.52 HP), first registration: 06/2014, fuel type: diesel, empty load weight: 17,360 kg, maximum load weight: 8,640 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, color: white, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, loading space volume: 22 m³, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, traction control, Zöller Magnum XXL 22 with Zöller type 00179 tipping device for 120/240/1,100-liter bins and pocket containers, trailing steering axle. Non-binding offer—subject to change and prior sale. Sale takes place with exclusion of any warranty. All information provided without guarantee! Hnedpjx Ec Acjfx Addeg

Condition: used, Year of construction: 1995, Year: 1995 Controller: Fanuc 0M TECHNICAL DATA X-axis travel: 550 mm Y-axis travel: 300 mm Z-axis travel: 280 mm Table size: 950 x 370 mm Spindle speed: 20 - 10,500 rpm Spindle: SK40 Tool magazine: 12 positions GENERAL Service book: Yes Working hours: Control language: German Spindle power: 5.5 kW Dimensions: 3 m x 2.4 m x 2.5 m Weight: 3,000 kg OTHER Payment and delivery: On request Additional information: Chip conveyor Hnjdpfox Syb Sex Addog

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 390 mm, spindle bore: 116 mm, turning diameter: 635 mm, turning diameter over bed slide: 390 mm, turning length: 2,000 mm, Used lathe in very good condition, including a 400 mm 3-jaw chuck, 1 x steady rest and a Multifix toolholder. Technical specifications: Turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 390 mm Swing in gap: 900 mm Spindle bore diameter: 116 mm Hnjdpex Eln Rofx Addog Total weight: 4230 kg Chuck mounting: D1 11 in. Camlock Morse taper: No. 6

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Hnjdpjxx U Nzofx Addsg

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 1920 mm Measurements depth 3143 mm Measurements height 3000 mm Machine weight 5500 kg Control Unit Brand SIEMENS Model SINUMERIK 810M Main Drive Spindle speed range 10500 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 750 mm Y-Axis Movement 400 mm Z-Axis Movement 600 mm Media Hsdpfx Adsx D Hmisdeng Power consumption 29 kVA This CHIRON FZ 18 W MAGNUM HIGH SPEED, manufactured in 1998, is equipped with a Siemens Sinumerik 810M CNC controller, a 1240 × 850 mm worktable, and travels of 750/ 400/600 mm in the X, Y, and Z axes. The machine is still connected and in very good technical condition. If you are looking for high-quality milling capabilities, consider the CHIRON FZ 18 W MAGNUM HIGH SPEED we have for sale. Contact us for more information. Application Types Milling

Condition: used, operating hours: 15,418 h, mileage: 113,474 km, power: 206 kW (280.08 HP), first registration: 07/2012, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 8,500 kg, empty load weight: 9,500 kg, wheelbase: 3,620 mm, brakes: other, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, cabin, compressed air brake, cruise control, differential lock, fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, * German vehicle * From first owner * Genuine mileage only 113,474 km and 15,418 operating hours * Condition: See photos * SCARAB MAGNUM Hydrostatic * Disc brush on the right and central roller brush * SWEEPING WIDTH: 2365 mm single sweeping * Debris container 7.2 m³ with V2A stainless steel floor pan * Container tipping for emptying, controlled with cable remote control * Water tank 1,800 liters * Street washing system * High-pressure cleaner with lance on hose reel * Hydrostatic drive during sweeping * Sweeping speed from 0 to 32 km/h * Scarab CANbus control console displaying operational information, with data recording and self-diagnosis functions * Multifunction steering wheel * 6-speed manual transmission * Cruise control * Driver & passenger comfort seats, air-suspended * Seat heating * Electric windows * Electric mirrors * Rear view camera * Rear maneuver coupling * Beacon * Radio CD * Central lubrication system * Differential lock * Bluetooth phone connectivity * ABS and ASR * Leaf and air suspension with lifting and lowering function * Sun visor Hodpfx Aexwx U Esddeng * Wheelbase: 3,620 mm * Gross vehicle weight: 18,000 kg * Unladen weight: 9,500 kg * Payload: 8,500 kg * Self-propelled road sweeper If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer generally excludes new TÜV inspection, new DGUV, new SP, and new UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the goods to avoid any misconceptions about their condition and suitability on the part of the buyer. Viewing and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, mileage: 1,118,000 km, first registration: 02/2007, fuel: diesel, gearing type: mechanical, emission class: euro5, Year of construction: 2007, Three-axle tractor unit, French-style sliding curtain body, rear doors, manual gearbox, 1,118,000 km, payload 13,800 kg, steerable third axle + Austeras biga trailer, year 01/2007, French-style sliding curtain, rear doors, payload 14,950 kg Hodpfox Hvpnex Addjng Price shown above plus 22% VAT and transfer of ownership costs.

Condition: used, Year of construction: 2008, machine/vehicle number: 7281, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm Hodpfxotz Dgze Addjng - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Hedpfewycmmex Addeng Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels Hnedpfjwya Stox Addsg -Manufacturer: Solideal, solid rubber tires Magnum with rim -Tire size: 18x7-8 -Bolt circle: Ø 140 x 18 mm -Recess: Ø 100 mm -Number: 2x tires available -Shipping/Price: complete -Dimensions: Ø 380 x 160 mm -Weight: 23 kg/pcs

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 29000 kg Main Drive Hnedpox D Im Rsfx Addsg Spindle Speed 6000 RPM Number of axis 5 Movement X-Axis Movement 3500 mm Z-Axis Movement 770 mm Y-Axis Movement 1000 mm This 5-axis HEDELIUS RS 100 K MAGNUM was manufactured in 2009. It features a travel range of 3500 x 1000 x 770 mm and a rotary-tilting table with a 1200 kg max workpiece weight. The spindle operates at speeds up to 6000 rpm, and the machine includes a 50-tool capacity magazine. If you are looking to get high-quality milling capabilities, consider the HEDELIUS RS 100 K MAGNUM machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1998, condition: good (used), Zoller V520B Magnum Setting and Measuring Machine Manufacturer: Zoller Type: V 520 Magnum Year of manufacture: 1998 Technical specifications: Voltage: 230 V Compressed air: 4-6 bar Weight: 180 kg Under-table weight: 140 kg Maximum tool weight: Manual focusing: max. 1000 N Automatic focusing: max. 200 N Find more items - new and used - in our shop! Hnsdpfx Ajicaxqjddsg International shipping costs upon request!

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, This is a 115-liter MAGNUM 3/1 GN electric braiser from premium manufacturer MKN, model Optima 850. The braiser is a multifunctional appliance for steaming, boiling, simmering, braising, and roasting. Draining is done via a safety drain valve on the front. The appliance has been tested in our in-house workshop and is fully functional. The braiser has been completely overhauled and is in excellent condition. The stated price is net plus 19% VAT. Our used appliance service for you: • 6-month warranty on all electrical parts • High-quality brand-name appliances at fair prices • Professional overhaul/inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or pickup options • Expert advice - before and after purchase • Provision of operating instructions, wiring diagrams & spare parts • Tested according to DGUV V3 Technical specifications: • W x D x H: approx. 1300 x 850 x 850 mm • Inner tank W x D x H: 700 x 540 x 250 mm • Power supply: V: 400 / kW: 19.2 • Serial number: 11203758 • Type: 2022705 • Year of manufacture: 2011 • Nominal capacity: 115 liters Condition: Used, fully Functional Further information: •Multifunctional cooking appliance for steaming, boiling, simmering, braising, and frying •Braising pan made entirely of extremely corrosion-resistant chrome-nickel steel •Frying base made of special sandwich material (MKN PowerBlock), smooth and ground •Heating via SUPRA contact heating elements for optimal heat distribution and short heat-up times •Braising pan with raised rim, tightly welded •High heat capacity ensures even heat transfer and minimal temperature fluctuations when loading the plate with cold food •Equipped with electronic "Eco Control" control as standard •Equipped with a double-walled hinged lid and mixer tap as standard •Drainage via a front-facing safety drain tap Shipping: Hedpfx Adeu S H D Nodeng • Delivery or pickup upon request • Worldwide shipping upon request • Shipping to islands or mountain stations only upon request Do you have questions, would you like advice, or would you like to reserve something? View location? You can reach us by phone during our opening hours: Monday-Friday 9:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, TECHNICAL DETAILS Control: Sinumerik Hjdpfx Ajwtravjddong X travel: 550 mm Y travel: 300 mm Z travel: 425 mm Rapid traverse: 30 m/min Spindle mount: ISO SK 40

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 300-01, spindle speed (max.): 12,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 425 mm, number of slots in tool magazine: 108, swivel angle B-axis (max.): 101 °, No minimum price - guaranteed sale to the highest bidder! Machine with counter spindle and swiveling turntable TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 425 mm B1 swiveling axis: 101° BT axis: 0 – 180° V-axis in working area: -40 to -496 mm V-axis outside working area: up to 570 mm Z-axis (rotary axis): approx. 450 mm Spindle data Main spindle speed: 12,000 rpm Rotary spindle: 4,000 rpm C-axis: 6,500 rpm A-axis: 4,500 rpm Speed for driven tools: 4,500 rpm Tool holder Main spindle tool holder: HSKA 63 Turret tool holder: Capto 4 Tool holder diameter: 63 mm Tool magazine Tool turret: 12-position with driven tools Tool changer: 32-position Additional magazine: 64-position MACHINE DETAILS Operating voltage: 400 V Frequency: 50 – 60 Hz Rated current: 125 A Connected load: 70 kVA Dimensions and weight Installation size (L x W x H): 8,565 x 5,150 x 2,750 mm Hnsdpfowpt Akox Addog Total weight: 18,000 kg EQUIPMENT - Coolant system - Breuning Simag bar loader, year 2014 - Tool measurement system - ICS with 70 bar internal cooling - Motorized safety door - Technical documentation - Manual - Continuously variable speed - Transport possible on standard truck

Condition: ready for operation (used), Year of construction: 2011, X-axis: 300mm, Y-axis: 250mm, Z-axis: 250mm, rapid traverse (X/Y/Z): 40/40/60m/min, chip-to-chip time: 1.5s, clamping surface dimensions: 2x 550x300mm, max. spindle speed: 15,000/min, torque: 23Nm, tool holder: HSK-A32, number of tools: 12, tool changer: CHIRON basket changer, control: GE Fanuc Series oi-MC. An on-site inspection is possible. Hedpfx Asw T Su Ssddjng

Condition: used, mileage: 1,044,000 km, power: 368 kW (500.34 HP), first registration: 10/2008, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: black, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, MAGNUM DXI 500 AUTOMATIC CRUISE CONTROL 2x TANK DEFECTIVE ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST * DEFECTIVE, NOT ROADWORTHY VEHICLE FEATURES * EURO 5 Hsdswwywkspfx Addjng * AUTOMATIC TRANSMISSION * ENGINE BRAKE * CRUISE CONTROL * MULTIFUNCTION STEERING WHEEL * HANDS-FREE SYSTEM * AIR CONDITIONING * AUXILIARY HEATER * REFRIGERATOR * ELECTRIC WINDOWS * ON-BOARD COMPUTER * DIFFERENTIAL LOCK * COMFORT SEATS * SEAT HEATING * 2x FUEL TANKS * ADBLUE * GROSS VEHICLE WEIGHT: 18,000 KG * CURB WEIGHT: 7,700 KG * TIRE SIZE: * 1st AXLE: 355 / 50 R 22.5 * 2nd AXLE: 295 / 60 R 22.5 * IMMEDIATELY AVAILABLE ---- * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT CUSTOMS EXW DECLARATION IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAY, 30 DAY LICENSE PLATES AND 17-21 DAY AUSTRIAN LICENSE PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be required. Amendments, errors, and prior sale reserved! You can find more vehicles on our website: Sales take place exclusively based on our general terms and conditions – see homepage. Important Note: Despite careful checking of all details in our offer, errors may occur. Some of these can be caused by data transfer errors within the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Statement: This sales listing does not constitute an offer in the sense of §145 BGB. Rather, these details are intended as information for contract initiation. All information provided here is non-binding and does not represent guaranteed properties.

Condition: new, Year of construction: 2025, machine/vehicle number: 542058570, new Marini Magnum 160 mobile asphalt mixing plant year: NEW capacity: up to 160 t./h 1 year guarantee - calorific power of the fuel 9,600 kcal / kg, - material passing through the #8 (2,38mm) sieve is no more than 20%, - The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system. - Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support. Quadruple feed bin (two-by-two) with 3,80mm wide opening and a capacity of 6m3, completely designed to support the strains during the unloading of materials. Regulated floodgate for flow of aggregates. - Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins. - Feeding belts with 20\" wide canvas supported by 4\" rollers in \"V\" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by an electric motor. - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp. - rotational external mixer - burner with fuel spraying by gear pump Kcal/h - Dry filtering system that consists of dust collecting system - Control system Sistex complete offer and details by request * more machines, mixing plants and trucks on our website more information Hnodpfx Adjhd Nb Dsdjg Application: Construction, Material used: Asphalt,

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie Hsdpeuhbr Tjfx Addong - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2026, Powerful Magnum Stationary Concrete Mixing Plant Magnum 120 is an ideal concrete plant for all concrete producers. It is manufactured to serve for years without corrosion in nature. Complies with international quality management and shipping standards. Magnum 120 works with a fully automatic system. After the installation, local personnel are trained and the concrete plant is delivered. -Plant Capacity 120m3/s -Mixer Type Twinshaft Mixser -Compacted Concrete Mixer 3m3 -Dry bulk Mixer 4.5m3 -Mixser Motor Power 2x55kw -Aggregate Bunker 4x30m3 -Aggregate weighing Belt 1000x14000 -Mixer Feeding Conveyor 1000x32000 Hodpswfri Isfx Addsng -Aggregate Weighing 6500kg -Cement Weighing 1700kg -Water Weighing 1000lt -Additive Weighing 40kg -Cement Screw Ø273 (Optional) -Cement Silos (optional) 60-80-100 ton -Compressor 7.5kw

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, workpiece weight (max.): 3,500 kg, spindle speed (max.): 7,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis travel: 2,500 mm Y-axis travel: 1,000 mm Z-axis travel: 770 mm Distance spindle nose: 890 mm Number of machining axes: 3 Table Clamping surface left-right: 3,220 mm Clamping surface front-back: 1,000 mm Workpiece weight: max. 3,500 kg Spindle / Head Speed range: up to 7,000 rpm Drive power: 40 kW Tool Magazine Number of tool positions: 50 Workpiece Automation Storage type: magazine Control Control type: CNC Control model: Heidenhain ITNC 530 MACHINE DETAILS Electrical connection data Connection voltage: 400 V Dimensions & Weight Required space left/right: 6,500 mm Required space front/back: 5,000 mm Overall height: 3,700 mm Total weight: approx. 22,000 kg EQUIPMENT Hedpfjwztphex Addeng Chip conveyor: yes High-pressure pump The magnetic plates are not included in the scope of delivery (can be purchased optionally for €15,000). Machine will be provided partially dismantled at shop floor level.

Condition: new, Year of construction: 2025, Marini Magnum 120 mobile asphalt mixing plant year: NEW Hodpfswrflvsx Addjng capacity: up to 120 t./h 1 year guarantee

Condition: new, Year of construction: 2025, machine/vehicle number: 618621425, Marini Magnum 140 mobile asphalt mixing plant year: NEW capacity: up to 140 t./h 1 year guarantee - calorific power of the fuel 9,600 kcal / kg, - material passing through the #8 (2,38mm) sieve is no more than 20%, - The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system. - Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support. Quadruple feed bin (two-by-two) with 3,80mm wide opening and a capacity of 6m3, completely designed to support the strains during the unloading of materials. Regulated floodgate for flow of aggregates. - Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins. - Feeding belts with 20\" wide canvas supported by 4\" rollers in \"V\" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by an electric motor. Hodpfx Aehd I T Seddong - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp. - rotational external mixer - burner with fuel spraying by gear pump Kcal/h - Dry filtering system that consists of dust collecting system - Control system Sistex Other options and accessories Control system, control room, dust filter/dust collector Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,