Used Maho 400 E for sale (435)

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Laodsxy Styepfx Afwof Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Laedpfx Afjwd Szbswjf Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control Lajdpfxsv Amrye Afwef . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, Year of construction: 1992, functionality: fully functional, workpiece weight (max.): 250 kg, Universal milling machine in good condition with overhauled milling head/spindle head. Maintenance including new drive belts was recently carried out. Tool holder is SK40. For technical data, see the attached data sheet or documents. Ledpfxjy Ivqhe Afwjaf

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Travel ranges X/Y/Z: 1250 x 880 x 800 mm Spindle speed: 8,000 rpm Lajdpfxezqv A Te Afwof Tool magazine for 60 tools, SK 50 Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Chip conveyor Measuring probe

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 2,700 mm, total width: 1,950 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25,000 W, product length (max.): 3,308 mm, number of axes: 3, This 3-axis DECKEL MAHO DMP 60V was manufactured in 2003. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 425 mm. The machine is equipped with a spindle speed range of 20 to 18,000 rpm and a tool changer with 25 magazine positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMP 60V vertical machining centre we have for sale. Contact us for further details. Lodpfx Aeznc T Hofwoaf - Control Unit: Siemens 840D / SINUMERIK 840D powerline- Spindle Speed Range: 20 to 18,000 rpm- AC Main Drive Power: 35/25 kW (40/100% ED)- Tool Changer / Capacity: 25 magazine positions- Tool Holder Taper: HSK-A 63- Worktable Type: Swivel / Pallet Changer- Clamping Surface Area: 2x 660 x 400 mm- Internal Coolant Supply (IKZ): 40 bar / 23 l/min / 600 L tank- Coolant / Filtration System: Interlit Kompakt-Filteranlage (Type: SPB 3/600, Filter surface: 0.7 m², Tank capacity: 600 l, YOM: 2003) with gravity paper belt filter unit- Coolant / Chip Management: Scraper belt chip conveyor (1000 mm discharge height) with auxiliary 200 L coolant tank- Accessories: Electronic handwheel, integrated blow-off/spray gun attached to front cabinet- Machine Dimensions (Height): 2700 mm (Machine height), 2645 mm (Transport height)- Machine Dimensions (Width): 1950 mm (Without control panel), 2990 mm (With control panel / door open), 1950 mm (Transport width)- Machine Dimensions (Length): 3308 mm (Machine length), 3850 mm (Transport length with swivelled control)- Required Floor Area: 6000 x 4000 mm (Standard), 6000 x 5200 mm (With chip conveyor), 6000 x 5300 mm (With chip conveyor and coolant system)- Transport Dimensions (L x W x H): Approx. 3400 x 2000 x 2700 mm- Documentation Included: Machine Handbook

Condition: used, DECKEL MAHO DMC 60 U 5-axis universal machining centre, built 2002. Travels 600 x 700 x 600 mm with rapid traverse up to 40 m/min. The 12.000 rpm motor spindle in SK 40 DIN 69871 delivers 28 kW (40% ED) / 19 kW (100% ED) and is carried by an automatic universal swivel milling head with controlled B axis, working together with an NC rotary table to give full 5-axis capability. Siemens SINUMERIK 840D 3D path control. Rotary pallet changer with 2 pallets of 630 x 500 mm, 600 kg each, plus clamping hydraulics for hydraulically actuated fixtures on the rotary table and pallets. 60-pocket SK 40 magazine with horizontal double-gripper changer. Fitted with internal coolant supply and a 900 l coolant tank, chip conveyor, RotoClear rotating viewing window and Blum laser tool measurement in the work area. Lodpeznffrsfx Afweaf

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool interface: HSK 63 Laodpfxozqfvij Afwef MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swivel head FD function (feed forward) Pallet changer Infrared probe for workpiece measurement Additional magazine with 120 positions

Condition: ready for operation (used), Make: DECKEL MAHO Type of machine: DMU 35 M Control system: SIEMENS Sinumerik 840D Machine's weight: 1,8 t Tool holder: SK 40 Lodpfx Aozru Nhsfwoaf x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm Speed range: 20 – 6 300 min?¹ max. Table load: 100 kg Overall dimensions: 2,0 × 1,6 × 2,1 m Table dimensions: 400 x 280 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. • Heidenhain TNC530 Lodpjx D Nwkofx Afwjaf • 24 tool positions • SK-40 chuck • Spindle speed: 18,000 • measuring probe Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, operating hours: 13,028 h, spindle speed (max.): 9,000 rpm, total height: 2,140 mm, total width: 1,520 mm, overall weight: 3,000 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 13,000 W, product length (max.): 2,000 mm, number of slots in tool magazine: 16, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2003. It features a 3+2 axis setup with CNC-driven linear axes and a manual swivelling rotary table for enhanced versatility. The machine comes equipped with tools and an attached tool list holder for convenience. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T universal machining centre we have for sale. Contact us for further details. Ljdpfx Aszmhwzefweaf - Main Drive Speed Range: 20 - 9,000 rpm (infinitely variable)- Main Drive Power (100% ED): 9 kW- Main Drive Power (40% ED): 13 kW- Tool Holder: SK 40 DIN 69871- Pull Stud: DIN 69872 or ISO 7388/2 Type A- Tool Changer Magazine Capacity: 16 pockets- Max. Tool Diameter: 80 mm (130 mm with free neighboring pockets)- Max. Tool Length from Spindle Nose: 290 mm- Max. Tool Weight (Automatic Change): 6 kg- Max. Total Tool Weight in Magazine: 80 kg- Rigid Table Clamping Surface: 700 x 500 mm- Table Swivel Range (B-Axis): +95° / -10°- Table Rotary Range (C-Axis): 360°- Max. Permissible Table Load: 200 kg- Feed Rate (X, Y, Z): Infinitely variable up to 10,000 mm/min- Rapid Traverse (X, Y, Z): 12 m/min- Input Resolution (X, Y, Z): 0.001 mm- Position Tolerance (X, Y, Z): 0.010 mm- Operating Voltage: 400 V AC (+6% / -10%), 3N/PE, 50/60 Hz- Power Consumption (100% ED): 17 kVA- Nominal Current (100% ED): 28 A- Recommended Network Fuse: 35 A- Pneumatic Supply Pressure: 5.5 - 8.0 bar- Compressed Air Consumption (without Blast Air): 7 m³/h- Compressed Air Consumption (with Tool Blast Air): 20 m³/h- Max. Setup Weight (Machine + Workpiece + Tools + Coolant): approx. 3,400 kg- Included Equipment: Electronic handwheel HR 410 (Optional), central lubrication system, coolant unit, tool list holder on enclosure wall Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2006, machine/vehicle number: 2329200, functionality: fully functional, operating hours: 33,674 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 11,000 kg, table length: 700 mm, table width: 900 mm, spindle speed (max.): 16,000 rpm, table load: 800 kg, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 80 P duoBLOCK, year of manufacture: 2006, operating hours (h): 33,674, serial no.: 2329200, travel (X/Y/Z): 800/800/800 mm, max. spindle speed 16,000 rpm, HSK 63 tool holder, HEIDENHAIN Mill Plus IT control, G7 function, internal coolant supply, 60-position tool changer, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Laedpfxsrkz Rgs Afwsf

Condition: good (used), Year of construction: 1997, machine/vehicle number: 570035, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, total height: 3,300 mm, total length: 4,600 mm, total width: 5,500 mm, overall weight: 6,000 kg, table length: 700 mm, table width: 500 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle motor power: 25,000 W, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, Equipment: documentation/manual, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 70 V, year of manufacture: 1996, serial no.: 570035, travel X/Y/Z): 710/520/520 mm, HEIDENHAIN control, max. spindle speed 12,000 rpm, 60-fold tool changer, compact filter system INTERLIT SUK200/900, year of manufacture: 1997, filling volume 900 l, filter surface 0.2 m³, chip conveyor, internal coolant supply Laodorkz A Ispfx Afwef Comment: 1 tool changer defective

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 11460000643, functionality: fully functional, operating hours: 35,319 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 10,000 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 10 rpm, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 125 P duoBLOCK, year of manufacture: 2006, operating hours (h): 35,319, serial no.: 11460000643, travels (X/Y/Z): 1,250/1,000/1,000 mm, spindle speed max. 10,000 rpm, 60-fold tool changer, B-axis, 190° swivel, HEIDENHAIN Mill Plus control, internal coolant supply, tool measuring system, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Lsdpfx Ajrkz Tfefwoaf

Condition: good (used), Year of construction: 1996, machine/vehicle number: 54634, functionality: fully functional, operating hours: 51,997 h, power: 10 kW (13.60 HP), input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 3,500 kg, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, mount diameter: 40 mm, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle speed (max.): 15,000 rpm, spindle speed (min.): 10 rpm, Equipment: documentation/manual, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 50 V, year of manufacture: 1996, operating hours (h): 51,977, serial no.: 054 634, travels (X/Y/Z): 500/380/380 mm, machine on 21,341, max. spindle speed 15,000 rpm, tool holder SK40, Heidenhain control, chip conveyor, 24-fold tool changer, compact filter system INTERLIT SK200-760, year of manufacture: 21,341, max. spindle speed 15,000 rpm, tool holder SK40, Heidenhain control, chip conveyor, 24-fold tool changer, compact filter system INTERLIT SK200-760, year of manufacture: 1996, tank capacity 600 l, filter area 0.2 m² Lsdpfxjrkzyae Afweaf

Condition: good (used), Year of construction: 2003, functionality: fully functional, X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control system: TNC Heidenhain Spindle operating hours: 13,100 Total operating hours: 38,000 Spindle speed range – main spindle: 20 – 9,000 min⁻¹ Drive power – main spindle: 9 / 13 kW Table diameter: 700 x 500 mm Tilting range B: 105° (-10°/+95°) manual Rotatable 360° manual Max. table load: 200 kg Number of T-slots: 7 Centering bore: 30H7 mm Number of tool positions: 16 Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total weight: 50 kg Feed rate max.: 10,000 mm/min Lodpfxezi Efbe Afwsaf Total power consumption: 17 kW Machine weight: approx. 3.2 t Space requirement: approx. 4.0 x 4.0 x 2.5 m

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,033 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D SolutionLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. • Power capacity: 103 kVA • Current (In max): 148 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm Ljdpfx Afsy Ryyrowjaf • Distance spindle center to table: 150 mm (minimum distance, Motor spindle) / 145 mm (Gear spindle) Technical Specification Taper Size HSK 100

Condition: used, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,150 rpm, CNC Milling Machine Brand: Maho Model: 500C Control System: Philips CNC 432 Table Dimensions: 650 × 320 mm X-axis Travel: 500 mm Y-axis Travel: 400 mm Z-axis Travel: 300 mm Spindle Speed: 20 – 3150 rpm Ljdpjzlfu Ujfx Afwjaf Digital Readout

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes from a CNC machining center MAHO type MC 600 -Width: 500 mm -Length: 500 mm -Height: 180 mm Ljdpfx Aob A Hy Ujfwoaf -with supporting ribs -Groove width: 14 mm -Number: 1 table available Price: per piece -Weight: 200 kg/piece

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -comes from a MAHO CNC machining center, type: MC 600 -for: max. 48 recordings -Recording: SK40 -Dimensions: 1630/H450 mm Lasdpsb A Nu Tjfx Afwsf -Empty weight: 325 kg

Condition: good (used), CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -IDENT NO.: 27.71 231 Ledpfx Aoq T T I Isfwsaf -Dimensions: 400/280/H75 mm -Weight: 1.6 kg

Condition: used, Control panel, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, Touch Panel -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C -Type: 1435-18-22 -Total dimensions: 340/310/H30 mm -Weight: 0.8 kg Ledpfsq T T Nwsx Afwsaf

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available -Dimension: 490/110/H390 mm -Weight: 15 kg Lsdoq T T Npepfx Afwoaf

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller Lodpsq T T I Dofx Afwsaf -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: TDM 3.2-20-300-WO MOD 14/1X023-094 -Quantity: 2x servo controllers available -Dimension: 320/70/H390 mm -Weight: 7.7 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm Lsdpfjq T T Ndex Afweaf -Weight: 1.5 kg