Used Maho 700 S for sale (430)

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Iodjx Dw Iwspfx Am Djih

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Ijdpex Dw Iqefx Am Deih

Condition: ready for operation (used), Year of construction: 1989, Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible. Iedpfx Amowmqxks Dsih

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad Iedpfxeu Idbye Am Doih table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: excellent (used), Year of construction: 1996, Maho MH 700 M Tool milling machine Deckel Maho MH 700 M with Heidenhain TNC 116 control, built in 1996, in SUPER condition. Isdpfjz Indnsx Am Djih From the testing department of Castwerk Technologies. CE compliant!! Technical data: Year of construction: 1996 Universal table Speed: stepless up to 5000 RPM Feed rate: stepless in 3 axes from 0 to 3000 mm/min Travel ranges X/Y/Z: 700/450/450 mm Rapid traverse rates x/y/z: 5 / 5 / 4 m/min Table surface: 750 x 450 mm Table load: 450 kg Vertical quill stroke: 80 mm Vertical quill and horizontal quill - SK40 Hydraulic clamping system Weight approx. 3400 kg Space requirement approx.: 2.5 x 2 x 3 m Drive power: 12 KVA Accessories and equipment: Heidenhain TNC 116 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control system and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Deckel Maho MH 700 M with a Heidenhain TNC 116 control. This universal milling machine is in very good original condition. It comes from a company where it was only used to a limited extent for training purposes. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel Maho has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Deckel Maho on site under power. You can find more milling machines from renowned manufacturers on our website.

Condition: ready for operation (used), Maho tool holder for Maho MH 800 C machine with Parker CJJ-HMRES23MC cylinder, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Iijdpfez Tbf Rex Am Dsh

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Iiedpfx Amez I T Rmo Doh max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: used, Manufacturer: MAHO, Type: MH 700, Serial No. 71249, Travel range X/Y/Z 700 x 450 x 450 mm, Tool holder SK 40, Table size approx. 900 x 400 mm, Control system, Manufacturer: SIPRO, Type: SIAX 121 +++ ATTENTION: This machine is part of an online auction! +++ Iodpfx Asz Tqxgsm Djih

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 Isdpezung Ejfx Am Deih >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: ready for operation (used), Maho double gripper for MAHO MH 600 E including accessories, see photos, used, normal signs of wear, 100% functional, scope of delivery as per photos Iisdpfx Aorv Ta Rom Djh

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. For self-collection. Details see attachment and available upon request. Iijdpfx Amez Atpne Deh The following parts have been removed: Axle control module PCU Control unit for cooling system

Condition: used, Year of construction: 1990, operating hours: 70,042 h, functionality: fully functional, machine/vehicle number: 120035, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,645 mm, total length: 3,560 mm, total width: 2,840 mm, overall weight: 11,000 kg, Equipment: chip conveyor, Control system: 432, software version 700 (4th axis = rotary table) 60-position tool changer (tool length/diameter/weight = 315 mm/125 mm/10 kg) Clamping surface of the CNC rotary table: D1000 x 820 mm Table load capacity: 1000 kg Travel distance, longitudinal (X-axis): 1200 mm Travel distance, transverse (Z-axis): 600 mm Travel distance, vertical (Y-axis): 600 mm Isdpfjz Ngqqox Am Deih Spindle mount: ISO40 Spindle speed, continuously variable in 2 ranges: 20-6300 rpm Feed rates, X, Y, and Z axes: 1-4000 mm/min Rapid traverse, X and Z axes: 12 m/min Rapid traverse, Y axis: 10 m/min Feed rate, rotary table movement (B-axis): 1-1500 °/min Rapid traverse, rotary table movement: 10 rpm Spindle drive: 15 kW Total connected load: 40 kVA Weight, approx.: 11000 kg Space requirement, approx. (L x W x H): 3560 x 2840 x 2645 mm Technical data subject to change without notice. Errors and prior sale excepted.

Condition: used, Year of construction: 2008, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, C-axis rotation range: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, power-on hours: 56612h, spindle operating hours: 21206h. The machine is located in the United Kingdom. Inspection possible by appointment. Iijdpfx Amoz R Uw Aj Djh

Condition: ready for operation (used), Maho milling head from Maho 800 C, used, normal signs of use, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and transport! Iiedex Et Hnspfx Am Deh

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iedjtvct Hopfx Am Deih

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping Iedpfowd Szbex Am Deih - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: excellent (used), functionality: fully functional, Measuring machine based on Zoller V520, including a fixture for pre-setting and measuring the grippers of the DMP60VLinear tool changer. It features 2 linear axes and 2 rotary axes and is supplied complete with a PC and Zoller Multivision II. The digital display for the two rotary axes is not included in the scope of supply and can be purchased separately. Iedpfx Aezvdbbom Deih

Condition: not inspected (used), CNC universal milling machine, manufacturer: MAHO, type: MH700 C, serial number: 76730, year of manufacture: 1984, screen control, manufacturer: Maho, type: CNC 432, tool holder: SK 40, table size: 800 x 520 mm, coolant system, lamp. Iijdpfxsz R Na Es Am Deh

Condition: used, Year of construction: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm total power requirement 25 kW weight of the machine ca. 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. Iisdpfxst Hwqws Am Doh * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. It was partially reconditioned in 2007 by MMD Company: geometrically measured, and mechanic and electrics were tested - a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter Iijdpfx Amoxv Av Ro Dsh 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: ready for operation (used), Deckel Maho 5100027000 touch panel for Deckel Maho CNC 432 control unit, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ijdpfxji D Upgj Am Deih

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,000 kg, The machine is running without any problems and will now be idle for a period of time as it is no longer needed. Iedpfx Amezquftj Deih Travel ranges: X: approx. 485–500 mm Y: approx. 385–400 mm Z: approx. 380–400 mm Spindle: SK 40 DECKEL Dialog 2 / Contour 2 control system Table: universal, swiveling and rotating

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC sinker EDM machine MAHO HANSEN, Type: HS 500 E, Year of manufacture: 1991, with electrode changer (without electrode holders) and accessories. Control system: EROCOM 20 (Heidenhain). Technical data: see data sheets. From a toolmaking department; all documentation available, in good condition. Iisdpfszcmanjx Am Djh

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens Ijdpsym Dz Rofx Am Dsih turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: ready for operation (used), Maho 4022 224 7043 control board with 1351-010-02 touch panel, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Ijdpfxsi Ebzps Am Doih