Used Maho 700 S for sale (427)

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1 CNC Universal Machining Center DECKEL MAHO - DMU 50 T Year of manufacture: 2003 X-axis travel: 500 mm Hodpox Auvvsfx Ah Ueg Y-axis travel: 400 mm Z-axis travel: 400 mm Control: Siemens 810 D Spindle speed range: 20 - 9,000 rpm Main spindle drive power: 9 / 13 kW Tool holder: ISO 40 DIN 69871 Table dimensions: 700 x 500 mm Swiveling B: 105° (-10°/+95°) manual Rotating: 360° manual Max. table load: 200 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14H7 mm Centering bore: 30H7 mm Number of tool stations: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total tool weight: 50 kg Feed rate max.: 10,000 mm/min Rapid traverse: 12 m/min Minimum input unit: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manually by handwheel) Available immediately. Including tool holders and zero point clamping system.

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Hsdpfstvfpcsx Ah Ujg Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee.

Condition: good (used), Year of construction: 2007, Cover Maho DMG DMU 70eVolution 5Axis simultaneous Machining center CNC Hedpevcnd Refx Ah Uog Manufacturer: DMG Deckel Maho Type [ type]: DMU 70eVolution Control unit: Heidenhain iTNC 530 Incl. handwheel/handwheel Year of construction: 12/2006 - erneuert/renewed Spindle - IKZ integrated cooling system for water 40bar and air (both possible-both possible) Travel X/Y/Z 750/600/520 mm B-axis 0 to 180° degrees C-axis n x +-360° degrees Table load up to 350 kg Spindle speed range 20 to 18,000 1/min. Tool holder SK 40 DIN 69871 Weight [weight]: 10,000kg Complete documentation is available. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Condition: good - ready for demonstration Delivery: ex warehouse - as inspected Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted.

Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° max. table load 200 kg T-slots 14 H7 Hjdovanqxepfx Ah Uog T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min feed speeds 10.000 mm/min Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours - WITHOUT tools

Condition: good (used), Year of construction: 2007, Equipment: chip conveyor, Technical Data DECKEL MAHO Seebach GmbH 4 Technical Data 4.1 Main Drive 18,000 rpm AC servomotor motor spindle Hedpox N H T Njfx Ah Uog Torque available at the spindle, considering efficiency – see diagram Motor power at 100% duty cycle – see diagram Motor power at 40% duty cycle – see diagram Spindle speed infinitely programmable: 20 to 18,000 rpm Setup mode speed: 20 to 800 rpm Performance diagram 02.273697 18,000 rpm star-delta connection Torque Nm Power kW 4.3 Feed Drive AC servomotors for X, Y, Z axes Feed rate X/Y/Z infinitely programmable up to 20,000 mm/min Input increment X/Y/Z: 0.01 mm Rapid traverse X/Y/Z: 50 m/min Setup mode X/Y/Z: 20 to 2,000 mm/min 4.5 Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance X/Y/Z with direct measuring system: 0.010 mm 4.6 Working Area Travel X axis: 750 mm Travel Y axis: 600 mm Travel Z axis: 520 mm 4.7 Main Drive Working spindle: SK HSK Tool holder: steep taper SK 40 DIN 69871 A Tool clamping: hydraulic/mechanical 4.8 Tool Changer with Magazine SK Working spindle: 18,000 rpm Magazine positions: 92 Tool length from spindle nose: 315 mm Max tool weight (automatic change): 6 kg Max total tool weight in magazine: 270 kg Retention studs 4.9 Work Table NC rotary table with swivel axis Clamping surface rotary axis: 500 x 500 mm Centering bore: 50 H6 Max table plate speed: 21.5 rpm Max torque rotary axis: 1,674 Nm Max swivel torque: 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 180 degrees Input/display increment: 0.001 degrees Weight abt. 310 kg Max. table load (centered): 250 kg Max. workpiece diameter: 628 mm Max. workpiece height: 500 mm 4.10 Pallet Changer 2 pallets with pitch hole grid Rotary movement: 180 degrees Longitudinal travel: 350 mm Lift: 75 mm Permissible load (one sided): 250 kg Permissible load (both sides): 500 kg 4.11 Installation Data Electrical supply according to EN 60204-1 Machine connection: TN S system L1 L2 L3 N PE Main connection: 3N PE, 50/60 Hz, 400/230 V Rated current at 100% duty cycle: 82 A Power consumption at 100% duty cycle: 57 kVA Max. pre-fuse: 100 A Pre-transformer Free cable length above floor: 0.8 m Connection cable as per DIN 5710 VDE 0100 Pneumatic Supply Compressed air, condensate-free and dust-free Recommended filter fineness: 50 μm Air volume without blow air: 50 m³/h Additional blow air for tool cooling: 25 m³/h Air pressure: min. 5.5 bar, max. 8 bar Pressure connection (machine side): Bosch 1823 351 01

Condition: ready for operation (used), Year of construction: 1998, A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment. Hedsx Ivi Dspfx Ah Ueg

Condition: good (used), Deckel Maho 4-Axis CNC Milling Machine DMC 64 V linear Working area: - X-axis: 640 mm - Y-axis: 600 mm - Z-axis: 500 mm - Equipped with Heidenhain 520 control - Equipped with coolant system and paper filter - Probing system prepared, but probe is missing - Low operating hours - Machine from original owner - Used for single-part production of precision components - All 4 axes are operational; however, the encoder for the main spindle is defective Hsdpfx Ahoxivy No Ueg Good condition, fully functional. Can be viewed and tested under power on site. Shipping also available internationally. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number provided above or below at any time. Subject to prior sale and possible errors in the description. VAT will be shown separately on my invoices. Shipping by freight forwarding.

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, coolant supply: 70 bar, number of spindles: 1, number of slots in tool magazine: 180, Horizontal machining center DECKEL MAHO DMC 60 H Linear with double pallet changer and 180 tool magazine positions Year of manufacture: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0–18,000 rpm Drive power: 35 kW Torque: Spindle taper: HSK 63 Hsdjx Dlgnopfx Ah Uog Number of magazine positions: 180 pcs Number of pallets: 2 Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm C-axis: 0.001° All axes with linear drives Equipment: -Coolant system -Chip conveyor The machine has been regularly maintained and is still very precise! More pictures will follow. Video available on request.

Condition: used, Year of construction: 2003, Manufacturer: DMG DECKEL MAHO, Model: DMU 125 P retrofit, Year of manufacture: 2003, Serial no.: 11180004143, Control: DMG, Travel X/Y/Z: 1,250 x 880 x 800 mm, Rotary/tilting CNC table 360 x 0.001°, Main spindle drive: 10 kW, Speed range: 20 - 12,000 rpm, Tool changer with 30 stations, Tool holder: HSK 63, Operating hours Run: 13,710 h / Load: 57,369 h, Chip conveyor: Blechtechnik, Skip with forklift receptacle, Belt filter unit: DMG, Accessories: various tool holders. Hsdpfx Ahjx A U The Usg This machine is part of an online auction.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, General Data Measurements width 4000 mm Hodpfxjx I S Shj Ah Usg Measurements depth 6000 mm Measurements height 2500 mm Machine weight 10600 kg Control Unit Brand Siemens Model Sinumerik 840D Main Drive Number of axis 4 Movement X-Axis Movement 560 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Media Internal cooling Yes Additional Equipment 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree Workpiece probe Internal cooling Large coolant tank with automatically coated filter paper This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2007, Manufacturer DMG Model DMC 835 Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel Hsdpjx N H I Tjfx Ah Ujg 510 mm Spindle speed 10,000 rpm Feed rate Programmable up to 15 m/min – rapid traverse 30 m/min Positioning tolerance 0.008 mm Tool magazine 30 positions High-pressure coolant (IKZ) and chip conveyor Weight approx. 6.5 t

Condition: used, x-travel 500 mm y-travel 380 mm z-travel 350 mm speeds 20 - 5000 U/min table surface area 800 x 355 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 6,0 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm From a training center (“Daimler Chrysler AG”) Completely overhauled in 2006 for approx. 33,000 euros Includes new HEIDENHAIN “124” control Hodpfevuz Ruox Ah Ujg Very little use since overhaul (!!) Operating hours – “machine ON” only: 10,407 hours Features: - Electric CNC universal tool milling machine - HEIDENHAIN TNC 124 linear control (installed in 2007) * Swiveling control panel, front right of the machine - Electro-hydraulic tool changer - Vertical milling head - ISO 40 with vertical work spindle * Manual spindle feed .. 50.0 mm * Scale ring for reading the quill adjustment - Horizontal work spindle incl. counterholder - Rapid traverse feed X-axis .. 0 - 4000 mm/min - Rapid traverse feed Y-axis .. 0 - 2000 mm/min - Rapid traverse feed Z-axis .. 0 - 4000 mm/min - Central lubrication, electric - Pneumatic minimum spray device (lubrication system) - Coolant device - Machine stand with base - Machine light - Original operating instructions + circuit diagram + acceptance report, etc.

Condition: good (used), MAHO Milling machine MH400 - holder SK40 - with digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Hodoum Rnpspfx Ah Ueg Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Hjdpfsxylqxsx Ah Usg Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Hodpexf Ur Nefx Ah Usg

Condition: good (used), Working travels 500x350x380mm Table size 790x360mm Spindle taper ISO40 Spindle speeds 63-4000 rpm Active digital read-out Hedpeff R Slofx Ah Usg Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Deckel Maho DMU 50 EVO Linear with ITNC 530 About the machine: Fast and flexible 5-axis simultaneous milling machine, in excellent condition. Fully equipped! Suitable for connection to automation systems! Technical specifications: Hsdpfx Ahjx Hwhrs Ujg - Control unit: Heidenhain ITNC 530 - Travel (X, Y, Z axes): 500/450/400 mm - Travel (B, C axes): 161.955/360° - Clamping surface, rotary table: 500 x 380 mm - Rapid traverse: X - 80 m/min, Y - 50 m/min, Z - 50 m/min, B - 40 rpm, C - 50 rpm - Spindle speed: 20–18,000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Network connectivity - Prepared for automation integration Accessories: - Internal coolant system with belt filter - Work area rinsing system - Heidenhain TS 649 probe - Coolant/air blast selection via M-code - Oil mist extraction unit - Rinsing pistol - Chip conveyor - Hand-held control unit Machine dimensions (L x W x H): 3800 x 3200 x 2800 mm Weight: approx. 6,500 kg Inspection and test run under power at our facility is, of course, possible. We are also pleased to offer transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We are there for you! From machine purchase, transport, and installation, through to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: new, functionality: fully functional, A new control system for your machine – modern servos – new controller – up to 6 axes The Retrofit Kit V2.0 enables the existing scale of Maho 600 Series industrial machines to continue being used. Previously, digital operation required feedback from the motor to the servo amplifier. With the analog system, position feedback is routed to the CSMIO. This means that the motor encoder is now only required for the servo drives, no longer for the CNC controller. As a result, pitch errors can be eliminated thanks to the direct measurement approach. The kit for the Deckel Maho 600 Series includes: - 1 x Delta B3 Controller with 1500-watt output - 1 x Delta B3 Motor 1500 watts with brake - 2 x Delta B3 Controllers with 1000-watt output each - 2 x Delta B3 Motors 1000 watts - 2 x 5-meter encoder cables - 2 x 5-meter motor cables without brake - 1 x 3-meter encoder cable Hsdpfx Ahjxz Dkgs Ujg - 1 x 3-meter motor cable with brake - 2 x B3 plug-in boards without brake incl. 3 patch cables per board - 1 x B3 plug-in board with brake incl. 3 patch cables per board - 1 x BIG IO interface module - 1 x Maho Deckel & Co connection board - 2 x encoder boards - 1 x Digital Input 12-23 board - 1 x patch cable set - 1 x CSMIO IP-A controller - 1 x milling SIM software with customized interface - 1 x 24 V 10A power supply - 1 x power distribution unit with LED display - 1 x C2000 4.0 kW frequency inverter We are also happy to provide you with a quote for Deckel, Mikro, etc.

Condition: good (used), MAHO C axis machine table - Table diameter: 600 mm Good condition fully functional can be inspected and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent. Hedpoic Rvqofx Ah Ueg

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R Hjdpfoxv Av Rjx Ah Uog

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min Hodpfjxv D Uzsx Ah Ueg feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: used, Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, table width: 1,250 mm, table length: 800 mm, Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530 Manufacturer DECKEL MAHO Model DMC 100 V Hi-Dyn Year 2002 Condition Used Stock Number CL092 Working table size 1250x800 mm Longitudinal travel x axis 1000 mm Cross travel y axis 800 mm Vertical travel z axis 500 mm Hedpfxsx I N Rzj Ah Uog Measurement system HEIDENHAIN optical scales Working feed x-y-z axes 0 - 35.000 mm/1' Rapid feed x-y-z axes 50.000 mm/1' Spindle taper type 40-Din 69871 Automatic tools change nr. 30 Spindle speed 0- 18.000 rpm Spindle motor power 15 Kw Cnc HEIDENHAIN i530 Approx net weight 00.000 Kg Accessories Chip conveyor

Condition: good (used), functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 600 mm, For sale: the MAHO MH 1000 milling machine shown in the photos, manufactured by the German company MAHO. The machine is operational, connected, and ready for work. Its condition is assessed as very good. The machine can be connected and test-run on site. Loading the machine is included in the price. TECHNICAL DATA: - Rapid feeds on all axes - Mechanically clamped tool Hsdpfx Ajvmhtyeh Ueg - X axis travel: 1000 mm - Y axis travel: 750 mm - Z axis travel: 600 mm - Spindle taper: ISO 40 - Quill with automatic feed - Swivel head - Table dimensions: 740 x 1250 mm, triple-swivel - The table has an additional manual travel on the Y axis of ±200 mm - Table swivels 360 degrees - Table swivels longitudinally and transversely ±30 degrees - Speeds from 32 to 1600 RPM - Machine dimensions: 3500x2500x2500 mm - Weight: approx. 5500 kg

Condition: good (used), Year of construction: 2002, DECKEL MAHO Milling Machine DMC 63 V Good condition, fully operational, can be inspected and tested under power on site. Shipping available internationally. Inspection: In principle, I would like to point out that to avoid misunderstandings, the item can be inspected and tested under power before purchase. Please ask any questions prior to purchasing to avoid ambiguities. For general inquiries or to arrange an inspection appointment, I can be reached at the phone number listed above or below at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Hsdpexuwm Iofx Ah Uog Shipping via freight carrier.

Condition: good (used), DECKEL MAHO 5-Axis Milling Machine DMU 50 eVolution - With probe - With handwheel - With several tools Good condition, fully functional, can be viewed and tested on site. Shipping also available abroad. Inspection: Please note that, to avoid misunderstandings, the item can gladly be inspected and tested under power before purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number provided below or above at any time. Subject to prior sale and errors in description. Hsdpex Emxkefx Ah Usg VAT is shown separately on my invoices. Shipment via forwarding agent.