Used Maho 700 for sale (444)

Condition: ready for operation (used), Maho 4022 226 3420 circuit board, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Lhodpji Ebztefx Aggsl

Condition: used, Year of construction: 1996, X-axis: 500mm, Y-axis: 380mm, Z-axis: 380mm, B-axis: 180°, C-axis: 360°, max. spindle speed: 15,000rpm, feed and rapid traverse: 30m/min, tool changer: 24-position, tool holder: SK40, control: Deckel Maho MillPlus, spindle operating hours: 7,000h, the original screen is defective, therefore a separate monitor is used, replacement spindle has 7,000h, spindle module and E/R module replaced in 2023, C-axis table bearing repaired in 2023, Z-axis guideways repaired in 2024, hard drive replaced in 2024, without clamping systems or tools, an on-site inspection is possible. Lodpfxoz Ea Rnj Aggohl

Condition: used, Year of construction: 2000, operating hours: 3,273 h, machine/vehicle number: 15015702974, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, torque: 130 Nm, controller manufacturer: Heidenhain 426/430, workpiece weight (max.): 350 kg, total height: 2,724 mm, total length: 2,756 mm, total width: 2,020 mm, table width: 500 mm, table length: 700 mm, rotary table diameter: 700 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-Axis Machining Center DECKEL MAHO DMU 70V Lhsdpfx Aszumh Ioggsl We offer for sale an advanced, universal vertical machining center, the Deckel Maho DMU 70V (part of the renowned DMG MORI group), equipped with a numerically controlled (NC) rotary/tilting table. The machine features a compact and robust design, minimizing its footprint in the production hall while offering full capabilities for advanced 5-axis machining. AXIS SPECIFICATIONS AND WORKING AREA • Axis travel (XYZ): X = 710 mm | Y = 520 mm | Z = 520 mm • Working travel: 710 mm (X) / 520 mm (Y) / 520 mm (Z) INNOVATIVE NC ROTARY/TILTING TABLE (4th and 5th AXIS) • Mounting surface dimensions: ∅ 700 mm x 500 mm (practical design with factory-cut sides, facilitating optimal mounting of vises and fixtures) • Maximum table load: 350 kg (full mechanical safety of the gearbox, bearings, and measuring system) • Axis rotation range: • C-axis (rotation): continuous / multi-rotation operation (advanced trochoidal milling strategies) • B-axis (tilting): wide working range of over 180°, providing excellent access to the workpiece and freedom for angled undercutting MAIN DRIVE AND SPINDLE • Spindle speed: continuously (steplessly) adjustable in the range of 20 – 12,000 rpm • Spindle power: 15 kW • Maximum torque: up to 130 Nm (powerful cutting force guaranteeing excellent stiffness and stability during heavy rough machining of hard materials) CONTROL SYSTEM AND TOOL MAGAZINE • Control system: Reliable and widely appreciated by operators, the Heidenhain 426/430 (simple dialog programming, intuitive menu) • Tool magazine: Automatic, compact chain-type magazine with a capacity of 32 positions (fast tool change in automatic cycles) LOGISTICAL AND CONNECTION PARAMETERS • Overall dimensions of the machine ready for operation (with chip conveyor): • Length: 2756 mm • Width: 2020 mm • Transport height: 2724 mm (the machine fits easily on standard trailers and passes through conventional hall doors) • Total machine weight: approx. 5,500 kg • Maximum power consumption (connection): up to 42 kVA • Input voltage: 400 V (AC - three-phase current) • Current protection (fuse): 63 A • Power supply frequency: 50/60 Hz MACHINE CONDITION AND ADDITIONAL INFORMATION The machine is in good technical condition, regularly serviced and maintained. It is ideally suited for both serial production and tool shops producing complex molds, dies, and precise 5-axis parts. The machine comes complete with a chip conveyor.

Condition: good (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 18,000 rpm, The complete photo gallery is available only upon exclusive request from end-user customers. DMG / DECKEL MAHO DMF 360 linear Year of manufacture: 2013 Ljdezznnvepfx Aggshl Working area X: 3,600 mm Y: 1,100 mm Z: 900 mm Moving table design 2 working spaces for pendulum machining removable working space partition direct measuring systems Dynamics / Axes Linear drive X-axis Rapid traverse X/Y/Z: 80 / 60 / 60 m/min Acceleration X/Y/Z: 5 / 6 / 6 m/s² Active cooling for main spindle and linear motor Swivel head / Main spindle CNC swivel head B-axis Speed range: 20–18,000 rpm Tool holder: HSK-A63 According to DIN 69893 Power: 35 / 25 kW at 40 / 100 % duty cycle Tool magazine 60 tool positions Magazine version compatible with HSK-A63 / SK40 Chain magazine Double gripper Chip-to-chip time: 7.5 s Control system HEIDENHAIN iTNC 530 3D control smarT.NC ERGOline Control 19" screen Table / Rotary table Fixed table: 4,200 × 1,100 mm Integrated rotary table Rotary table Ø 1,050 mm Arranged on the left Max. load capacity: 1,200 kg Hydraulic clamping Hydraulic clamping 30–240 bar 2 circuits Coolant / Production Internal coolant through the spindle 40 bar Coolant system 980 liters Chip conveyor Spray gun Rotary through-spindle Purge air for linear measuring systems Blow-through air through the spindle center Blow-through air selectable via M-function Maintained compressed air with low oil content Measuring technology Infrared measuring probe HEIDENHAIN TS 649 DMG Laser tool breakage detection Further standard equipment Automatic working space doors 2 rotating viewing windows 4-color signal light Electronic handwheel Operating mode 4 / Process monitoring Safety package in case of power failure Overvoltage protection Undervoltage monitoring Fast brake control Torque support HSK-A63 / SK40 / CAT40 Tool package for aluminum machining DMG Messenger Web DMG Netservice Client

Condition: good (used), Year of construction: 2001, DMG / MAHO DMC 80 U – CNC Universal Machining Center Manufacturer: MAHO / DMG Model: DMC 80 U Machine Type: CNC Universal Machining Center Year of Construction: 2001 Machine/Factory Number: 71.408.395 Control System: MillPlus IT Operating Hours: approx. 90,896 h Lhsdsz D Stfepfx Aggjl Spindle Operating Time: approx. 44,717 h Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Draw-in Force Target: 22 kN Measured Tool Draw-in Force: 17 kN Spindle/Geometric Runout at L = 0 mm: 0.005 mm Spindle/Geometric Runout at L = 200 mm: 0.005 mm Tool Management Tool Magazine: 120 tool positions Automatic Tool Changer Tool gripper disassembled and cleaned as part of the last documented maintenance Pallet Automation 6 pallet positions Automated pallet handling system available Rotary/NC table available B and C axes available, according to the electrical maintenance report Axes / Drives Documented in the maintenance report of 2026 NC rotary table and axes Pallet changer / pallet handling Tool magazine / tool changing system Coolant and filter system Coolant system Chip conveyor Interlit compact filter Spindle oil cooler Smoke/mist extraction Ringler extractor During the documented maintenance, the following were carried out, among others: Coolant tank steamed and cleaned Chip conveyor cleaned Extraction system cleaned Tool gripper disassembled and cleaned Pressure accumulator checked and refilled with nitrogen to 80 bar Extractor cleaned Machine geometry checked Hydraulics / Lubrication Spindle cooling unit Hydraulic unit NC rotary table Oil changed during maintenance Central lubrication Performed by DECKEL MAHO Pfronten. The following were checked or serviced, among others: Electrical cables Control cabinet Hydraulic lines and hoses Compressed air system Check valves Axes Lighting Filters Machine function Emergency stop system Door locks Two-hand operation Machine geometry Electrical safety Check valves were renewed according to the maintenance report Electrical check very good according to DIN EN 60204 Insulation measurements – excerpt All documented measurement points were evaluated as OK. Main spindle motor: 192 MΩ X-axis: 255 MΩ Y-axis: 103 MΩ Z-axis: 427 MΩ B-axis: 279 MΩ C-axis: 108 MΩ Tool magazine: 267 MΩ Pallet changer drive: 113 MΩ Pallet changer linear drive: 90 MΩ Vertical stroke pallet changer: 1.12 GΩ Smoke extraction: 97 MΩ Chip conveyor: 1.42 GΩ Tool gripper: 1.66 GΩ Hydraulics: 2.21 GΩ Machine lamp: 447 MΩ Lubrication: 3.26 GΩ Protective conductor test Specification: < 0.3 Ω Measured values: Protective door machine: 0.16 Ω Protective door pallet changer: 0.26 Ω Control panel tool changer: 0.13 Ω Coolant system: 0.11 Ω Spindle cooler: 0.21 Ω Control panel work area: 0.03 Ω Spindle: 0.22 Ω Ringler extractor: 0.21 Ω All documented measurement points are within the specified target range. Equipment CNC control system MillPlus IT Universal machining B-axis C-axis / NC rotary table 12,000 rpm spindle 120-position tool magazine 6-position pallet system Automatic tool changer Automatic pallet handling Coolant system Interlit compact filter system Chip conveyor Spindle oil cooler Smoke/mist extraction Ringler extractor Hydraulic unit Central lubrication Comprehensive safety equipment Geometry test, runout value of 0.005 mm at a measuring length of 200 mm Tool draw-in force 17 kN, target value 22 kN

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. • Heidenhain TNC530 • 24 tool positions • SK-40 chuck • Spindle speed: 18,000 • measuring probe Lhedjx D Nwkjpfx Aggjl Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: ready for operation (used), Maho electronic handwheel with spiral cable, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lsdpfji Ebz Eox Aggohl

Condition: used, Year of construction: 2006, x-travel 750 mm y-travel 600 mm z-travel 560 mm Control SIN840D pl Lodpjvxwxiefx Aggjhl table-size 950 x 650 mm workpiece weight max. 1.000 kg feed X/Y/Z/-axis 1 - 90.000 mm/min rapid traverse X/Y/Z 90,00 m/min spindle turning speed - stepless 1 - 18.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 35,00 KW tool taper HSK-A63 tool magazin: 30 tool diameter 80 mm tool diameter with 2 vacant positions 140 mm tool length - max. 300 mm weight of tools max. 10,00 kg total power requirement 58,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 7,00 x 4,00 x H3,50 m Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA pallet system MTS500, tool breakage control, coolant-unit, coolant through the spindle (23 l/min at 40 bar), chip conveyor, electronic handwheel

Condition: ready for operation (used), Maho electronic handwheel, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lhedpfx Aji Ebzwjggel

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Hours: 11,275 program hours x-axis travel: 500 mm y-axis travel: 450 mm z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Lodpfx Agsza T A Dsgjhl Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,215 h, functionality: fully functional, machine/vehicle number: 11170003783, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: Heidenhain iTNC 530, workpiece weight (max.): 800 kg, spindle speed (max.): 16,000 rpm, coolant supply: 20 bar, spindle nose: HSK-63, number of spindles: 1, number of slots in tool magazine: 60, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Rotary table diameter: 900 x 630 mm Coolant flushing system Electronic handwheel Coolant gun QuickSet cycle 3D measuring probe, Heidenhain Operating mode 4 Ledpfxozabqcj Aggehl Air cooling via spindle Internal coolant supply via spindle Operating hours: 63,490 hours Programming hours: 28,215 hours Without clamping devices Without tools The machine is fully functional and still in operation. An inspection under power can be arranged upon request.

Condition: ready for operation (used), Deckel Maho 5100027000 touch panel for Deckel Maho CNC 432 control unit, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lodpfxsi D Upge Aggehl

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Ljdpsygctrsfx Aggjhl Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2010, Machining center Deckel Maho DMU200P - Available Immediately - Worldwide Export - very good condition Control: Heidenhain iTNC430 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 18,000 rpm Spindle mount: SK40 tool magazine: 60 seats Lhsdpfx Aozz Aizjggsl chip conveyor: . probe: Hexagon electric handwheel: Heidenhain operating mode: 4 Tool measurement: Blum Laser Internal coolant supply (IKZ) and chip removal package: 40 bar High-speed spindle attachment: 42.000 U/min automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Tools: 60 x SK50

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Ledpfxsv Td Ele Aggshl Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1979, functionality: fully functional, Infinitely variable feed motor and rapid traverse motor from milling machine MH 800P Lodpfx Agoyyap Sogjhl

Condition: used, Year of construction: 2007, x-travel 730 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x 63 mm table diameter 600 mm rotatable C: 360 ° max. table load 500 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 40 kVA Ledpswpw E Nefx Aggshl weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - NC-Rotary-Table - Swivel-MillingHead

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, For sale is a Deckel Maho machining center, type DMU 50 M with path control and manual rotation axes The machine is in very good condition, fully functional and ready for immediate use. Particularly noteworthy is the possibility of working in an open cabin Technical data: Year of construction: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed speed: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360 ° (mechanical) Swivel range: +90/ - 15 ° (mechanical) Max. load: 200 kg Space requirement: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1520 x 2,200 mm Weight: 2,600 kg Lhedpfxju Unh Io Aggel Additional tool holders available on request Transport and loading can be organized on request, at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Lodswm Rrwspfx Aggohl Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: good (used), Year of construction: 1997, machine/vehicle number: 570035, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, total height: 3,300 mm, total length: 4,600 mm, total width: 5,500 mm, overall weight: 6,000 kg, table length: 700 mm, table width: 500 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle motor power: 25,000 W, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, Equipment: documentation/manual, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 70 V, year of manufacture: 1996, serial no.: 570035, travel X/Y/Z): 710/520/520 mm, HEIDENHAIN control, max. spindle speed 12,000 rpm, 60-fold tool changer, compact filter system INTERLIT SUK200/900, year of manufacture: 1997, filling volume 900 l, filter surface 0.2 m³, chip conveyor, internal coolant supply Comment: 1 tool changer defective Lodpfx Agsrkz A Ijgohl

Condition: good (used), functionality: fully functional, CNC milling machine Deckel Maho DMU 80 T Control system: Heidenhain TNC426 Lodpezhpzqsfx Aggjhl Spindle speed: 20-6300 rpm Feed rate x, y, z: 20-10000 mm/min Rapid traverse rate x, y, z: 15000 mm/min Work area: x 800 mm, y 650 mm, z 550 mm Tool holder: SK40 DIN 2079 Clamping bolt DIN 69 872 Tool changer: 25 positions Max. tool diameter 160 mm Max. overhang length from the spindle nose 315 mm Work table: Dimensions 1100 x 600 mm T-slots 9 x M14 Permissible weight 500 kg Transport data: Weight 5800 kg Dimensions (length x width x height) 3.05 x 2.40 x 2.45 m

Condition: repair required (used), Year of construction: 2011, functionality: not functional, Maho DMC 635 Eco, Year of manufacture: 2011, Control system: Siemens 840 D, Travel range X/Y/Z: 635/510/460 mm, Tool changer: 20-position, Ledpfx Aozh Uwkjggshl SK 40, Spindle speed: up to 8,000 rpm, Table size: 790 x 560 mm, Chip conveyor, Machine weight: approx. 3800 kg, Ball screw on the X-axis needs to be replaced, Lamellar cover on the X-axis is defective.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Lsdpfx Agjzw Tw Usgehl Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Ledpfx Aezx Ur Njggshl

Condition: used, Year of construction: 1994, Technical details: Lsdpfx Ajyk Urueggohl x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm tool taper: SK40 spindle speed max.: 12.000 U/min Tool changer: 30 fach electronic handwheel chip conveyor *