Used Maho Mh 800 P for sale (437)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 14,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 60 m/min • Y: 40 m/min • Z: 40 m/min • Feed Force (X, Y, Z-Axis - 40% ED): 7000 N • Feed Speed (X, Y, Z-Axis): max. 40 m/min • Rapid Traverse (Y, Z-Axis): 40 m/min • Rapid Traverse (X-Axis): 60 m/min • Ball Screw Diameter/Pitch (X, Y-Axis): 40 x 15 mm • Position Accuracy (Y, Z-Axis Standard - Indirect Measurement System): 0.020 mm • Position Accuracy (X-Axis Standard - Direct Measurement System): 0.005 mm • Position Accuracy (Y, Z-Axis Option - Direct Measurement System): 0.008 mm • Resolution: 0.001 mm • Input Resolution (X, Y, Z-Axis): 0.001 mm • Main Drive Power (40% / 100% ED): 18 / 14 kW • Main Drive Torque (40% / 100% ED): 95 / 75 Nm • Front and Rear Spindle Bearing Diameter: No specification • Spindle Speed: Infinitely programmable from 0 to 12,000 min⁻¹ • Setup Operation Spindle Speed: 0 to 800 min⁻¹ • Program Check with Manual Intervention Spindle Speed: 0 to 5,000 min⁻¹ • Motor Type: Direct drive via speed-controlled asynchronous motor with liquid cooling • Maximum Torque (S1 - 100% ED): 70 Nm • Maximum Torque (S6 - 40% ED): 100 Nm • Maximum Motor Power (S1 - 100% ED): 13 kW • Maximum Motor Power (S6 - 40% ED): 19 kW Prsdeyz Tkfopfx Alcea • Included Equipment: Chip Conveyor (Spiral type) • Chip Conveyor Discharge Height: 380 mm • On this machine, compressed air can be activated through the spindle using an M-code command

Condition: good (used), Working travels 500x350x380mm Table size 790x360mm Spindle taper ISO40 Pjdpfsff R Slox Alcora Spindle speeds 63-4000 rpm Active digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2008, operating hours: 9,521 h, Deckel Maho DMC 835V CNC Machining Center Year of manufacture: 2008 Control unit: Siemens 840D with Shopmill Travel (X/Y/Z): 835mm/510mm/510mm Spindle speed: 10,000 rpm Spindle power: 14kW Table dimensions (X/Y): 1000mm/560mm Table load capacity: max. 800kg Workpiece height: 720mm Tool stations: 20 Tool holder: SK40 Weight: approx. 4,500kg Operating hours: 9,521h Chip conveyor Predpfxoxxpcvo Alcja

Condition: excellent (used), Year of construction: 2002, 5-axis CNC machining center 2002 Control system: Heidenhain iTNC 530 Podpfjwn A Slsx Alcsra Technical data: x-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Max. torque: 130 Nm Tool holder: SK 40 (ISO 7388IIB) Swiveling: B: 103° Work table: Table clamping surface: 1,250 x 700 mm Rotary table diameter: 700 mm Rotating: C: 360° Max. table load: approx. 500 kg T-slots: 11 x 14 mm x 63 mm Tool magazine: Number of tool positions: 32 (2 x 16) Tool holder: SK 40 (ISO 7388IIB) Max. tool diameter: 80 / 130 mm Max. tool diameter with free adjacent compartment: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg

Condition: good (used), Year of construction: 2000, CNC 5-Axis Universal Machining Center Deckel Maho DMC 80U hi-dyn Year of manufacture: 2000 Control: Heidenhain TNC 430 Travel range: X = 800 mm Y = 700 mm Z = 600 mm Speed range: 0 - 12,000 rpm Tool holder: ISO 40 Tool changer: 60-station tool magazine Table: 800 x 635 mm Drive: 10.0 kW milling spindle Psdpfxev Rvqbs Alcjra Pallet changer Internal coolant system with high-pressure pump and compact filter system Chip conveyor Spindle cooling Blohm tool dimensioning

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, Equipment: chip conveyor, DECKEL MAHO DMC 1035 V – Vertical Machining Center – Year of Manufacture 2007 For sale is a DECKEL MAHO DMC 1035 V CNC machining center in well-maintained condition. Technical Data * Manufacturer: DECKEL MAHO Pjdpfx Alezkmq Iscjra * Model: DMC 1035 V * Year of Manufacture: 2007 * Control System: Heidenhain iTNC 530 * Travels (X/Y/Z): 1,035 × 560 × 510 mm * Table Size: 1,200 × 560 mm * Max. Table Load: 1,000 kg * Tool Holder: SK40 * Spindle Speed: up to 10,000 rpm * Tool Magazine: 30-position * Rapid Traverse: up to 30 m/min * Machine Weight: approx. 4,500 kg * Electrical Connection: 400 V / 50–60 Hz * Power Consumption: 22 kVA Equipment * ✅ Heidenhain iTNC 530 CNC control system * ✅ Electronic handwheel * ✅ Tool changer * ✅ Coolant system * ✅ Direct path measuring systems * ✅ Made in Germany The machine impresses with its robust design, high precision, and reliability. It is ideal for single-part and series production, as well as for demanding milling operations. Location: Germany Free loading.

Condition: used, Year of construction: 2001, Manufacturer: DECKEL MAHO (DMG) Model: DMU 70 VL Year of Manufacture: 2001 Control Unit: HEIDENHAIN TNC 430 Machine Type: 5-Axis Universal Machining Center Working Range / Travels: X-axis: 710 mm Psdpfx Aeyh Nm Sslcsra Y-axis: 520 mm Z-axis: 520 mm B-axis (Swivel range): -10° / +95° (NC-controlled) C-axis (Rotary table): 360° (NC-controlled) Work Table: Table Type: NC Swivel-Rotary Table Clamping Surface: Ø 700 x 500 mm Max. Table Load: 350 kg Milling Spindle: Max. Spindle Speed: 12,000 RPM (Motor Spindle) Drive Power (40% / 100% ED): 15 kW / 10 kW Tool Taper: SK 40 (DIN 69871) Tool Changer: Magazine Positions: 30 slots Max. Tool Diameter: 80 mm / 160 mm (with empty adjacent pockets) Max. Tool Length: 315 mm Max. Tool Weight: 6 kg Feed Rates & Motion: Rapid Traverse (X/Y/Z): 30 m/min Max. Feed Rate: 20,000 mm/min Weight & Footprint: Machine Weight: approx. 5,500 kg Total Power Requirement: 40 kVA Space Requirements: approx. 4.0 m x 3.0 m x 2.8 m Equipment & Features: High-End Control: Heidenhain TNC 430 5-Axis Capability: Full NC swivel/rotary integration.

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Predpswm Rrwjfx Alcoa Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Hours: 11,275 program hours x-axis travel: 500 mm y-axis travel: 450 mm z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Podoza T A Dopfx Alcsra Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, Tool changer with 60 positions Spindle speed 12,000 rpm Heidenhain iTNC 530 control unit Prodpfezva Uwsx Alcja Internal coolant supply (ICS) Chip conveyor 3D quickset

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The spindle was replaced on November 14, 2018. TECHNICAL DETAILS Travel in the X-axis: 880 mm Travel in the Y-axis: 630 mm Travel in the Z-axis: 630 mm Spindle speed: 12,000 rpm Controlled B-axis: -15° to +90° Tool holder: SK 40 Number of tool magazine slots: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Pedpszpw Iuofx Alcera Spindle operating hours: 50,033 h EQUIPMENT Coolant system

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Predpfx Alozu Ixnecsa Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, The machine is in very good condition, runs quietly, and operates with precision. TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 m/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Prodsymn Saspfx Alcsa Tool holder: SK 40 Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Internal coolant supply (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing unit Filtration system Note: The probing system is not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits Predjx Nr Tuspfx Alcsa • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective, display defective (loose connection)

Condition: ready for operation (used), Year of construction: 1989, operating hours: 38,800 h, spindle speed (max.): 4,000 rpm, total height: 2,995 mm, total width: 3,650 mm, overall weight: 15,100 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,500 W, product length (max.): 4,330 mm, tool weight: 15,000 g, number of axes: 3, This 3-axis MAHO 1600S universal machining centre was manufactured in 1989. It has approximately 38,800 machine hours and was operational until 2025 without notable issues. The machine features a functional coolant system and comes with available manuals and documentation. If you are looking to get high-quality machining capabilities, consider the MAHO 1600S machine we have for sale. Contact us for further details. • Main spindle drive power kW 22.5 • Tool interface ISO 50 • Tool clamping force kN 23 • Spindle speed range rpm 20–4000 • Spindle speed override % 80–120 • Feed rate X Y Z mm/min 1–4000 • Minimum programmable feed mm/min 0.01 • Rapid traverse m/min 10 • Feed and rapid override % 0–140 • Tool holder ISO 7388 Type B • Max tool diameter mm 160/210 • Max tool diameter adjacent free mm 125 • Max tool length mm 400 • Machine weight with tool changer kg 15500 • Max tool weight kg 15 • Compressed air approx bar 7 • Table size mm 980×1800 • T-slot spacing mm 100 • Max workpiece weight kg 3000 • Voltage V 220/380 Pedpfx Alsy Hizwocora • Frequency Hz 50 • Total connected load kVA 37.5 • Total load with coolant kVA 45.0 • Positioning resolution mm 0.001 • Last operational year 2025 • Condition ran until 2025 without notable issues • Documentation manuals available • Coolant system available functional • Tool changer/chain magazine not present/ included

Condition: excellent (used), Hello, I have for sale a Deckel Maho DMU 60T Machining Center. Control: Heidenhain 430 Machine Technical Condition – Excellent Year of Manufacture: 2000 Country of Manufacture: Germany Machine Specifications: Prodpfxsy Rb Dfj Alcsa X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Swiveling head Maximum spindle speed: 18,000 rpm Tool magazine: 24 tools (2 x 12 positions) Heidenhain linear scales on all axes Through-spindle coolant supply Chip conveyor High-pressure coolant system Central lubrication system Hydraulic tool clamping Spindle taper: SK40 Full programming manual Mechanical and electrical documentation Loading included in the price About us: For 19 years, Stal-Com has been engaged in the sale, servicing, and training on CNC machines from the DMG group. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. All machines undergo a meticulous technical inspection. Besides Polish customers, our machines are also purchased by clients throughout Europe and some parts of Asia. Each machine can be inspected during operation, as we additionally carry out machining services ourselves. After purchasing a machine from our company, we provide staff training and can also assist with commissioning the production of parts at the client's facility. We work with many companies on a long-term cooperation basis, supplying them with subsequent machine tools.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Universal machining centre Deckel Maho DMU 50 M with Heidenhain TNC 310 CNC control. Swivel-rotary table, SK 40 spindle taper with hydraulic drawbar. In good working condition, can be inspected under power. Pedpjytpy Ejfx Alcsra

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Prjdpey Diabefx Alcsa

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model na Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Prodpex D Dukofx Alcja Z-Axis Movement 400 mm This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,995 h, Control Unit Brand HEIDENHAIN TNC 530 Prjdpfxex D Iuuj Alcea Main Drive Number of axis 3 Movement X-Axis Movement 885 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Table Table load 600 kg This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Predpfex D Ntfjx Alcsa Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,450 h, travel distance X-axis: 835 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D with ShopMill, table width: 560 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,200 kg, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information. Additional equipment • Linear Encoder Measuring System • A-axis • Electronic Handwheel • Internal Coolant – 25 bar / 30 l/min • Cabin Roof • New Spindle Bearings Machine Benefits Technical Machine Benefits Prjdpfx Aoyrd Hwolcea • Tool mountings: sk 40 Extra Information Machine still under power Dimensions Machine Depth 2100 mm

Condition: excellent (used), Year of construction: 1996, operating hours: 9,700 h, DMG Vertical Machining Center Model: DMU 50 V Year of manufacture: 1996 5 axis Travel X-axis: 500 mm Travel Y-axis: 380 mm Podpfx Ajyvzq Nelcora Travel Z-axis: 380 mm Spindle taper: BT 40 Spindle speed : 8,000 rpm Tools in magazine: 24 piece Control: Deckel Maho Mill Plus Spindle hours: 9700 Interface: RS-232 C 30 tool holders

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, For sale is a 5-axis machining center from Deckel Maho, type DMU 35 M, with two manual rotary axes. The machine is in very good, immediately operational condition and, due to its compact size, is particularly space-saving. Psdpswal Aqjfx Alcjra Technical specifications: Year of manufacture: 1999 Control system: Siemens 840D ShopMill X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Feed rate: Continuous up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors for X, Y, and Z axes Clamping surface: Ø 400 x 280 mm Rotation range: 360° (mechanical) Table clamping: +105°/-150° (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamps: pneumatic/mechanical Space requirement: 3,800 x 3,600 x 2,100 Transport dimensions: approx. 2,000 x 1,700 x 2,100 Weight: 1,600 kg Electronic handwheel, chip tray Tool holders and vices are not included in the offer; these can be offered separately if required. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Prsdpfx Alovx N Shecea Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).