Used Masturn 550 for sale (2,651)

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Kledpfxomqty Uj Am Eer We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Klodok Abuijpfx Am Esr Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 Ksdpfomqty Rex Am Eolr frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Ksdpfxsk Abcrj Am Eelr Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece Klsdpfx Ask Aa Ryjm Esr RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Klsdpfjk Aba Tjx Am Eer Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Klodpfjk Aa Ebox Am Ejr Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1900-1800-550 RA1149 TYear of manufacture 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1800 mm conveying length: 1900mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. brake for dust operation on discharge track Ksdok Aa Eijpfx Am Ejlr drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Ksdpfx Ajk Aa T Rom Eolr Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 belt: double layer, green, smooth Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 Kledpsk Ablpofx Am Eor RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Kjdpfx Ajk Aa Nbjm Eelr Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Klsdpfx Aok Aa T Hom Eor Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 39654, type of input current: three-phase, There is still one machine available. The machine has been tested and is ready for operation. Klodpfxew Axb So Am Ejr

Condition: new, - Saw blade 550 mm - double miter Klsdpfxogg Nyrj Am Eer - 2 pneumatic clamps - Hydrocheck system - mist lubrication system - Roller conveyor with longitudinal stop - blow gun - protective cap - documentation - 400V

Condition: used, Year of construction: 2005, x-travel 2200 mm y-travel 2200 mm Klsdpfx Ajyquvaom Esr z-travel 1400 mm Control Siemens type 840 D size of pallet 1000x1250 mm 360 ° Table load 6000 kg spindle taper ISO 50 Tool changer 244 Pos. turning speeds 45-6000 U/min transmission ratio 2 Feed 60.000 mm/min Cooling through the spindle 50 bar weight of the machine ca. 50 t dimensions of the machine ca. 15,5x8,5x5,7 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t Kjdpfsrfd Thjx Am Eelr dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Carriage length: 3800 mm Scoring unit Electric adjustment of blade and scorer height and angle Electric positioning of right fence Touchscreen digital control panel Table equipped with additional blade switches Maximum blade diameter: 550 mm Total power: 7.35 kW Year of manufacture: 2014 Kedpfx Asymwy Tjm Eolr Power supply: 380 V

Condition: used, Can seamer Klodpfx Asyia U Asm Eor - Diameter range: 52 – 105 mm - Height range: 52 – 176 mm - Production capacity: up to 360 cans per minute

Condition: new, - new -Description:- Saw blade tilt and height adjustment is manual- Max. Cutting height 200mm- Scoring device with separate drive motor- Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹- High dead weight ensures vibration-free running- Large cantilever table with material roller- Rip fence with round bar guide- Extendable aluminum longitudinal fence with two folding stops- 7,5 kW main motor mounted on robust cast iron frame- Quadruple bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity- Multiple locking device on sliding table- Standard with table widening and table extension made of sheet steel- Large pendulum protection hood conveniently swivels up with the help of a gas pressure spring- Saw blade clamping via tool-free Rapid systemTechnical data:Dimensions and weightsLength approx. 3386 mmHeight approx. 1330 mmWidth/Depth approx. 3703 mmWeight approx. 1102 kgConnection suctionSuction port diameter 120 mmSuction port diameter saw blade guard 80 mmElectrical dataSupply voltage 400 VInput power 8,3 kWMotor speed 2800 min¯¹Mains frequency 50 HzOutput power 7,5 kWSliding carriage and tableFormat sliding carriage length 3200 mmFormat sliding carriage height 890 mmTable width 685 mmFormat sliding carriage width 416 mmTable length 1255 mmTable height 890 mmNoise emissionSound pressure level 96,5 dB(A)Circular saw unitCutting width with rip fence 1450 mmSaw blade inclination 90 - 45°Max. Cutting height 45°140 mmSpeed of saw blade 2800/3665/4800 min¯¹[Max. Cutting width to the left of the saw blade 3200 mmMax. Cutting height 90° 200 mmDiameter saw blade 550 mmScoring unitDiameter scoring saw blade 120 - 130 mmSpeed scoring saw blade 8000 min¯¹Item no.: 5200550 Ksdpfx Ajvxr Rgjm Ejlr

Condition: new, Tubend aluminum circular saw / underfloor saw AC 550 Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Feed of the saw blade steplessly adjustable Minimum quantity lubrication Kjdpfx Aokckx Uem Eslr 3m roller conveyor Description saw blade diameter: 550 x 32 x 4 mm speed 3580 rpm Cutting area 90° rectangular 260 x 200 mm Cutting area 90° square 155 x 155 mm Cutting area 45° rectangular 180 x 200 mm Cutting area 45° square 130 x130 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 3 kW Machine weight approx. 250 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen Kljdpfx Aoyud S Ejm Esr - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor Kodpfx Amjm Nb Ris Eelr >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: good (used), Year of construction: 2019, For sale is a used Format4 Kappa 550 panel saw with a cutting length of 2800 mm. The machine has been refurbished by our service team and is fully operational. Technical data: - Cutting length: 2800 mm Kledjytrq Hepfx Am Esr - Cutting width: 1000 mm - Cutting height: 202 mm - Max. saw blade diameter: 550 mm - X-motion control - Mitre guide with length compensation - Suction port diameter: 120 mm - Motor power: 7.35 kW / 10 HP - Year of manufacture: 2019 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, format saw Reference: R-J04DD

Condition: good (used), Year of construction: 2013, operating hours: 13,600 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, Linde H25T-02 Triplex 550 Freelift / Sideshift / Fork Positioner LPG 2013 Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and under AS-IS conditions without warranties (see our general terms and conditions). For viewing and/or a test drive, you are welcome to make a non-binding appointment. Please call in advance as we are not always present on site. Ksdpfxex Hlhgs Am Eelr Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Financing through our bank is also possible. Klsdpfx Ameifpg Ao Ejr komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!