Used Mazak Fh 680 for sale (347)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, General Information Machine Type: Vertical Machining Centre, Travelling Column Control Unit (CNC): MAZATROL Fusion 640M Year of Manufacture: 2003 Number of Axes (Controlled): 3 (Standard), 4 (Optional with rotary table) Travels and Working Area X-Axis Travel (Longitudinal): 1740 mm Y-Axis Travel (Cross): 760 mm Z-Axis Travel (Vertical): 660 mm Table Length: 2000 mm Table Width: 760 mm Maximum Workpiece Weight (Table Load): 1400 kg Spindle and Performance Spindle Taper: SK 40 (or ISO/BT 40) Maximum Spindle Speed: 12 000 min$^{-1}$ (rpm) Main Spindle Motor Power: 18.5 kW (Kilowatts) (Often a 10-min rating, continuous power may be lower) Rapid Traverse Rate (X-Axis): Up to 42 m/min (Metres per minute) Rapid Traverse Rate (Y/Z-Axes): Up to 36 m/min (Metres per minute) or 42 m/min (depending on configuration) Cutting Feed Rate: Up to 36 000 mm/min Tool Changer (ATC) Tool Magazine Capacity: 30 tools (Standard), 48 tools (Optional) Maximum Tool Weight: 8 kg Maximum Tool Length: 350 mm Maximum Tool Diameter (with adjacent tools): 80 mm Maximum Tool Diameter (without adjacent tools): 110 mm Machine Dimensions and Weight Machine Length (L): Approx. 4450 mm Gbedpfxex Eznts Adbei Machine Width (W): Approx. 3460 mm Machine Height (H): Approx. 3100 mm Machine Weight: Approx. 11 500 kg (11.5 tonnes) Coolant Tank Capacity: Approx. 450 l (Litres) Total Power Requirement: Approx. 46.7 kW Air Pressure Required: 5 - 9 bar

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Mazak QT10 + LNS Bar Loader Godpoym Tx Eofx Adbebi Technical Data: Working Area: - Max. swing diameter: 300 mm - Over cross slide: 190 mm - Max. turning diameter: 110 mm - Max. turning length: 256 mm Main Spindle: - Speed range: 60 – 6,000 rpm - Main drive power: 7.5 kW - Constant torque: 96 Nm - Bar work up to max. diameter: 40 mm Turret: - Number of tool stations: 8 Axes Travel: - Turret travel: - X-axis: 100 mm - Z-axis: 290 mm Traverse Speed: - Rapid traverse: - X-axis: 30.5 m/min - Z-axis: 33 m/min - Feed range: 0 – 5,000 mm/min Machine Data: - Total connected load: 23 kVA - Machine weight: approx. 2,700 kg - Machine dimensions (L x W x H): approx. 2.00 x 1.35 x 1.92 m STANDARD ACCESSORIES: - Tool presetting device (MAZAK Tool Eye System) - Fully enclosed work area with coolant and chip protection - Double foot switch for chuck open/close - Chuck status feedback (open/closed) - Work area lighting - Documentation SPECIAL ACCESSORIES: - Automatic chuck open/close M06/M07 - Indicator lamp for machining status - Various tool holders

Condition: excellent (used), Year of construction: 2018, MAZAK QUICK TURN 100MSY Max. turning diameter: 280 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA 3-jaw chuck for main spindle, diameter 169 mm - KITAGAWA 3-jaw chuck for secondary spindle, diameter 135 mm - Tool Eye - C-axis - C-axis on sub-spindle with 0.0001° resolution - Y-axis - Automatic parts catcher - Signal light (3-color LED) - Reinforced coolant pump - Chip conveyor Gbsdpfx Adeygi A Hobei - Standard MAZAK tool package

Condition: good (used), Year of construction: 2004, turning length: 2,000 mm, Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Gbjdpfjxvyq Esx Adbji Distance Between Centres: 2000mm Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Air Filer Mist

Condition: like new (used), Year of construction: 2022, functionality: fully functional, MAZAK QUICK TURN 250MSY x 1000U Maximum turning diameter: 380 mm Maximum machining length: 1,005 mm Max. main spindle speed: 4,000 rpm Max. sub-spindle speed: 6,000 rpm Max. bar capacity: 80 mm Godpfxjypa Tbj Adbobi The machine is equipped with: - CNC CONTROL Mazatrol SmoothG - KITAGAWA three-jaw chuck BB-210 for main spindle, diameter 254 mm - KITAGAWA three-jaw chuck B-206 for sub-spindle, diameter 169 mm - Tool Eye - C-axis - C-axis sub-spindle positioning accuracy 0.0001° - Y-axis - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - Standard MAZAK tool package

Condition: excellent (used), Year of construction: 2021, Mazatrol SMOOTH control unit Gbsdpjyp Iaiofx Adbei Max. Swing diameter: 695 mm Max. Machining diameter: 340 mm Max. Bar diameter: 35 mm Turning length: 600 mm Spindle speed 6,000 min-1 Counter spindle 12-position turret with driven tool Chip conveyor FMB bar feeder SL 80V

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Gsdpfx Adsyt E Nvebjbi Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Year of construction: 2012, condition: good (used), Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Gedpfsiyx Dijx Adbobi Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar Gedpfx Adstp Hgzebsbi chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, overall weight: 8,900 kg, table length: 550 mm, table width: 1,300 mm, controller model: 640 M, spindle speed (max.): 6,000 rpm, spindle speed (min.): 25 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg Gbodpfx Aeygw Ecodbji If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece weight (max.): 1,200 kg, total height: 2,900 mm, total length: 2,995 mm, total width: 2,350 mm, overall weight: 6,700 kg, table length: 550 mm, table width: 1,200 mm, coolant supply: 15 bar, rotational speed (max.): 12,000 rpm, rotational speed (min.): 35 rpm, table load: 1,200 kg, CNC Vertical Traveling Column Machining Centre CNC Control Mazatrol 640 M Table size 1200 x 550 mm Table load 1200 kg Number of pallets: 1 x Movement X-axis 1020 mm Movement Y-axis 510 mm Movement Z-axis 460 mm Spindle taper MAS BT 40 Spindle speed 35 - 12.000 1/min Gbedpfx Asygw D Ejdbei Spindle motor 22/15 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Gjdjyrvzmopfx Adbjbi Milling spindle speed:20,000 rpm Power:24 kW Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Software option III:Cylinder interpolation Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Condition: excellent (used), Year of construction: 2020, operating hours: 916 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 47 kVA, workpiece weight (max.): 500 kg, total height: 3,039 mm, total length: 2,350 mm, total width: 2,962 mm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, spindle nose: BT40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Center Mazak Variaxis C-600 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2020 Number of running hours: 916 [h] Number of simultaneous axes: 5 Stroke X axis: 650 [mm] Stroke Y axis: 550 [mm] Stroke Z axis: 530 [mm] Feed rate on X, Y and Z axes: 42000 [mm/min] Min. distance spindle nose / table: 50 [mm] Max. distance spindle nose / table: 580 [mm] Table dimensions: Ø600 x 500 [mm] Max. load on table: 500 [Kg] Stroke C axis : table revolution: 360 [°] B axis swivelling stroke: -30 [°] / +120 [°] Spindle type: BT40 Max. spindle speed: 12000 [rpm] Spindle power: 11 [kW] Tool changer magazin number of stations: 60 Max. tool length: 300 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 80 - 130 [mm] Total power required: 46.7 [kVA] Supply voltage: 400 [V] Machine dimensions: 2350 x 2962 x 3039 [mm] Layout dimensions: 5010 x 2470 [mm] Weight: 10000 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW part probe type RMP600 x1 RENISHAW tool probe type PRIMO LTS x1 RENISHAW calibration sphere x1 electronic handwheel x1 chip conveyor x1 high-pressure pump 15 [bar] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling machines, drill and tap machines, and CNC grinding machines. Gbjdpfx Ajyrcnmjdbsi

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, controller model: MAZATROL 640 T, overall weight: 4,000 kg, machine/vehicle number: 310163917, No reserve price – guaranteed sale to the highest bidder! Gbodpfx Adoym Dhwoboi Placing a bid obligates you to collect the item within the specified period: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS X-axis travel: 150 mm Z-axis travel: 250 mm MACHINE DETAILS Control: MAZATROL 640 T Operating voltage: 200 V Frequency: 50/60 Hz Rated current: 89 A Connected load: 17.8 kVA Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,200 mm Weight: 4,000 kg EQUIPMENT 12-position tool turret Tailstock External reference: Elos - Lot 16

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Max. swing diameter: 750 mm Max. machining diameter: 420 mm Max. machining length: 1,539 mm Max. milling speed: 4,500 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 102 mm Machine equipped with: - CNC CONTROL Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-212, diameter 304 mm - Tool Eye - C-axis - Y-axis - NC tailstock - Hydraulic SMW steady rest Gbsdpfx Adsya Du Robji - Main spindle with 102 mm bar capacity - Reinforced coolant pump - Chip conveyor, side discharge - 8 fixed tool holders - 2 driven tool holders

Condition: used, Year of construction: 1991, x-travel 6200 mm y-travel 1500 mm z-travel 508 mm Control Mazatrol type M 32 workpiece height 708 mm Gbodpsyqvdrefx Adboi Tool changer 60 spindle taper ISO 50 table surface area 6200x750 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1997, x-travel 3200 mm y-travel 1400 mm z-travel 508 mm table surface area 3000x1250 mm column daylight 1500 mm turning speeds 35-5000 U/min spindle taper ISO 50 control Mazatron M Plus Table load 5000 kg Tool changer 30 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Gbodpfjyqvaaox Adbei apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm control Mazatrol type Mazatrol T plus turning speeds 35-3500 U/min spindle passage 88 mm Tool changer 20 Pos. Spindle capacity 35 KW centre distance 1029 mm x-travel 450 mm z-travel 1029 mm weight of the machine ca. 7,5 t - Spindle nose: A2-8 - Axis C - Maximum feed: X = 12 m/min - Y = 10 m/min - Z = 18 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Godsyqu Hxepfx Adbebi If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1996, x-travel 1040 mm y-travel 510 mm z-travel 640 mm control Mazatrol type M Plus Tool changer 24 Pos. weight of the machine ca. 5,5 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Gbjdpfxsyqr Uyj Adboi More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1996, turning diameter . mm turning length . mm control Mazatrol type . . turning speeds . U/min spindle passage . mm Tool changer . Pos. Gbsdpfxeyqr S Ss Adbei Spindle capacity . KW centre distance . mm x-travel . mm z-travel . mm weight of the machine ca. 4,75 t Super Quick Turn The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2005, Make: MAZAK Type of machine: HCN-6000 Year of manufacture: 2005 Control system: Mazatrol 640M Machine's weight: 16.000 kg Tool holder: SK 50 x-travel: 800 mm Gbjdpfx Ajyc Sbksdbsi y-travel: 800 mm z-travel: 800 mm Speed range: 10.000 U/min max. Table load: 1.000 kg Table dimensions: 500 × 500 mm Number of tools in the magazine: 60 Plätze

Condition: ready for operation (used), Year of construction: 2004, Make: MAZAK Type of machine: INTEGREX 300-3ST Gbodpfxjyh I Rvs Adbji Year of manufacture: 2004 Control system: Mazatrol 640 CNC-Steuerung Machine's weight: 14.200 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Year of manufacture: 2008 Control system: Mazatrol Matrix Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Gsdpfx Aoyh I Tdedbjbi Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Gbjdpfx Adoxk U R Njboi Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, overall weight: 12,000 kg, table width: 2,000 mm, controller model: PC Fusion 640 M, spindle speed (max.): 12,000 rpm, spindle speed (min.): 40 rpm, table height: 760 mm, table load: 1,400 kg, CNC Control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Godpfoyddlwox Adbebi Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.