Used Mazak H 400 for sale (367)

Condition: good (used), Year of construction: 2001, Data will follow.... Fedpfx Aox Tgznsbujpc

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm Fpedpfx Ajtugggjbuec turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm Fpedoydvfcepfx Abusc

Year of construction: 2012, condition: good (used), Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Fpodpfsiyx Dijx Abusc Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table Fedpfetp Hgzjx Abuopc 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 1997, condition: ready for operation (used), Controls: MAZATROL M PLUS, weight: 5.85t, operational hours counter: 42,150h, with magazine and accessories. Fsdpfx Absiph Ukouopc

Condition: excellent (used), With C-axis, with driven tools MAZAK Mazatrol 640T control Turning length -982 mm Swing Diameter -610 mm Fsdpou R Nd Esfx Abuopc Turning diametre 264 mm Spindle speeds - 4'000 rpm Tool changer with 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2023, condition: ready for operation (used), number of axes: 5, This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Additional equipment • 36 tool change Fsdpfx Asyaqvuebuspc • Includes tailstock function Machine Benefits Technical Machine Benefits • The machine has a 36 mm tool • A 12 to 15 bar flushing system • Tailstock function • Cooling water cooling • Bar puller function • Milling spindle 12000 rpm • Main and counter spindle • 1 degree swivel b-axis Extra Information OPM probe tool measurement Optional: Capto C6 tool holders

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 575 mm, spindle motor power: 18,500 W, total height: 1,975 mm, overall weight: 5,150 kg, controller manufacturer: MAZATROL, controller model: PC Fusion CNC 640 T, number of axes: 2, This Mazak SQT 200 MS was manufactured in 1999. A robust horizontal turning machine featuring a turning diameter of 300 mm and a length of 534 mm. It includes a spindle speed up to 5000 rpm and motor power of 18.5 kW. Ideal for precise and efficient turning operations. Contact us for more information. Machine Benefits Technical Machine Benefits • Turning length: 534 mm • Turning diameter: 300 mm Fodpfxsyaqibj Abuepc • Diameter above the bed: 350 mm • Diameter above transversing slide: 350 mm • Number of driven tools: 12 Extra Information Working condition. Full documentation available. Dimensions Machine Depth 3025 mm

Condition: ready for operation (used), Year of construction: 2015, number of axes: 5, This 5-axis Mazak VTC 800/30SR was manufactured in 2015, featuring a 600mm rotary table (Nikken CNC601MA), 70 bar high-pressure cooling, and a 48-tool magazine. It includes Renishaw probe preparation, RMP60Q touch probe, and CAD/CAM software TOPSOLID 7.18 with a floating license. Consider the opportunity to buy this Mazak VTC 800/30SR vertical machining centre. Contact us for more information about this machine. • 70 bar high-pressure cooling • 48-tool magazine • Center partition Additional equipment Fpjdpfx Abox Imq Souec • 600 mm rotary table (Nikken CNC601MA) • Renishaw probe preparation • RMP60Q touch probe • CAD/CAM software with floating license TOPSOLID 7.18 • Post-processor for the specified machine

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details x-travel 2000 mm y-travel 650 mm z-travel 650 mm Control Mazatrol 640 M weight of the machine ca. 12 t Additional information Mazatrol 640 M CNC Control Travels: X-axis 2000 mm Y-axis 650 mm Z-axis 650 mm Fpsdpfx Abjx S Edroujc Spindle speed 6000 rpm with two gear stages Tool holder SK 50 Spindle motor power 18.5 kW Table size: 2240 x 650 mm Machine weight 12000 kg Equipment: Dual pallet changer (2PC) 4-axis Kitagawa rotary table Tool changer with 60 tool positions Zero Clamp zero-point clamping system Mayfran chip conveyor Coolant system with 70 bar pressure Internal tool cooling ILT internal extraction system with air filter

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 345 mm, travel distance Z-axis: 462 mm, controller manufacturer: MAZATROL, controller model: Smooth G, number of axes: 2, This Mazak Mega Turn 500 was manufactured in 2017. A robust vertical turning machine featuring a Mazatrol Smooth G control unit, it offers a maximum workable diameter of 500 mm and includes a 12-position turret plus a 10-station ATC with Capto C6. Additional features include a high-pressure coolant system at 15 bar and an automatic tool presetter. Contact us for more information about this machine. Additional equipment Fpsdeyalppopfx Abusc • High Pressure Coolant System: 15 bar • Automatic Tool Presetter: Yes Machine Benefits Technical Machine Benefits • Maximum workable diameter: 500 mm • Turret configuration: 12-position turret + 10-station atc with capto c6 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: MAZATROL, controller model: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6" hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • There are 2 units available Technical Machine Benefits • Chuck type: 6" hydraulic chuck with bar capacity max /spindle speed: 4000 rpm max /power: 30 kw / 22 kw continuous/ max torque: 500 nm /spindle nose: a2-8/ acceleration time: 5. 1 seconds • Type: 6" hydraulic chuck max speed: 4000 rpm max power: 26 kw / 22 kw continuous /max torque: 724 nm /spindle nose: a2-8 /acceleration time: 2. 7 seconds • Max speed: up to 20000 rpm (optional) /max power: 18. 5 kw/ max torque: 119 nm/ taper type: km63, capto c6, bt40 • X-axis: 410 mm/ y-axis: ±70 mm (total 140 mm) /z-axis: 805 mm/ b-axis (milling head): 210° rotation/ c-axis (spindle): 0. 0001° resolution (full contouring) • Max turning diameter: approx. ø545 mm/ max turning length: approx. 600 mm Fsdpfx Asyalpiobujpc • Tool capacity: 20 tools standard, expandable to 120 /changer type: high-speed cam-driven system • Heavy-duty construction with linear guides “done in one” multi-tasking concept for single-setup machining/ cnc control: mazatrol matrix with 3d simulation/ intelligent thermal shield for automatic thermal compensation

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l Fpjdpfx Aoyalpcjbuec

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 4,500 rpm, controller manufacturer: MAZATROL, controller model: 640T NEXUS, number of axes: 2, This 2-axis Mazak QTN 250M 1000L was manufactured in 2004, offering reliable performance as a horizontal turning machine. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250M 1000L machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Maximum machinable diameter: 380 mm Fpedpfx Aboyaln Seuoc • Maximum workable length: 600 mm • Bar capacity: 76 mm • Self-centering dimensions (main spindle): 250 mm • Spindle nose (main spindle): asa 8 • Spindle hole (main spindle): 88 mm • Tail stock race: 1000 mm cone: 4 cm • Cooling tank capacity: 300 liters Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 630 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: MATRIX, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information. Machine Benefits Fsdoyallkspfx Abuepc Technical Machine Benefits • Number of tools (atc magazine): 80 • High pressure through the spindle: 20 bar Extra Information Machine still under power Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table load: 500 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This Mazak NEXUS 5000 II was manufactured in 2007. It features a table size of 500 x 500 mm, capable of handling weights up to 500 kg. Equipped with a high-speed spindle at 18,000 rpm and a spindle motor power of 18.5 kW, it ensures efficient machining. Includes a 40-position tool changer and Mazatrol Matrix control for enhanced precision. Contact us for more information about this machine. Additional equipment Fpedeyalldspfx Abuec • Chip conveyor • CNC handwheel • CTS 20 bar • 40-position tool changer • tool integrity sensor Machine Benefits Technical Machine Benefits • 500 kg • Table dimensions: 2 x 500 x 500 mm • Indexed table • Cee certified • Includes manuals Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information. Additional equipment • Swarf Conveyor Machine Benefits Technical Machine Benefits • A-axis: -120° / +30° • C-axis: 360° Fpjdpsyalk Hsfx Abusc Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, total height: 2,692 mm, table load: 700 kg, overall weight: 5,500 kg, number of axes: 3, This 3-axis Mazak VTC-20B was manufactured in 1996. It features a Mazatrol M-Plus or M-32B controller, with axis travels of X=1120 mm, Y=510 mm, and Z=510 mm. The table supports up to 800 kg, and the spindle operates at speeds up to 10,000 rpm. Note: the handwheel requires repair. Contact us for more information about this machine. Machine Benefits Fodpfxeyalics Abuspc Technical Machine Benefits • Size: 1460 × 510 mm • Tool magazine: 24 pocket Extra Information The handwheel is not fully operative and needs a repair. Dimensions Machine Depth 2997 mm

Condition: excellent (used), Year of construction: 2017, MAZAK vertical machining center in excellent condition. Built in 2016, first use in april 2017. Only used for occasional and simple machining tasks > only 2500 spindle hours (!) Including: High pressure cooling through spindle (15 bar) Dividing wall (removable) Mayfran chip conveyor on left side Synchronous tapping Viewing of the machine in running condition is possible upon appointment. Availability: end of February 2026 Cnc control Mazatrol Matrix Nexus 2 Number of Axes 3 X-axis Travel 1740 mm Y-axis Travel 530 mm Z-axis Travel 510 mm Spindle Speed 12000 RPM Tool taper CAT Number of tool positions 30 Fedpfx Aeya Etusbujpc Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2020, 5-Axis CNC Machining Center - Universal - Manufacturer: MAZAK Machine Model: Variaxis J-500 Control Unit: Mazatrol SmoothG Year of Manufacture: 2020 Number of Controlled Axes: 5 TECHNICAL DATA Travel - X-Axis (mm): 350 - Y-Axis (mm): 550 - Z-Axis (mm): 510 - Swivel Range A-Axis (degrees): -120 / +30 - C-Axis (rotary axis, rotary and tilt table): (degrees): 360 Feed Rate X/Y/Z (mm/min): 8,000 Rapid Traverse - X-Axis (mm/min): 30,000 - A-/C-Axis: 10,800 degrees/min. Spindle - Max. Spindle Speed (rpm): 12,000 - Drive Power (ED) 100 / 40 (kW): 7.5 / 11.0 Fsdpsyabu Iefx Abuopc Tool Magazine - Tool Holder: BT40/CAT40 - Pull Stud: Yamazaki ANSI Type - Number of Tool Positions: 30 - Tool Diameter (mm): 90 - Tool Length (mm): 300 Machine Table: Swivel rotary table Pallet System - Pallet Changer: 2-position - Clamping Table Dimensions (mm): 500 x 400 Swivel Rotary Table - Rotary Table Diameter (mm): 500 x 400 - Max. Workpiece Weight (kg): 200 FEATURES + Through-spindle coolant 70 bar + Hinged belt chip conveyor + Oil mist extractor + Tool length measurement and breakage control + Additional interior lighting + Signal tower (3-color) Subject to change and errors in technical details and specifications.

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 4,000 rpm, spindle motor power: 18,500 W, overall weight: 5,000 kg, controller manufacturer: MAZATROL, controller model: T Plus, This Mazak SQT 250M was manufactured in 1998. It is a horizontal turning machine, ideal for precision machining tasks. Contact us for more information about this machine. Additional equipment • Parts Catcher and Parts Counter Machine Benefits Technical Machine Benefits • Rapid feedrates: 30 m/min • Chuck size: 250 mm kitagawa chuck b-210a615 Fpodpfxoyaix Is Abujc • Bar capacity: 64 mm • Features: complete with standard and live tooling • C axis & milling, c axis: 0. 001° Extra Information Machine still under power

Condition: used, Year of construction: 2019, Mazak Quick Turn 200MB Control: Mazatrol Smooth G Year of manufacture: 2019 Turning length: 500 mm Maximum swing: 695 mm Maximum machining diameter: 380 mm Maximum machining length: 541 mm Chuck size: 8" X-axis: 234 mm Z-axis: 625 mm Fsdpeyhph Sjfx Abuopc Main spindle: - Power: 26 kW - Max spindle speed: 5,000 rpm - Spindle nose: A2-6 - Spindle bore: 76 mm - Max bar diameter through spindle: 65 mm Turret: - 12 tool positions (VDI type) - 12 driven positions - Milling drive power: 5.5 kW - Max speed: 5,000 rpm - Interface for bar feeder - Through-spindle coolant pressure up to 15 bar - Automatic part catcher The machine is in very good condition, includes standard tools and driven tools. Serviced 2026-01-12. Year of manufacture: 2019 * Max spindle speed: 5,000 rpm * Spindle nose: A2-6 * Spindle bore: 76 mm * Milling drive power: 5.5 kW * Max speed: 5,000 rpm Turning length: 500 mm X-axis: 234 mm Chuck size: 8" * Power: 26 kW Z-axis: 625 mm

Condition: ready for operation (used), Year of construction: 2000, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information. Additional equipment • chip conveyor is included Machine Benefits Qualitative Machine Benefits • 2019: new spindle motor and spindle, recirculating ball screws in x and y axes • 2024: new recirculating ball screw in x axis due to a material defect. Technical Machine Benefits • Rapid traverse: 36 m/min • Workpiece: 24-axis changer • Tools: coolant pump: 5-bar • Tools: internal and external cooling Extra Information Fpodpfx Absyaaw Ujuec Machine still under power

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,000 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,585 mm, number of slots in tool magazine: 72, number of axes: 7, This 7-axis Mazak Integrex i-300ST-1500U lathe was manufactured in 2012. It features a main spindle bar passage of 80mm, a tool changer with a capacity of 72 tools, and a milling spindle speed of 12,000 rpm. Additional highlights include a high-pressure cooling system at 14 bar, a chip conveyor, and a mist filter unit. Ideal for prototype production, the machine includes tooling, chucks, and jaws. For more information about this lathe, please reach out to us. Additional equipment • Mist filter unit • High pressure cooling (14 bar) • Work space rinse cleaning (2.7 bar/60 l) • RMP600-Radio/Radio probe • Preparation for 70 bar cooling through spindle • Programmable overload detector • C-axis on second spindle • MO321 - Gear milling without tool • TE810 - Preparation for Multi and Flash tools • NO117 - Tool edge control for 5-axis continuous / Axes movements: X / Y / Z / X2 / Z2 615 / 250 / 1585 / 230 / 1388 mm / W 1539 mm / C-axis indexing 0.0001° Machine Benefits Qualitative Machine Benefits • Comprehensive equipment for diverse machining operations (turning, milling, drilling, threading, etc. ) • Used exclusively with mazak service technicians • Lower turret number of tools 9 Technical Machine Benefits • Main spindle bar passage: 80mm Fodpfxox U Txij Abuepc • Milling head (b axis) speed: 12. 000rpm • No123 - tool radius correction for 5-axis continuous control • No137 - eia dynamic compensation i • No092 - synchronous threading for driven tool • Eia/iso continuous 5-axis control • Extensive tool capacity with 72-tool magazine (hsk-63 holders) • Advanced 5-axis continuous control with various compensation and correction features • Max. Machining diameter 658 mm / max. Machining length 1519 mm / max. Workpiece weight 450 (1st spindle) / 400 (2nd spindle) kg • Main spindle motor power 30 (30 min. ) / 22 (continuous) kw / subspindle motor power 26 (30 min. ) / 22 (continuous) kw / Extra Information Machine still under power