CNC lathe

MAZAK QTN Nexus 250IIMY

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Dsdpfx Aezk I R Aoizowd Technical data shown on pictures.

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED Dwodpfx Aioyuqacezod ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Max. machining diameter: 280 mm Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - Interface for bar feeder - Automatic parts catcher - NC tailstock Dedpfx Aiezv D H Rezjwd - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Dwsdpfx Aieyvtugozod

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Dodpeuz If Nefx Aizowd Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control Dwsdpfxsyx U Its Aized 500 mm between centers Max. turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Machine price: €29,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €36,500 excluding VAT This machine is available for inspection in Genk and can be powered on for demonstration!

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Dedpfxjzx Ur Ne Aizswd

Condition: used, Year of construction: 2002, turning diameter 280 mm turning length . mm control Mazatrol 640 T x-travel 190 mm y-travel 309 mm z-travel 330 mm turning speeds 4000 U/min feed 30 m/min Dwodpfxjzdu T Do Aizjd number of tools 12 bar loader ja total power requirement 24 kvA weight of the machine ca. 3,5 t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, centre distance 2.500 mm centre height 250 mm grinding wheel diameter 600 mm Total travel of the grinding support 320 mm spindle speeds 50 - 450 mm tool adaptor MK5 tail stock MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Dedpfxsx Avtcs Aizjwd Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x  Stones and Flanches included Centre height: 647mm Grinding Ø: 1295mm Grinding length: 4267mm Grinding stone dimensions:914 x 152 mmmm Grinding stone speeds: 400 - 1200Rpm Cooling system: Yes Length: 8500mm Width: 4500mm Height: 3200mm Weight: 78000kg Dedpfx Asv Dia Asizswd Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!