Used Mazak Variaxis 500 for sale (341)

Condition: used, Year of construction: 2016, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Hnedoy R Iw Ejpfx Apnsl Year of manuf. : 2016 Control : Siemens 840 Dsl Speed : 18000 rpm Movement X/Y/Z : 3000/800/720 mm Tool holder : SK 40 In General: Year of manufacture:2016 Control system:Siemens 840 Dsl Travel ranges X/Y/Z:3 mm Table size:3,500 x 820 mm Max. table load:2,500 kg Spindle speed:18,000 rpm Tool holder:SK 40 Spindle: Technology:Direct drive spindle Speed:18,000 rpm Max. power:approx. 35 kW Max. torque:approx. 100 Nm Tool holder:SK 40 NC swivel head Technology:Swivel head with milling spindle B-axis:+/- 110° NC rotary table: Technology:Attachable rotary table A/C axis:360° Tailstock:For shaft machining (A-axis configuration) Tool magazin: Technology:Travelling chain magazine Number of stations:48 Tool changer:Double gripper Max. tool diameter:80 (130) mm Max. tool length:350 mm Equipment: Chip removal:Chip conveyor Coolant supply:Internal coolant, 70 bar Pendulum machining:Partition wall Shaft machining:A-axis + tailstock Workpiece measurement:Renishaw RMP 60 Tool measurement:Breakage monitoring Set-up operation:Electronic handwheel Technology package:5-axis milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Hnedpfx Apey Hkhrenjl Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h EQUIPMENT Measuring probe (manufacturer: Renishaw) Chip cart 47 SK50 tool holders, including approximately 25 Weldon holders Emulsion cleaning unit

Condition: good (used), Year of construction: 2012, Max cutting diameter 584mm, 845mm swing, 165mm bar capacity, 2,000rpm spindle 24 station turret, 30kW motor power, 3 jaw chuck, Mazatrol Matrix Nexus control, tool setter, tailstock, swarf conveyor, fixed steady Hodpfeyu N Tzjx Apnsnl

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,300 rpm, spindle motor power: 30,000 W, overall weight: 9,100 kg, controller manufacturer: MAZATROL, controller model: Mazatrol Matrix, number of axes: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Additional equipment • Chip conveyor • Tool presetter • Autoblock chuck • Toolholders • User and maintenance manuals Machine Benefits Hnjdpfx Apex D I Rienol Technical Machine Benefits • Max. Turning diameter: Ø 420 mm • Max. Turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: asa 11” • Chuck type: autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tool motor power: 7. 5 kw • Max. Speed of driven tools: 4000 rpm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2006, operating hours: 66,174 h, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,778 mm, table load: 500 kg, overall weight: 4,920 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis Mazak NEXUS 410A vertical machining centre was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a tool capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 410A machine we have for sale. Contact us for further details. • Table size: 900 x 410 mm • T-slots: 3 slots, 18 mm, 125 mm spacing • Spindle speed range: Stepless • Spindle taper: CAT 40 • Spindle bearing inner diameter: 70 mm • Spindle acceleration: 2.04 s • Rapid traverse: 36 m/min • Cutting feed: 1 to 8,000 mm/min (up to 36,000 mm/min) • Axis acceleration: 0.5 G • Max. tool diameter: 80 mm Hnsdpey Htgdjfx Apnel • Max. tool diameter (adjacent empty): 125 mm • Max. tool length: 350 mm • Tool change time: 2.9 s • Spindle motor (AC): 18.5 / 15 / 11 / 7.5 kW • Power requirement: 27.8 / 22.82 kVA • Air supply: 5 bar, 200 l/min • Footprint: 2,000 x 2,600 mm • Spindle hours: 66,174 h

Condition: good (used), Year of construction: 2006, Max cutting diameter 420mm, 750mm swing, max cutting length 1524mm, 102mm bar capacity, 3300rpm spindle, Hnjdpsyt H Tvofx Apnol 4000rpm milling, 12 station turret, 30kW motor power, 3 jaw chuck, Mazatrol 640T Nexus control, 0.001 degree C axis, tool setter, tailstock, swarf conveyor

Condition: good (used), Year of construction: 2014, Swing over bed 660mm, maximum machining diameter 380mm, maximum machining length 510mm, bar capacity 80mm, Hjdpfx Aeyt H Ruepnenl spindle speed 4,000rpm, 12 station turret, Mazatrol Smart control, swarf conveyor, & 3 jaw chuck

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 190433, turning length: 1,050 mm, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,050 mm, controller model: Mazatrol Matrix, TECHNICAL DETAILS Max. turning diameter: 660 mm Swing over bed: 760 mm Turning length: 1,050 mm X-axis: 580 mm Y-axis: 150–160 mm (?) Z-axis: 1,050 mm Main spindle speed: 5,000 rpm Counter spindle speed: 5,000 rpm Milling spindle: 12,000 rpm Hjdpfxsy Slqfs Apnonl MACHINE DETAILS Weight: 11,800 kg Main power circuit: 3-phase AC Main power circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current draw: max. 84 A Main motor voltage: 400 V Rated power: 91.8 kVA EQUIPMENT

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 178979, turning length: 309 mm, turning diameter: 280 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, controller model: Mazatrol 640T Nexus, No reserve price – guaranteed sale to the highest bidder! Hnodpfx Apoy Sln Rensl The technical data is sourced from the manufacturer's information. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Max. turning diameter: 280 mm Max. machining length: 309 mm Swing diameter: 550 mm X-axis travel: 190 mm Z-axis travel: 330 mm Spindle bore: 61 mm Rapid traverses X/Z: 30/33 m/min MACHINE DETAILS Control: Mazatrol 640T Nexus Main power circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current: 31 A Main motor voltage: 400 V Rated power: 24 kVA Weight: 3,500 kg Note: The bar feeder is not included in the offer.

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 350MB 1250U Max. swing diameter: 830 mm Max. turning diameter: 420 mm Max. turning length: 1,250 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Machine is equipped with: - CNC control Mazatrol SmoothG - SMW three-jaw chuck KNCS 400, diameter 400 mm Hnodpfjy Igz Dsx Apnjl - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 2017, turning diameter 340 mm turning length 1000 mm Hnedpfoy E Txdex Apnel control Mazatrol SmoothC

Condition: used, Year of construction: 2003, X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feed: 30 000 mm/min Feed rate: 8 000 mm/min Speed range: 40 - 12 000 rpm Table : 2 000 x 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot distance: 100 mm Max. table load: 1 000 kg Spindle distance to table: 180 - 690 mm Spindle center to stand: 530 mm Hnsdpfxoy Nlv Nj Apnol Table height: 750 mm X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feeding: 30 000 mm/min Feeding: 8 000 mm/min Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. board load: 1 000 kg Distance from spindle to table: 180 - 690 mm Spindle distance to table: 180 - 690 mm Fast feed: 30 000 mm/min Spindle center to stand: 530 mm Feed rate: 8 000 mm/min T-slot distance: 100 mm Max. table load: 1 000 kg Table height: 750 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265771, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 560 mm, workpiece weight (max.): 20 kg, The technical data is based on manufacturer specifications. The seller cannot guarantee its accuracy! TECHNICAL DETAILS Travel X-axis: 195 mm Travel Z-axis: 560 mm Maximum spindle speed: 5,000 rpm Rapid traverse X-axis: 30 mm/s Rapid traverse Z-axis: 33 mm/s Maximum turning diameter: 350 mm MACHINE DETAILS Control: Mazatrol Smart Main power circuit: 3-phase AC Hedoy Saiiepfx Apnenl Main power circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current consumption: max. 53 A Main motor voltage: 400 V Rated power: 29.1 kVA Dimensions & Weight Machine dimensions (L x W x H): 2,650 x 1,700 x 1,700 mm Machine weight: 4,500 kg

Condition: excellent (used), Year of construction: 2024, MAZAK INTEGREX i-100H Max. machining diameter: 600 mm Max. machining length: 590 mm Max. milling speed: 12,000 rpm Max. spindle speed: 6,000 rpm Machine is equipped with: - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools - KITAGAWA 3-jaw chuck B-206, diameter 169 mm - Tool Eye - C-axis input accuracy 0.0001° - Y-axis - B-axis 0.0001° Hodjy Hwn Eopfx Apnonl - 5-axis machining package for SmoothAi - Reinforced coolant pump 15 bar - Chip conveyor, side discharge

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Control: Mazatrol preview with LAN / USB incl. cooler Hedpjhturvofx Apnsnl incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads incl. 10 x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm plastics possible to cut Hedohturcspfx Apnsnl incl. software incl. exhauster to test under power ! option: warranty, setup, training

Year of construction: 2012, condition: refurbished (used), MAZAK laser cutting machine STX510 MkIII 4kW Hedpfx Apenwmw Sononl ==TOP CONDITION – OVERHAULED 2023== year: 2012 refurbished, MAZAK lasercutting machine with 4000W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster == option: warranty, setup, training == == option: fully automatic loading/unloading CELL system ==

Condition: good (used), Year of construction: 1989, functionality: fully functional, Mazatrol T32 control, turret, tailstock, extensive accessories Hnedpjy H Iz Nsfx Apnsl

Condition: used, Year of construction: 2003, Mazak Integrex E-410H Multi-Tasking Lathe with Mazatrol 640M Pro Control, Serial No. 164385 (2003). Country of Origin: Japan Hjdpfsx T Df Dox Apnonl Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Type of machine: QuickTurn Nexus 250-II Hnedpfjy I Uvisx Apnel Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Tool holder: BMT Speed range: 4.000 1/min Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 10,974 h, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Fusion 640 M, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, overall weight: 6,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, tool weight: 8,000 g, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information. - Distance Table Surface to Spindle Nose: 180-690 mm- Spindle Taper: SK 40 CAT- Max Tool Diameter: 80 mm (110 mm with free adjacent pockets)- Max Tool Length: 350 mm- Accessories/Features: EIA/ISO programming, Automatic tool length measurement system, Synchronous tapping, 3 free M functions, 1 complete set of manuals- Working Hours (Servo X-Axis): 76,203 hours- Working Hours (Spindle): 75,952 hours Additional equipment • chip conveyor is included Machine Benefits Qualitative Machine Benefits • 2019: new spindle motor and spindle, recirculating ball screws in x and y axes • 2024: new recirculating ball screw in x axis due to a material defect. Hnsdpfx Apsyaaw Uenol Technical Machine Benefits • Rapid traverse: 30 m/min • Workpiece: Automatic Tool Changer (ATC), Capacity: 24 positions • Tools: coolant pump: 5-bar • Tools: internal and external cooling Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: good (used), Year of construction: 1992, functionality: unexamined, turning length: 500 mm, turning diameter: 300 mm, For sale: 1 used CNC lathe Manufacturer: Yamazaki Mazak Corp. Model: Quickturn 10N-U Year of manufacture: 5/1992 Specifications: Spindle speed: 36 – 3,600 rpm Octagonal turret Fully automatic tailstock Max. workpiece length: 507 mm Turning diameter: 300 mm The machine can be viewed at our warehouse in 09599 Freiberg. Hnodpfey Huvysx Apnjl

Year of construction: 2008, operating hours: 36,239 h, condition: used, machine/vehicle number: 205849, Traverse paths (x/y/z): 230/100/575 mm, power: 46.2 kVA, weight: 5,200 kg, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, MAZATROL Matrix Nexus control, !!!Collection: 03.+04.06.2026!!! Hsdsyztf Njpfx Apnjnl

Year of construction: 2019, operating hours: 13,324 h, condition: used, machine/vehicle number: 298546, Travel distances (x/y/z): 230/100/575 mm, power: 47.4 kVA, weight: 5,600 kg, 16-position tool changer, Y-axis, new main spindle mid-2025, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, LNS Quick Load Servo 65 bar feeder, serial no.: 17000 200363, year of manufacture: 2025, 1 mesh box with accessories, 1 stool, !!!Collection: 21st + 26th May 2026!!! Hnodpfxoyztgao Apnel

Condition: used, Year of construction: 2021, operating hours: 8,350 h, machine/vehicle number: 323618, 4 axes, travel paths (x/y/z): 560/640/640 mm, weight: 10,200 kg, power: 71.7 kVA, 40-position tool changer, 2-position pallet changer, internal coolant supply, SK-40 tool holder, chip conveyor, !!!Pick-up: 21st+26th May 2026!!! Hnodpfsyztd Sox Apnol