Used Mazak Vcn 410 for sale (340)

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Iodpfxev Tvive Apnoib Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80

Condition: used, Year of construction: 2007, Mazak Nexus HCN 6000-II Twin Pallet Horizontal Machining Centre. S/No. 196442 (2007) with Mazatrol Matrix Nexus Control, Pallet Size 500 x 500mm, 60 Position ATC, High Pressure Coolant & Filtration System, Through Spindle Coolant, Spindle Speed 7000rpm, Spindle Taper CAT40, Rinishaw Tool Setter, Swarf Conveyor. Please Note: Back-End Spindle Tool Holders Only, Consumable Tools Not Included. Country of Origin: Japan Iiodeyzhfdepfx Apnsb Location: This lot is located in Bornago, Italy. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Ijdpfx Apoy Hkhrsnjib Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h EQUIPMENT Measuring probe (manufacturer: Renishaw) Chip cart 47 SK50 tool holders, including approximately 25 Weldon holders Emulsion cleaning unit

Condition: good (used), Year of construction: 2012, Max cutting diameter 584mm, 845mm swing, 165mm bar capacity, Iisdpfsyu N Tzsx Apnjb 2,000rpm spindle 24 station turret, 30kW motor power, 3 jaw chuck, Mazatrol Matrix Nexus control, tool setter, tailstock, swarf conveyor, fixed steady

Condition: used, Year of construction: 2016, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2016 Control : Siemens 840 Dsl Speed : 18000 rpm Movement X/Y/Z : 3000/800/720 mm Tool holder : SK 40 In General: Year of manufacture:2016 Control system:Siemens 840 Dsl Travel ranges X/Y/Z:3 mm Table size:3,500 x 820 mm Max. table load:2,500 kg Spindle speed:18,000 rpm Tool holder:SK 40 Spindle: Technology:Direct drive spindle Iijdpfx Apjy R Iw Eeneb Speed:18,000 rpm Max. power:approx. 35 kW Max. torque:approx. 100 Nm Tool holder:SK 40 NC swivel head Technology:Swivel head with milling spindle B-axis:+/- 110° NC rotary table: Technology:Attachable rotary table A/C axis:360° Tailstock:For shaft machining (A-axis configuration) Tool magazin: Technology:Travelling chain magazine Number of stations:48 Tool changer:Double gripper Max. tool diameter:80 (130) mm Max. tool length:350 mm Equipment: Chip removal:Chip conveyor Coolant supply:Internal coolant, 70 bar Pendulum machining:Partition wall Shaft machining:A-axis + tailstock Workpiece measurement:Renishaw RMP 60 Tool measurement:Breakage monitoring Set-up operation:Electronic handwheel Technology package:5-axis milling

Condition: used, Year of construction: 1991, spindle bore: 51 mm, bar passage: 51 mm, Mazak SQT-15MS CNC gantry Specifications * Manufacturer: Mazak * Model: SQT-15MS Iodsy Snhmjpfx Apnjib * Year: 1991 * Control: Mazatrol T-32 * 12-position turret * Live tooling * Sub spindle * Machine weight: approx. 5,500 kg Condition The machine has been used in production and is sold in working condition unless otherwise agreed. Inspection under power can be arranged upon request. Additional Information * Loading assistance can be arranged at additional cost. * More photos and videos available upon request.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,300 rpm, spindle motor power: 30,000 W, overall weight: 9,100 kg, controller manufacturer: MAZATROL, controller model: Mazatrol Matrix, number of axes: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Additional equipment • Chip conveyor • Tool presetter • Autoblock chuck • Toolholders • User and maintenance manuals Machine Benefits Technical Machine Benefits • Max. Turning diameter: Ø 420 mm Iiodpfx Ajx D I Rispnsb • Max. Turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: asa 11” • Chuck type: autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tool motor power: 7. 5 kw • Max. Speed of driven tools: 4000 rpm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, A Mazak CNC 5-axis machining center with a dual pallet changer is available. Spindle power: 22kW, speed: 10000rpm, rapid traverse: 42m/min, tool positions: 80, tool holder: SK50, coolant pressure: 70bar, control system: Mazatrol Matrix. Including CNC option package Performance, preparation for Monitoring System B, Mayfran Consep 2000 chip conveyor and tool length measuring device. Documentation available. An on-site inspection is possible. Iodpfjy R Dt Aox Apneib

Condition: good (used), Year of construction: 2006, Max cutting diameter 420mm, 750mm swing, max cutting length 1524mm, Iedpfx Asyt H Tvepneib 102mm bar capacity, 3300rpm spindle, 4000rpm milling, 12 station turret, 30kW motor power, 3 jaw chuck, Mazatrol 640T Nexus control, 0.001 degree C axis, tool setter, tailstock, swarf conveyor

Condition: good (used), Year of construction: 2014, Swing over bed 660mm, maximum machining diameter 380mm, maximum machining length 510mm, bar capacity 80mm, spindle speed 4,000rpm, 12 station turret, Isdpfsyt H Ruex Apneib Mazatrol Smart control, swarf conveyor, & 3 jaw chuck

Condition: used, Year of construction: 2011, Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Maximum detail size: Ø 800 x 1000 mm Max load capacity: 700 kg Spindle speed: 12 000 r/min - High-torque Spindle effect: 22/30 kW , 300 Nm (AC40HP) CAT 40 Tool changer: 40 positions Interface for coolant system Prepare for probe OMP60 Cromar conveyor Synchronised tapping G00 slope constant Iisdpfx Apey H Dnxjnjb EIA EIA 3D COMP Scaling included loading of machine included tools and cubes Mazak HC Nexus 5000-II: LxWxH: 475 x 238 x 285 cm Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Max load capacity: 700 kg Tool changer: 40 positions

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 350MB 1250U Max. swing diameter: 830 mm Max. turning diameter: 420 mm Max. turning length: 1,250 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Ijdpfxsy Igz De Apnjib Machine is equipped with: - CNC control Mazatrol SmoothG - SMW three-jaw chuck KNCS 400, diameter 400 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 2017, turning diameter 340 mm turning length 1000 mm control Mazatrol SmoothC Ijdpfsy E Txdjx Apnsib

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm Iodpfxjy Ey N Nj Apnoib • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms • EXW sale • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor

Condition: used, Year of construction: 2003, X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feed: 30 000 mm/min Feed rate: 8 000 mm/min Speed range: 40 - 12 000 rpm Table : 2 000 x 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot distance: 100 mm Max. table load: 1 000 kg Spindle distance to table: 180 - 690 mm Spindle center to stand: 530 mm Table height: 750 mm X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feeding: 30 000 mm/min Feeding: 8 000 mm/min Iisdpfx Apsy Nlv Nsneb Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. board load: 1 000 kg Distance from spindle to table: 180 - 690 mm Spindle distance to table: 180 - 690 mm Fast feed: 30 000 mm/min Spindle center to stand: 530 mm Feed rate: 8 000 mm/min T-slot distance: 100 mm Max. table load: 1 000 kg Table height: 750 mm

Condition: excellent (used), Year of construction: 2024, MAZAK INTEGREX i-100H Max. machining diameter: 600 mm Iijdpfxoy Hwn Eo Apnob Max. machining length: 590 mm Max. milling speed: 12,000 rpm Max. spindle speed: 6,000 rpm Machine is equipped with: - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools - KITAGAWA 3-jaw chuck B-206, diameter 169 mm - Tool Eye - C-axis input accuracy 0.0001° - Y-axis - B-axis 0.0001° - 5-axis machining package for SmoothAi - Reinforced coolant pump 15 bar - Chip conveyor, side discharge

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Control: Mazatrol preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads incl. 10 x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Iiodpfjhturvjx Apneb Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster to test under power ! Iodehturcjpfx Apnjib option: warranty, setup, training

Year of construction: 2012, condition: refurbished (used), MAZAK laser cutting machine STX510 MkIII 4kW ==TOP CONDITION – OVERHAULED 2023== year: 2012 refurbished, MAZAK lasercutting machine with 4000W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut Iedpfx Apsnwmw Sjneib incl. software incl. exhauster == option: warranty, setup, training == == option: fully automatic loading/unloading CELL system ==

Condition: good (used), Year of construction: 1989, functionality: fully functional, Mazatrol T32 control, turret, tailstock, extensive accessories Iedpfx Apjy H Iz Nonsib

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel X-axis: 870 mm Travel Y-axis: 500 mm Travel Z-axis: 1,598 mm Main spindle Max. spindle speed: 3,300 rpm Main spindle drive power: 30 kW / 22 kW Max. torque main spindle: 588 Nm Main spindle nose: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Iiedpfx Asy Akpnepnob Sub spindle Max. spindle speed: 3,300 rpm Sub spindle drive power: 30 kW / 22 kW Max. torque sub spindle: 588 Nm Sub spindle nose: A2-11" Indexing: 0.0001 Milling spindle Milling spindle drive power: 37 kW Max. torque milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min MACHINE DETAILS Control: Mazatrol 640M PRO Tool holder: SK50 Number of tool stations: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required floor space (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Infinitely variable speed adjustment 120-position tool magazine High-pressure coolant 70 bar Renishaw Laser measuring system for rotating tools Interface set Air / water cooling through the spindle Overload monitoring system Mayfran Consep 2000 chip conveyor SMW quick-change chuck

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Type of machine: QuickTurn Nexus 250-II Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Iijdpfx Asy I Uvijpneb Tool holder: BMT Speed range: 4.000 1/min Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 2,500 mm, Mazak INTEGREX 50YR-2500U – Technical Data Iijdpfx Aeyuucnjpneb Machine type: CNC Turning/Milling Center / Multitasking Manufacturer: Mazak Control: MAZATROL PC-Fusion CNC 640MT Year of manufacture: 1999

Condition: ready for operation (used), Year of construction: 2000, operating hours: 10,974 h, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Fusion 640 M, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, overall weight: 6,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, tool weight: 8,000 g, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information. - Distance Table Surface to Spindle Nose: 180-690 mm- Spindle Taper: SK 40 CAT- Max Tool Diameter: 80 mm (110 mm with free adjacent pockets)- Max Tool Length: 350 mm- Accessories/Features: EIA/ISO programming, Automatic tool length measurement system, Synchronous tapping, 3 free M functions, 1 complete set of manuals- Working Hours (Servo X-Axis): 76,203 hours- Working Hours (Spindle): 75,952 hours Additional equipment • chip conveyor is included Machine Benefits Qualitative Machine Benefits • 2019: new spindle motor and spindle, recirculating ball screws in x and y axes • 2024: new recirculating ball screw in x axis due to a material defect. Technical Machine Benefits • Rapid traverse: 30 m/min • Workpiece: Automatic Tool Changer (ATC), Capacity: 24 positions • Tools: coolant pump: 5-bar Iiedpjyaaw Uofx Apnob • Tools: internal and external cooling Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2016, operating hours: 24,872 h, machine/vehicle number: 274448, 5 axes, travel paths (x/y/z): 350/550/510 mm, weight: 6,900 kg, power: 34.7 kVA, chip conveyor, 30-position tool changer, SK 40 tool holder, internal coolant supply, rotary table Ø: approx. 50 cm, error message after restart: data loss, 1 tool cabinet with 7 drawers, with accessories, !!!Collection: 10th+11th June 2026!!! Iodsyztfpspfx Apneib