Used Mazak Vtc 20 C for sale (349)

Condition: excellent (used), Year of construction: 2001, x-travel 185 mm z-travel 360 mm b-travel 460 mm control Mazatrol 640 T Maximum swing diameter 550 mm Maximum turning diameter 280 mm workpiece weight max. 200 kg bar capacity 51 mm main spindle speed 35-6000 U/min milling head speed 25-4500 U/min rapid power traverse in X-and Z direction 30/33 m/min Rapid traverse B axis 30 m/min tool turret 12 Plätze weight of the machine ca. 4100 kg Itjdpfx Aoyukf Sjbved Capacity: Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret edge: 80–535 mm Main spindle: Speed: 35–6000 rpm Spindle bore: 61 mm Counter spindle: Speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling drill: 16 mm Milling tap: M12 End mills: 16 mm Milling spindle speed: 25–4,500 rpm Equipment/Accessories: Tool holders Tools Powered tools Turning tool holders Coolant system Chip conveyor Documentation

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Isdpfxjtuggge Abvotd Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Ijdpfx Ajwngklobvetd Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: good (used), Year of construction: 2016, turning length: 1,585 mm, spindle motor power: 22,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 230 mm, total height: 3,100 mm, total length: 6,100 mm, total width: 3,230 mm, overall weight: 16,600 kg, Multi-tasking lathe MAZAK - Integrex i-200ST x 1500U MACH-ID 9450 Make: MAZAK Type: Integrex i-200ST x 1500U Ijdpfxjyrcxlo Abvotd Control: Smooth Mazatrol Year: 2016 5 Axis Simuteneous EIA/ISO Milling spindel with Threading Function Extra M-Code (1 pair for 2-M-Code) Preparation RMP-60 Sub spindel with C Axis any C1 + C2 Synchronisation IKZ with 70 Bar main spindel IKZ with 15 Bar on lower Revolver Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3 chuck Max. turning Ø: 658mm X-Axis: 260mm Y-Axis: 1585mm Z-Axis: 230mm B Axis: 360° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 65mm Subspindle power: 22kW ATC / revolver: 36 Speed live tools: 12000Rpm B-Axis Toolsystem: HSK-63 Positions lower revolver:9 Speed live tools: 6000Rpm Power live tools: 5,5kW Length: 6100mm Width: 3230mm Height: 3100mm Weight: 16600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1990, turning length / mm control / centre height / mm CNC Turning Center MAZAK MULTIPLEX 420 For sale: CNC turning center Mazak MULTIPLEX 420 with 2 spindles and 2 turrets. Ideal for series production and complete machining. Itedpfx Aeyvkw Ejbved Accessories: Comes with a large set of accessories (see pictures). Machine in good condition. Inspection possible by appointment. Feel free to get in touch if interested.

Condition: used, Year of construction: 1995, turning length / mm control / Itodpsyvkv Ijfx Abved centre height / mm MAZAK MULTIPLEX 620 MARK II CNC turning and milling center including FLEX-GL100N portal loader with two spindles and two turrets

Condition: used, turning length / mm control / centre height / mm Iodpfjyu U Hasx Abvstd MAZAK MULTIPLEX 420 CNC turning and milling centre, including FLEX-GL100 gantry loader, with two spindles and two turrets

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg Itjdpfsyh N Aaox Abvsd X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus X-Axis Travel: 1050 mm Y-axis travel: 510 mm Z axis Travel: 510 mm

Condition: good (used), Mazak Integrex E-410H Multi-Tasking Lathe Mazatrol 640M Pro Control, 610mm Turning Dia Serial No. Ijdevgzuwspfx Abvotd 164385 (2003)

Condition: used, turning length / mm control / centre height / mm MAZAK SUPER QUICK TURN 15M-Y MARKII CNC lathe Travel distances X-axis: 180 mm Y-axis: 100 mm (± 50 mm) Z-axis: 620 mm Spindle Speed range: 35 – 5,000 rpm Power Motor power: 15 kW (approx. 20 hp) Itsdpoyukidofx Abved Equipment/accessories Extensive accessory package (see images) Various tools and holders Additional accessories included in delivery as shown in the image

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW Iodpfx Aswix E Robvetd max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... *

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg Ijdpfx Aewix Hhobvstd workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, Machine details Manufacturer/Model: Mazak Quick Turn Nexus 250M Year of manufacture: 2006 (11/2006) Control: Mazatrol 640T Nexus Turning length: 1,200 mm Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Max. spindle speed: 4,000 rpm Turret: 12-station Chuck: Kitagawa 12" hydraulically actuated 3-jaw chuck Tailstock present Ijdpfx Abowfynfovotd Machine weight: approx. 7,500 kg Accessories 4 × driven tools Multiple Mazak tool holders in the turret Additional jaws and accessories available Chip conveyor, coolant tank Loaded onto truck, free of charge.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,200 mm, Equipment: documentation/manual, Mazak Quick Turn Nexus 350M CNC turning center with Mazatrol 640T Nexus CNC control Year of manufacture: 2004.11 Turning length: 1,200 mm Itsdpfx Ajx Dccyobvsd Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Maximum spindle speed: 4,000 rpm 12-position tool turret Kitagawa 12-inch hydraulic 3-jaw chuck Tailstock Machine weight: 7,500 kg Includes various turret-mounted tool holders, 4 driven tool holders, and additional accessories. Accessories: 4 driven tools Mazak tool holders Chip conveyor

Condition: used, functionality: fully functional, Year of construction: 2016, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Mazak, laser type: fiber laser, laser source manufacturer: IPG, sheet thickness (max.): 20 mm, power: 4 kW (5.44 HP), total length: 4,000 mm, total width: 2,000 mm, year of last overhaul: 2023, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Well-maintained Mazak Optiplex II Laser Cutting Machine Sheet capacity: 4x2 meters 4 kW – Mostly used for cutting steel and stainless steel up to 8 mm, occasionally 12-15 mm. Itedpfx Absyrybqeved Machine has been used for in-house production. Received 1 to 2 maintenance services per year, always properly carried out. After relocation, the machine became redundant and is currently unused due to the purchase of a second machine. Immediately available. Installation services can be provided if required.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, This 3-axis Mazak VC PRIMOS 400S was manufactured in 2016. This vertical machining center features a table size of 1500 x 670mm, a maximum load capacity of 1300kg, and a spindle speed of 20,000rpm. It includes a tool magazine with 20 places and 2 pallets. Ideal for precision machining, buy this Mazak VC PRIMOS 400S vertical machining center. Contact us for further details regarding this vertical machining center. Machine Benefits Technical Machine Benefits Itjdpoyi El Nsfx Abved • Rapid feed x-y-z 60 m/min • Table size 600 x 400 mm • Tool magazine 14 positions/ tool shank bt-30 accessories/chip conveyor

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing Iodpfx Absx Enllevstd • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function • Compliance: CE marking Additional equipment • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. • Tool magazine: 30 positions • Control: Fusion • Table size: approx. 1300 × 550 mm • Cooling: 15 bar internal (through-spindle) pressure Technical Specification Taper Size SK 40 Itodpfxsx Enlrj Abvod

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: MAZATROL, controller model: 640M Nexus, number of axes: 4, This 4-axis Mazak NEXUS HCN 6000 was manufactured in 2006. It features a Mazatrol 640M Nexus control, 800 mm travel in X, Y, and Z axes, and a B-axis rotation of 360°. The spindle speed reaches up to 10,000 rpm, and it includes a 120-position tool magazine. The table can handle loads up to 1,000 Kg. Consider the opportunity to buy this Mazak NEXUS HCN 6000 turn-mill centre. Contact us for more information. Itedpfjygl Ncsx Abvsd • B-axis rotation: 360° • Table size: 500 x 500 mm • Permissible load: 1,000 kg • Tool magazine: 120 positions • High pressure coolant: 70 bar Additional equipment • Chip evacuator (chip conveyor) Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,371 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, total height: 2,933 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, tool weight: 8,000 g, product length (max.): 2,570 mm, number of axes: 5, This 5-axis Mazak CV5-500 vertical machining center was manufactured in 2023. It features a maximum spindle speed of 12,000 rpm, a dual-stage electric gear, and a rapid traverse rate of 36 m/min in X, Y, and Z axes. The machine supports a table load of 200 kg and includes a 30-position automatic tool changer. Ideal for complex, multi-axis precision machining. Contact us for more information about this machine. • Electrical load • Apparent power (40% duty): 45.5 kVA • Permanent apparent power: 43.4 kVA • Electrical connection: 3-phase AC 380/400/415/440/460/480 V ±10%; 50/60 Hz ±1 Hz • Pneumatics • Pressure: 5–9 bar • Flow rate: 26 l/min • Air blow-off through spindle: 345 l/min • Spindle • Spindle nose: Steep taper 40° • Gear stages: 2-stage (electric) • Rated power (AC inverter motor): 18.5 kW (10% duty), 15.0 kW (25%), 11.0 kW (40% and continuous) • Max torque: 119.4 Nm (10%), 95.5 Nm (25%), 70.0 Nm (40%); continuous 57.3 Nm • Axes, feeds, rapids • Number of simultaneously operating axes: 5 • Rapid traverse X/Y/Z: 36 m/min • Rapid traverse B/C: 30 min⁻¹ • Feed rates X/Y/Z: 36,000 mm/min • Table • Diameter: 500 mm • Tapped holes: M16 × 2 • Reference bore: Ø50 mm H6 (+0.016 / −0.000 mm) • Workpiece capacity • Max diameter: 500 mm • Max height: 320 mm • Travels / Working area • B-axis swivel/indexing: 220° (±110°), 0.0001° • C-axis swivel: 360° • Distance spindle nose – table top (horizontal): 50–520 mm • Distance spindle nose – table center (vertical): 95–565 mm • Automatic tool changer • Tool positions: 30 (optional magazine: 48) • Selection: Random, shortest path • Tool holder: MAS BT 40 or SK 40 • Pull bolt: Yamagaxi ANSI type • Max tool diameter: 80 mm (adjacent occupied) / 125 mm (adjacent free) • Max tool length: 300 mm • Tool change time (chip-to-chip): 4.60 s • Tank capacities • Guideway/ballscrew lube: 1.80 l • Hydraulic oil: 5.0 l • Spindle coolant: 26.0 l • Option: 18,000 min⁻¹ spindle coolant (oil tank): 60 l • Total tank capacity: 320.0 l Additional equipment • Monitoring/sensing package • Analog inputs: 4 × 0–10 V • Digital inputs: 8 • ACC-SENSOR.1AXIS.10M: 1‑axis accelerometer with 10 m cable • Active power sensor (Dimensions: 8105 × H85 mm) • Toolscope IP for DIN rail Rev.4 • Industrial PC functionality in the control cabinet • Communication and control via HMI • PM: Tool and process monitoring • Tool breakage detection • Self-learning wear limit • Fixed and dynamic tolerance bands • Process performance monitoring strategy • Collision monitoring with all Goliog • DIN rail mounting in the control cabinet • Dimensions: 812 × H90 × D62 mm • Documentation including Toolscope • Chip conveyor (dimension reference provided: machine width 3,365 mm including chip conveyor) Iedpfxeyf H Tyj Abvjtd

Condition: ready for operation (used), Year of construction: 2023, operating hours: 154 h, travel distance X-axis: 215 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 605 mm, total height: 1,725 mm, total width: 1,690 mm, overall weight: 4,650 kg, controller manufacturer: MAZATROL, controller model: SMOOTH Ez, number of axes: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, and Z axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Additional equipment • Transformer for Europe (CE) • Roller guide with spherical roller bearings • SD memory card I/F + USB memory I/F • 1 Set of control keys • Foundation kit (steel plates) • CE Marking (With noise filter) • C-axis Positioning 0.0001° Increment Ijdpfxox D R Svs Abvstd • 12-Position Turret • Y-Axis Control • Interface bar feeder Extra Information Automatic part trapper High pressure cooling Preparation for chip conveyor 8" Open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic pecking cycle with load detection Quick-change cutter holder system Bar diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret Number of tool positions: 12 Tool size (External turning): 25 mm Tool size (Internal turning): 40 mm Tool size (Driven drill): 20 mm Tool size (Driven end mill): 20 mm Tool size (Driven tap): M20 Indexing time 1 step: 0.23 s Indexing time full revolution: 0.63 s Tail Stock Center bore (morse taper): MK No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools Milling spindle power (continuous power): 3.7 kW Milling spindle power (40% ED): 5.5 kW Maximum milling spindle speed: 4500 min-1 Minimum milling spindle speed: 20 min-1 Media Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine Depth 2785 mm

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function • High surface smoothing on contours (High Smoothing Control) • Mazatrol-to-ISO program conversion • Program memory expansion • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros Ijdsyhcviopfx Abvetd • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN-510C NEXUS was manufactured in 2004. It features an X-axis travel of 1,050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer with 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-510C NEXUS vertical machining centre we have for sale. Contact us for further details. Itjdpfx Aoylxy Eobvjd • Tool changer: 30 positions • Coolant system: Through-spindle • CE documentation: Yes • Control unit: FUSION 640 Additional equipment • High-pressure coolant system • Chip conveyor Technical Specification Taper Size ISO 40

Year of construction: 2023, condition: ready for operation (used), number of axes: 5, This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Additional equipment • 36 tool change • Includes tailstock function Machine Benefits Technical Machine Benefits • The machine has a 36 mm tool • A 12 to 15 bar flushing system • Tailstock function • Cooling water cooling • Bar puller function • Milling spindle 12000 rpm • Main and counter spindle • 1 degree swivel b-axis Extra Information OPM probe Iedpfx Abjyaqvujvotd tool measurement Optional: Capto C6 tool holders

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 22,000 W, number of axes: 3, This 3-axis Mazak Multiplex 6200 was manufactured in 1999 and features dual spindles with a maximum speed of 5,000 rpm and a drive power of 22/15 kW each. It includes an ABB robot and turrets on both the right and left with 12 tools each. Rapid traverse rates are 30.5 m/min for the X-axis and 33 m/min for the Z-axis. If you are looking to get high-quality turning capabilities consider the Mazak Multiplex 6200 machine we have for sale. Contact us for more information. Machine Benefits Isdpfsx Nr S Djx Abvotd Technical Machine Benefits • Right and left turrets: 12 tools each • Axes: 3; including abb robot • Main motor: 200 v