Used Mc Km 250 for sale (28,370)

Condition: excellent (used), mileage: 325,072 km, power: 412 kW (560.16 HP), first registration: 05/2008, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2008, Equipment: air conditioning, BELGIAN TRACTOR UNIT ORIGINAL 325,000 km = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,882 cc Axle configuration Front axle: Steered; Suspension: Leaf suspension Rear axle 1: Steered; Suspension: Air suspension Iodjxv Evyepfx Addjal Rear axle 2: Twin wheels; Suspension: Air suspension Weights Unladen weight: 7,820 kg Payload: 18,180 kg Gross vehicle weight: 26,000 kg Condition Technical condition: Very good Optical condition: Very good Further information Please contact Thierry Leemans for more information.

Condition: ready for operation (used), total width: 2,011 mm, NIKON-Metris X: 1000 – Y: 2500 – Z: 800 mm Het LK V-SL- model beschikt over een revolutionair ontwerp dat de beste scan- en inspectieprestaties levert van alle werkende CMM#39;s op de markt. De multisensor LK V-SL coördinatenmeetmachine onderscheidt zich door zijn unieke karakter en voldoet aan de eisen van de automobiel- en lucht- en ruimtevaartindustrie. Dankzij de mogelijkheid om zeer nauwkeurige metingen uit te voeren (HA – High Accuracy), versterkt dit systeem als referentie-CMM voor metrologielaboratoria en biedt het een submicronnauwkeurigheid voor toepassingen die de hoogste meetnauwkeurigheid ingewikkeld. Laatste kalibratie: 19-09-2024 Renishaw-besturingssysteem: -Probekopcontroller: PHC 10-2 -Interfaceselector 191-2 -Probe-interface PI 200 -TP 200 Renishaw-meettaster Laserbesturingssysteem. LC60DX De LC60Dx is ontworpen voor 3D-laserscanning met hoge snelheid en een gemiddeld bereik op coördinatenmeetmachines (CMM#39;s). Het apparaat biedt uitstekende prestaties bij het scannen van grote onderdelen, zoals mallen, autopanelen of structurele componenten, met een nauwkeurigheid tot 9 micron. Renishaw PH10M - Gemotoriseerde indexerende meetkop Rotatie-assen: A-as: ±180° B-as: 0–115° Indexeringsstap: 7,5° → wat een totaal van 720 positieve positieve positieve resultaten oplevert Interface: Autojoint/M8-aansluiting (compatibel met modulaire testsystemen zoals Renishaw TP200, SP25M of Nikon/Metris laserscanners) Maximaal stylusgewicht: ca. 300gr Maximale styluslengte: tot 300 mm Positie herhaalbaarheid: ±0,4 µm (0,0004 mm) Toepassingen: Meting van onderdelen met complexe vormen (turbinebladen, mallen, behuizingen, enz.) Wordt gebruikt in combinatie met probes zoals Renishaw SP25M, TP200 of Nikon/Metris LC15Dx Compatibel met de meeste CMM-merken (DEA, Hexagon, Mitutoyo, Wenzel, LK, etc.) SCHUNK - snelwissel-klemsysteem voor gebruik op CNC-machines. Het is bedoeld voor het vastzetten van pallets, het opspannen van werkstukken op de machinetafel met een zeer hoge positioneringsnauwkeurigheid (tot 0,005 mm). Fabrikant: SCHUNK (Duitsland) Model: VERO-S NSE plus 90 Type: Snelwisselklemmodule Modulediameter: 90 mm Bedrijfsdruk: 6 bar Klemkracht: tot 25.000 N (25 kN) Materiaal: gehard roestvrij staal Bediening: Pneumatische bediening met mechanische zelfvergrendeling Positioneringsnauwkeurigheid: ≤ 0,005 mm Ijdpfxjxl Hxuj Addjal

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 45,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,250 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), T-Way AD410T54 8x4 Cursor 13-540 HP, wheelbase 4250 mm, 2 units, MY 25, 12-speed HiTroniX automated transmission, permissible gross vehicle weight 32–45 tonnes, new vehicle, without registration. Wheelbase 1875++ mm, 2-year factory warranty from first registration. White, code 50105 IC 194. T-Way AD410T54 8x4 Cursor 13-540 HP, wheelbase 4250 mm, 2 units MY 25, 12-speed automated HiTroniX, GVWR 32–45 tonnes, brand new vehicle, MY 2025, wheelbase 1875 mm, 2-year factory warranty from first registration, white code 50105 IC 194. SPECIAL EQUIPMENT: POWERTRAIN: 13R22.5 DRIVE tires, preparation for PTO including switch in dashboard and wiring along chassis frame. NH/4C right-side PTO for pump. CAB EXTERIOR: Headlamp guards, LED beacon left and right, transparent sun visor mounted outside on the cab roof, flat white cab roof. CAB INTERIOR: Leather steering wheel, air horn behind bumper (compressed air), electronic immobilizer and two vehicle keys. CHASSIS: 2 reinforced rear torsion bars, diameter 65 mm, tipper version, reinforced front stabilizer, 13-leaf parabolic spring rear axle, radiator protection under bumper for demanding off-road use. MAIN FEATURES: Rear frame overhang: 1225 mm, tubular rear underrun protection R58.03, trailer version for towing operation with continuous brake system, rear axle ratio: 4.23, end crossmember D-value: 200 kN. FUEL ECONOMY & CONNECTIVITY: Expansion module for control of auxiliary drives, Adaptive Cruise Control (ACC). SAFETY: Side marker lights, retarder/intarder for ZF or Allison automatic transmissions. ADDITIONAL EQUIPMENT: 13R22.5 tires. Iedpfex Dyduex Addjal PACKAGES: Manual air conditioning, air suspension for cab, pull-down sun blind for driver and passenger side window, luxury air-suspended heated driver's seat, multi-adjustable with right armrest, lumbar and head support with integrated 3-point seat belt, 290-liter fuel tank, weight variant 8000/8000/26000 kg.

Condition: ready for operation (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm, Tailstock, 10” Chuck, Swarf Conveyor, Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Iajdpfxew Rrzae Addjl Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Ex works - £54,950.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica Iaedpfx Adeu Rda Iodsl - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Iedpfx Aexf E Twoddjal Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), - x-coordinate: 0 ... 250 mm - y-coordinate: 0 ... 125 mm Iaedpfexr Ap Nox Addsl - z-carriage with measuring head: 190 mm - max. height of measuring object: 170 mm - permissible mass of measuring object: 50 kg For all further technical data, please refer to the images starting from image 5.

Condition: good (used), KMD 2-50KK Reduction Gearbox Flender Extruder Krauss Maffei Reduction gearbox for KMD 2-50KK. Used but functional. The part is original and shows signs of corrosion and contamination due to storage. Private sale, no guarantee or warranty. Iodpfxoxzd T Uj Addeal We also have some spare parts for Krauss Maffei extruders in stock (e.g. control cabinets, hydraulic units, gearboxes KMD 2-90, etc.) – please enquire. €8,500

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm Isdorfd Thjpfx Addsal thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: used, Three-phase motor, electric motor -Power: 2.5/1.5 kW -Speed: 1420/2930 rpm Iasdsdwpdropfx Addol -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 480/210/H230 mm -Weight: 39 kg

Condition: used, mileage: 197,411 km, power: 184 kW (250.17 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 9,180 kg, maximum load weight: 5,820 kg, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 5,900 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: other, emission class: euro5, number of seats: 2, loading space length: 6,500 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, immobilizer system, tail-lift, * German vehicle * 1st hand * Original only 197,411 kilometers * See photos for condition * Special vehicle for pollutant collection * Body manufacturer Dünnschede * Foldable box wall * MBB tail lift * max. load capacity 1500 kg * Special stainless steel shelving system * Stainless steel floor pan * Special restraint system for shelf/ container * Interior lighting * Emergency shower * Hand wash basin * Case heating * Acceptance door on the right with staircase * Interior dimensions length 6,500 mm x 2,450 mm x 2,200 mm height * Leaf/air suspension + raise/lower * Cab with 2 air-sprung comfort seats * Seat heating * Air conditioning * Differential lock * Engine brake * Cruise control * Electric windows * heated electric mirrors * Reversing camera * Turn assist with camera and screen * Spare wheel holder * Storage box * Wheelbase 5.90m * 15,000 kg gross vehicle weight * Unladen weight 9,180 kg * Payload 5,820 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. Iedpfxovhqare Addsal - .

Condition: used, functionality: fully functional, Year of construction: 2017, control type: NC control, Motorized Guillotine Shear Manufacturer: Knuth Model: KMT 2500 x 4.0 mm Year of manufacture: 2017 Technical Data Brand: Knuth Model: KMT Year: 2017 Working length: 2550 mm Sheet thickness: 4.0 mm (450N/mm²) Cutting angle: 1.5° Strokes/min: 42 Motor power: 7.5 kW Weight: 3.2 t Dimensions: L 3.10 x W 1.70 x H 1.30 m Equipment • Support arms • Motorized backgauge 600 mm • Pneumatic sheet supports • NC control • Cutting line illumination Iajdjw Naghepfx Addol • Foot switch All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2020, operating hours: 837 h, functionality: fully functional, power: 75.02 kW (102.00 HP), fuel type: diesel, gearing type: hydrostat, Equipment: air conditioning, soot filter, KÄRCHER MC-250 Vacuum Sweeper Technical Data: Drive type: Diesel Drive: Two-wheel drive Engine manufacturer: VM Engine power (kW): 75 Emission standard: Euro 6e Driving speed (km/h): 60 Working width with 2 side brushes (mm): 2625 Maximum working width with 3 side brushes (mm): 2710 Sweeping container (liters): 2500 Fresh water tank (liters): 200 Fresh water tank (optional) ( ): 390 Permissible total weight (kg): 6000 Dimensions (L × W × H) (mm): 4491 x 1300 x 1999 Particle filter Comfort seat Heating and air conditioning Heating Sweeping container: 2500 l Radio system Rotating warning beacon Water tank: 120, 400 l Iaodpfx Adswpkpuodol Year-round use This KÄRCHER MC250 is from the year 2020, has only 837 total operating hours and 368 sweeping hours according to the counter, and is in very good overall condition with minimal signs of use and wear, freshly serviced, ready for immediate use, comparable new price €200,000! - Gross price €129,000 // Net price €108,400 - Viewing / test drive gladly possible - Nationwide shipping can be organized, costs depend on distance! - We would be happy to provide you with an attractive leasing / financing offer through our leasing partner!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 750 mm, turning diameter: 365 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 6,000 rpm, Mori Seiki NL 2500 SMC/700 with sub-spindle TECHNICAL DETAILS Control: MSX-850III Main spindle size: A2-8 Counter spindle size: A2-6 Main spindle bore: 80 mm Main spindle speed: 4,000 rpm Integrated main spindle motor: 18.5 kW Integrated motor for counter spindle head: 11 kW C-axis: main and counter spindle Motor starting torque: 640 N/m Turning diameter: 755 mm Iodpfx Adowqc T Usdoal Machinable diameter: 365 mm Machinable length: 750 mm Speed of powered tools: 6,000 rpm Direct drive motor for powered tools: 5.5 kW Indexing time for turret change: 0.2 s Turret slots: 12 stations, all powered Rapid traverse speed: 30 m/min (X and Z axes) MACHINE DETAILS Weight: 6,500 kg Short bar loader: LNS Quick Load Servo II Measurement: Two arms for automatic measurement of Renishaw tools Interfaces: via USB, PCMCIA card, and RS 232 EQUIPMENT - C-axis on both spindles - Hainbuch clamping system BZI 65 - Three-jaw chuck Schunk 165 mm - Oil cooler for both Daikin spindles - Interface for bar feeder - Automatic parts gripper - Foot pedal for independent opening and closing of main and counter spindle chucks - Knoll filtration system with high-pressure pump - Transformer - Documentation

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW Iasdpfxsf Nb Hgs Addol weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.

Year of construction: 2022, condition: new, Bending length max. 2545 mm Bending capacity max. 4.5 mm Angular range of the bending beam 0 - 135 degrees Upper beam stroke 25 mm Engine power hydraulic pump 7.5 kW Travel of the bending cylinder 400 mm Travel of the pressure cylinder 75 mm Travel of the back gauge 800 mm Work table height 910 mm Iasdjl D Rnnspfx Addjl Weight 4,200.00 kg Dimensions 3400x2010x1700mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,940 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, controller model: Heindenhain TNC 430, table load: 3,600 kg, rotational speed (min.): 120 rpm, rotational speed (max.): 12,000 rpm, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, number of slots in tool magazine: 32, Vertical Machining Center Kao Ming KMC-1800DV Year of manufacture: 2002 Control: Heidenhain TNC 43 Program runtime: 48,000 h Spindle runtime: 10 h The spindle was completely renewed recently. Invoice available. Technical Data Spindle speed: 120 - 12,000 rpm Drive power: 25 kW (40%) Tool holder: SK 40 Number of magazine places: 32 pcs. Travel paths: X-axis: 1,940 mm Y-axis: 1,200 mm Z-axis: 500 mm Table to spindle nose distance: 150 - 650 mm Accessories: - Chip conveyor - High-pressure coolant system with 40 bar - Heidenhain probe Iaedpfsw Hnuvsx Addsl - Heidenhain tool length probe

Condition: new, Year of construction: 2024, MOBIL 2500 The mobile edge banding press. Ideal for constructing furniture! Technical Description MOBIL Typ 2500 (Typ 3000): > rigid, welded steel frame with fixed fences and spacer for massive, veneer and plastic edges > integrated electro heating rod made of resistant AL-alloy, lateral cut: 64 x 46 mm, controllable form 50 - 248°C , power 1200 (1459) Watt Ijdjyuv Tspfx Addjal > 4 (6) clamping and pressing aggregates, each aggregate mounted on 7 ball bearings; each aggregate has its own clamping and pressing cylinder; adjustable width of the work piece 12 - 105 mm. Width of massive surface to be glued on the work piece is about 50 mm > adjustable counter bearings for exact conformity of the edges > pressing cylinders and the counter bearings with vulcanised rubber plating's > fixed fences and spacer are covered by a special glue abrasive coating > the pneumatic pressing units are controllable separately, always pair wise; each pair: 1 shifter for: clamping of work pieces and 1 shifter for : pressing of work pieces > press is mobile on 4 guide rollers, 2 rollers with break > the press is equipped with a pneumatic maintenance unit, adapter 3/8 ´´, pressure controllable from 3-10 bar. Electric connection for the heating rods: 230 V, 50 Hz, 1200 (1450) Watt. working space w x h x d in mm: 2500 x 50 x 105 overall dimensions w x h x d in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL on request!!!

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Ijdpfx Adshz Dyasdjal

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. Ijdof U Spxjpfx Addjal The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Iaedpfjh Nmt Dox Addol inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: new, Year of construction: 2024, neu 2024 7314 prompt, Zwischenverkauf v Türkei 14800 € 284.16 € 1 2500 kg 1300 mm 450 mm 550 mm 600 mm 80 mm 1600 mm Iedpfx Aewirrkoddeal 1550 mm 2000 mm 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei Iedpjwirqajfx Addeal 12100 € 232.32 € 2500 kg 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 2500 600 M D1300) € 14.800,-- BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8200 € 158.26 € 1250 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times Iasdpfewirp Aex Addol photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 1250 400 M D1300) € 10.900,--

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm Iodpfx Adswirp Njdoal 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 2500 400 M D1300) € 14.500,--